Parting lineation (also known as current lineation or primary current lineation) is a subtle
sedimentary structure
Sedimentary structures include all kinds of features in sediments and sedimentary rocks, formed at the time of deposition.
Sediments and sedimentary rocks are characterized by bedding, which occurs when layers of sediment, with different partic ...
in which
sand
Sand is a granular material composed of finely divided mineral particles. Sand has various compositions but is defined by its grain size. Sand grains are smaller than gravel and coarser than silt. Sand can also refer to a textural class of s ...
grains are aligned in parallel lines or grooves on the surface of a body of sand (or lithified as a
sandstone
Sandstone is a clastic sedimentary rock composed mainly of sand-sized (0.0625 to 2 mm) silicate grains. Sandstones comprise about 20–25% of all sedimentary rocks.
Most sandstone is composed of quartz or feldspar (both silicates) ...
). The orientation of the lineation is used as a
paleocurrent
A paleocurrent or paleocurrent indicator is a geological feature (typically a sedimentary structure) that helps one determine the direction of flowing water in the geologic past. This is an invaluable tool in the reconstruction of ancient depositio ...
indicator, although the precise flow direction (i.e. upstream vs. downstream) is often indeterminable. They are also the primary indicator of the lower part of the upper flow regime
bedform
A bedform is a geological feature that develops at the interface of fluid and a moveable bed, the result of bed material being moved by fluid flow. Examples include ripples and dunes on the bed of a river. Bedforms are often preserved in the ro ...
.
Description
Parting lineation is a sedimentary structure commonly found on the surface of parallel-laminated sandstones. It is aligned with the current direction, the alignment holding out in places over several square meters. The lineation is formed by flat, parallel ridges which are separated by depressions or grooves. The height of the ridges rarely exceeds several grain diameters. In profile the depressions are flat-bottomed and the ridges are rounded. Ridges and depressions are arranged en echelon, so that in downstream direction the ridges pass into depressions and vice versa. The crosswise distance between individual ridges typically varies between 0.59 and 1.25 centimeters. Length as well as spacing of the ridges augments with increasing
grain size
Grain size (or particle size) is the diameter of individual grains of sediment, or the lithified particles in clastic rocks. The term may also be applied to other granular materials. This is different from the crystallite size, which refer ...
: in fine-grained sands the ridges are 3.5 to 12 centimeters long, whereas in medium-grained sands they can reach 30 centimeters in length. The long dimension of the ridges is therefore 5 to 20 times their crosswise spacing. The coarse(r) sediment fraction accumulates in the ridges, whereas dark
heavy minerals and
mica
Micas ( ) are a group of silicate minerals whose outstanding physical characteristic is that individual mica crystals can easily be split into extremely thin elastic plates. This characteristic is described as perfect basal cleavage. Mica is ...
trails take up an intermediate position between the ridges and the grooves.
Fabric
Statistical studies of the spatial arrangement of the sand grains (
fabric
Textile is an umbrella term that includes various fiber-based materials, including fibers, yarns, filaments, threads, different fabric types, etc. At first, the word "textiles" only referred to woven fabrics. However, weaving is not the ...
) show that in the horizontal plane the long axes of the grains form two symmetrical
maxima oriented at an angle of 10 to 20 ° to the current direction. In the vertical plane these maxima are inclined at an angle of 8 to 10 ° into the current direction and the sand grains are
imbricated.
Genesis of the structure
It is meanwhile widely accepted that parting lineation forms in the turbulent, viscous
boundary layer
In physics and fluid mechanics, a boundary layer is the thin layer of fluid in the immediate vicinity of a bounding surface formed by the fluid flowing along the surface. The fluid's interaction with the wall induces a no-slip boundary condi ...
immediately above the sediment-water interface. Responsible for the shaping of the structures are streaky
vortex
In fluid dynamics, a vortex ( : vortices or vortexes) is a region in a fluid in which the flow revolves around an axis line, which may be straight or curved. Vortices form in stirred fluids, and may be observed in smoke rings, whirlpools in th ...
trains within the boundary layer. Downcurrent these
streaks start to gradually lift off from the sediment surface until they eventually “burst”. Whenever this happens fluid rushes in from both sides. This cyclic process of lift-off, bursting and inrush of fluid exerts a shear stress on the sediment surface, which ultimately finds its expression in the spatial arrangement of the sediment grains. After all it is this lateral inrush of fluid, which “sweeps up” the grains in the grooves and redeposits them in long parallel ridges underneath the lifting turbulences. This rhythmical process is known as ''burst and sweep''.
Mode of occurrence
Parting lineation is restricted to coarse
silt
Silt is granular material of a size between sand and clay and composed mostly of broken grains of quartz. Silt may occur as a soil (often mixed with sand or clay) or as sediment mixed in suspension with water. Silt usually has a floury feel when ...
s as well as to fine- and medium-grained sands (i. e. to grain sizes of 16 to 500 µ). The structure very rarely occurs in coarser sediments.
Hydraulically
Hydraulics (from Greek language, Greek: Υδραυλική) is a technology and applied science using engineering, chemistry, and other sciences involving the mechanical properties and use of liquids. At a very basic level, hydraulics is th ...
it is characteristic for the lower part of the
upper plane bed
A bedform is a geological feature that develops at the interface of fluid and a moveable bed, the result of bed material being moved by fluid flow. Examples include ripples and dunes on the bed of a river. Bedforms are often preserved in the roc ...
regime and results from fairly high
current velocities of 0.6 to 1.3 meters per second.
Parting lineation forms in very different
depositional environment
In geology, depositional environment or sedimentary environment describes the combination of physical, chemical, and biological processes associated with the deposition of a particular type of sediment and, therefore, the rock types that will be ...
s. The structure is most commonly found on the
beach
A beach is a landform alongside a body of water which consists of loose particles. The particles composing a beach are typically made from rock, such as sand, gravel, shingle, pebbles, etc., or biological sources, such as mollusc shel ...
where it forms in flat, wet sediments due to
swash
Swash, or forewash in geography, is a turbulent layer of water that washes up on the beach after an incoming wave has broken. The swash action can move beach materials up and down the beach, which results in the cross-shore sediment exchange. T ...
. Parting lineation can also be created in dewatering tidal channels. Geological
formations like for instance the
Old Red Sandstone
The Old Red Sandstone is an assemblage of rocks in the North Atlantic region largely of Devonian age. It extends in the east across Great Britain, Ireland and Norway, and in the west along the northeastern seaboard of North America. It also exte ...
or the
Buntsandstein
The Buntsandstein (German for ''coloured'' or ''colourful sandstone'') or Bunter sandstone is a lithostratigraphy, lithostratigraphic and allostratigraphy, allostratigraphic unit (a sequence of rock strata) in the Subsurface (geology), subsurface ...
also give proof of the shallow marine character. Parting lineation has even been described from
turbidite
A turbidite is the geologic deposit of a turbidity current, which is a type of amalgamation of fluidal and sediment gravity flow responsible for distributing vast amounts of clastic sediment into the deep ocean.
Sequencing
Turbidites were ...
s. Yet the structure is not only restricted to the marine environment, it can also form in
river
A river is a natural flowing watercourse, usually freshwater, flowing towards an ocean, sea, lake or another river. In some cases, a river flows into the ground and becomes dry at the end of its course without reaching another body of wate ...
sediments, especially on
point bar
A point bar is a depositional feature made of alluvium that accumulates on the inside bend of streams and rivers below the slip-off slope. Point bars are found in abundance in mature or meandering streams. They are crescent-shaped and located on ...
s.
Parting-step lineation, which is characterized by step-like parting surfaces, has been reported by Banerjee from
varve
A varve is an annual layer of sediment or sedimentary rock.
The word 'varve' derives from the Swedish word ''varv'' whose meanings and connotations include 'revolution', 'in layers', and 'circle'. The term first appeared as ''Hvarfig lera'' (var ...
s deposited in
glacial lake
A glacial lake is a body of water with origins from glacier activity. They are formed when a glacier erodes the land and then melts, filling the depression created by the glacier.
Formation
Near the end of the last glacial period, roughly 10,0 ...
s.
Parting lineation was even artificially reproduced in hydraulic experiments.
Remark: in the marine environment parting lineation doesn't have to be associated solely with the upper plane bed regime, it has been reported for instance from the erosive stoss side of
ripple mark
In geology, ripple marks are sedimentary structures (i.e., bedforms of the lower flow regime) and indicate agitation by water (current or waves) or wind.
Defining ripple cross-laminae and asymmetric ripples
* ''Current ripple marks'', ''unidi ...
s,
megaripple
In geology, ripple marks are sedimentary structures (i.e., bedforms of the lower flow regime) and indicate agitation by water (current or waves) or wind.
Defining ripple cross-laminae and asymmetric ripples
* ''Current ripple marks'', ''unid ...
s and
dune
A dune is a landform composed of wind- or water-driven sand. It typically takes the form of a mound, ridge, or hill. An area with dunes is called a dune system or a dune complex. A large dune complex is called a dune field, while broad, f ...
s. This implies that the structure can form already under lower current velocities.
Due to its varied and rather widespread occurrence parting lineation is not a unanimous indicator for depositional environments.
Theoretical considerations
In order to derive an expression for the crosswise spacing of parting lineation it is useful to start with the quadratic stress law:
τ = 1/8*f*ρ*U
m2
The
shear stress
Shear stress, often denoted by (Greek: tau), is the component of stress coplanar with a material cross section. It arises from the shear force, the component of force vector parallel to the material cross section. ''Normal stress'', on the ot ...
τ exerted by the current within the boundary layer is proportional to the square of the current velocity U. The
Darcy-Weisbach friction coefficient f and the
density
Density (volumetric mass density or specific mass) is the substance's mass per unit of volume. The symbol most often used for density is ''ρ'' (the lower case Greek letter rho), although the Latin letter ''D'' can also be used. Mathematical ...
of the fluid ρ are constants.
Empirical studies have found a dimensionless value Z = 100 for the parallel streaks/ridges. This can be equated to:
Z = 100 = ρ/η*U
t*λ
where λ represents the measured spacing, U
t the shearing velocity and η the
viscosity
The viscosity of a fluid is a measure of its resistance to deformation at a given rate. For liquids, it corresponds to the informal concept of "thickness": for example, syrup has a higher viscosity than water.
Viscosity quantifies the inte ...
of the fluid.
We also have the following equality:
U
t = (τ/ρ)
1/2 which yields after solving for τ:
τ = U
t2*ρ
After equating the two expressions for τ and some rearrangements one arrives at an expression for the crosswise spacing λ:
λ = 100*(η/ρ)*(8/U
m2*f)
1/2
By inserting the following realistic values one finds for λ:
η = 1.06*10
−3 a*s
ρ = 1000
3">g/m3
f = 0.01
U
m = 1
/s
λ = 100*1.06*10
−6*(800)
1/2 = 1.06*10
−4*28.28
λ = 2.998*10
−3
The calculated crosswise spacing λ is 3 millimeters. This value is in fairly close agreement with the experimental values measured by Allen, which are nevertheless generally 2 to 4 times higher. The discrepancy can be explained by assuming that only strongly developed streaks leave a discernible ridge.
Conclusions
Parting lineation is a very good indicator of the reigning current direction (and therefore also a good
paleocurrent
A paleocurrent or paleocurrent indicator is a geological feature (typically a sedimentary structure) that helps one determine the direction of flowing water in the geologic past. This is an invaluable tool in the reconstruction of ancient depositio ...
indicator).
[Shelton, J. W. et al. (1974). Directional features in braided-meandering stream deposits, Cimarron River, North-Central Oklahoma. J. Sediment. Petrol., 44, page 742 – 749] An analysis of the grain fabric furthermore leads to the determination the
younging direction within the sedimentary succession. The lower part of the upper plane bed hydraulic regime of relatively swift currents is characterized by parting lineation.
References
Sedimentary structures