Cripple Track
   HOME

TheInfoList



OR:

A RIP track, short for ''repair in place'' track, (also known as a "cripple track" in slang terms) is a designated
track Track or Tracks may refer to: Routes or imprints * Ancient trackway, any track or trail whose origin is lost in antiquity * Animal track, imprints left on surfaces that an animal walks across * Desire path, a line worn by people taking the shorte ...
, or tracks, in a rail yard or a
siding Siding may refer to: * Siding (construction), the outer covering or cladding of a house * Siding (rail) A siding, in rail terminology, is a low-speed track section distinct from a running line or through route such as a main line, branch l ...
along a section of a main rail line where
locomotive A locomotive or engine is a rail transport vehicle that provides the Power (physics), motive power for a train. If a locomotive is capable of carrying a payload, it is usually rather referred to as a multiple unit, Motor coach (rail), motor ...
s and/or
railroad car A railroad car, railcar (American and Canadian English), railway wagon, railway carriage, railway truck, railwagon, railcarriage or railtruck (British English and UIC), also called a train car, train wagon, train carriage or train truck, is a ...
s can be placed for minor repairs. A RIP tracks allows for minor repairs to be done without removing the units from service and sometimes allows for these repairs to be done without removing a freight load from the car. In some yards, a RIP track may be used for staging locomotives or damaged cars for major repairs and some rail yards may have more than one RIP track to serve both functions.


Usage

When it is discovered that an unloaded freight car requires repairs, they are normally sent to the repair shops. However, mechanical defects often do not show up, or are not discovered, until after a freight car has been loaded and is in transit. Obviously, it would be expensive and entail considerable delay to have to unload a defective car and transfer the load onto another car before the cargo can continue its journey. Often the repairs required are of a minor nature and such as may be taken care of in a short time with the proper facilities without unloading a car. It is for the repair of loaded freight cars that a RIP track or RIP track operation is specifically provided. As is well understood in railroading, loaded freight cars requiring repair before they can safely continue to destination, are removed from the train and delivered to the incoming side of a rip track which area is commonly referred to as the "bad order" area. From the bad order area the cars are moved into the middle portion of the rip track which is referred to as the "repair" area. Seeing as most of the repairs have to do largely with the car trucks or under frame, jacks are used in the repair area for lifting the cars in various ways and locations. Therefore these jacks can be easily moved alongside the track or tracks in the repair area. Once the cars have been repaired they are removed from the repair area into the discharge side of the rip track which is referred to as the "OK" area.
Switcher A switcher, shunter, yard pilot, switch engine, yard goat, or shifter is a small railroad locomotive used for manoeuvring railroad cars inside a rail yard in a process known as ''switching'' (US) or ''shunting'' (UK). Switchers are not inten ...
locomotives are used for delivering defective loaded cars to the RIP track and for removing them after they are repaired.


Gallery

File:Jack Delano - C & NW RR, putting the finishing touches on a rebuilt caboose at the rip tracks at Proviso yard, Chicago, Ill..jpg, A railway worker putting the finishing touches on a rebuilt caboose on the RIP tracks at Proviso yard, Chicago File:Painting a car at the repair or "rip" tracks at North Proviso(?), C & NW RR (i.e. Chicago and North Western railroad), Chicago, Ill. LCCN2017878018.tif, A boxcar being painted on the RIP tracks at Proviso yard, Chicago File:Car jacked up for repairs on the repair tracks, North Proviso, C & NW RR (i.e. Chicago and North Western railroad) Chicago, Ill. LCCN2017878025.tif, A boxcar being jacked up for repairs on the RIP tracks at Proviso yard, Chicago File:On the 'RIP' tracks (Repair In Place), an Illinois Central employee jacks up a gondola to swap out a truck during November, 1942. Jack Delano photo.jpg, A railroad employee jacking up a gondola car to swap out a truck


In popular culture

A RIP track is featured in the 2010 action-thriller film Unstoppable. In the film the protagonists and their locomotive use a RIP track to avoid a head-on collision with 777, the film's runaway locomotive, after being unable to fit into an earlier siding due to the length of their train.


References

{{DEFAULTSORT:Rip Track Railway track layouts