The crankset (in the US) or chainset (in the UK), is the component of a
bicycle drivetrain that converts the
reciprocating motion
Reciprocating motion, also called reciprocation, is a repetitive up-and-down or back-and-forth linear motion. It is found in a wide range of mechanisms, including reciprocating engines and pumps. The two opposite motions that comprise a single r ...
of the rider's
legs
A leg is a weight-bearing and locomotive anatomical structure, usually having a columnar shape. During locomotion, legs function as "extensible struts". The combination of movements at all joints can be modeled as a single, linear element ...
into rotational motion used to drive the
chain or
belt
Belt may refer to:
Apparel
* Belt (clothing), a leather or fabric band worn around the waist
* Championship belt, a type of trophy used primarily in combat sports
* Colored belts, such as a black belt or red belt, worn by martial arts practit ...
, which in turn drives the rear
wheel. It consists of one or more
sprocket
A sprocket, sprocket-wheel or chainwheel is a profiled wheel with teeth that mesh with a roller chain, chain, Caterpillar track, track or other perforated or indented material. The name 'sprocket' applies generally to any wheel upon which radial ...
s, also called ''chainrings''
or ''chainwheels''
attached to the ''
cranks'', ''arms'', or ''crankarms'' to which the pedals attach. It is connected to the rider by the
pedals
A pedal (from the Latin '' pes'' ''pedis'', "foot") is a lever designed to be operated by foot and may refer to:
Computers and other equipment
* Footmouse, a foot-operated computer mouse
* In medical transcription, a pedal is used to control ...
, to the bicycle frame by the
bottom bracket
The bottom bracket on a bicycle connects the crankset (chainset) to the bicycle and allows the crankset to rotate freely. It contains a spindle to which the crankset attaches, and the bearings that allow the spindle and crankset to rotate. The ...
, and to the rear sprocket,
cassette
Cassette may refer to:
Technology
* Cassette tape (or ''musicassette'', ''audio cassette'', ''cassette tape'', or ''tape''), a worldwide standard for analog audio recording and playback
** Cassette single (or "Cassingle"), a music single in th ...
or
freewheel
Freewheel mechanism
In mechanical or automotive engineering, a freewheel or overrunning clutch is a device in a transmission that disengages the driveshaft from the driven shaft when the driven shaft rotates faster than the driveshaft. An ...
via the chain.
Parts
Cranks
The two ''cranks'', one on each side and usually mounted 180° apart, connect the bottom bracket axle to the pedals.
Lengths
![Cottered crank](https://upload.wikimedia.org/wikipedia/commons/4/4f/Cottered_crank.JPG)
Bicycle cranks can vary in length to accommodate different sized riders and different types of cycling. Crank length is measured from the center of the pedal spindle to the center of the bottom bracket spindle or axle. The larger bicycle component manufacturers typically offer crank lengths for adult riders from long in increments, with cranks being the most common size. A few small specialty manufacturers make bicycle cranks in a number of sizes smaller than and longer than . Some manufacturers also make bicycle cranks that can be adjusted to different lengths. While logic would suggest that, all other things being equal, riders with shorter legs should use proportionally shorter cranks and those with longer legs should use proportionally longer cranks, this is not universally accepted. However, very few scientific studies have definitively examined the effect of crank length on sustained cycling performance and the studies' results have been mixed. Bicycle crank length has not been easy to study scientifically for a number of reasons, chief among them being that cyclists are able to physiologically adapt to different crank lengths. Cyclists are typically more efficient pedalling cranks with which they have had an adaptation period. Several different formulas exist to calculate appropriate crank length for various riders. In addition to the rider's size, another factor affecting the selection of crank length is the rider's cycling specialty and the type of cycling event. Historically, bicycle riders have typically chosen proportionally shorter cranks for higher cadence cycling such as criterium and track racing, while riders have chosen proportionally longer cranks for lower cadence cycling such as time trial racing and mountain biking. However, the evolution of very low rider torso positions to reduce aerodynamic drag for time trial racing and triathlon cycling can also affect crank selection for such events. Some have suggested that proportionally shorter cranks may have a slight advantage for a rider with a very low torso position and an acute hip angle, especially as the rider pedals near the top-dead-center position of the pedal stroke. Cranks can be shortened for medical reasons using shorteners such as
Ortho Pedal.
Unicycle cranks vary in length to accommodate different unicycle wheel sizes, and different unicycling disciplines. As almost all unicycles are ungeared, crank length is a major factor in determining how much force is transmitted to the wheel. Larger wheel diameters, such as , require longer cranks, as do disciplines such as Mountain Unicycling, Trials, Street, and Flatland. These unicycles and disciplines commonly use cranks lengths greater than . For indoor unicycling such as freestyle or hockey, shorter cranks give a smoother pedaling motion and enable tighter turns without the pedal hitting the floor. Crank lengths of are common, although some riders use cranks as short as .
As there is no chainwheel on a unicycle, right and left cranks are identical, except for the pedal attachment thread in the left-hand crank, which is reverse threaded.
Materials
Cranks are constructed of either an
aluminum alloy,
titanium
Titanium is a chemical element with the Symbol (chemistry), symbol Ti and atomic number 22. Found in nature only as an oxide, it can be reduced to produce a lustrous transition metal with a silver color, low density, and high strength, resista ...
,
carbon fiber
Carbon fiber-reinforced polymers (American English), carbon-fibre-reinforced polymers (Commonwealth English), carbon-fiber-reinforced plastics, carbon-fiber reinforced-thermoplastic (CFRP, CRP, CFRTP), also known as carbon fiber, carbon compo ...
,
chromoly steel, or some less expensive
steel. Tubular steel cranks (such as Tioga's Revolver) can be light and very strong, are usually found on BMX bikes, and are slowly finding their way to mountain bikes (dirt jumping and urban assault). Aluminum cranks may be cast, hot forged or cold forged ("cold" in this context means the billet from which the crank is to be made is heated to a specified temperature well below the melting point, not room temperature). Cold forging gives the metal additional strength, and the cranks can therefore be made lighter without increasing the risk of breakage. Shimano "Hollowtech" aluminum cranks are made by forging the main arms around a hard steel insert which is then withdrawn, leaving an internal void to save weight. They are then welded up before final machining.
Attachments
= To the bottom bracket
=
![One-piece crank](https://upload.wikimedia.org/wikipedia/commons/6/61/One-piece_crank.JPG)
There are a variety of methods used to attach the cranks to the bottom bracket spindle (or axle).
* Older cranks use a wedge-shaped pin, called a
cotter, for attachment to the bottom bracket spindle.
* Newer cranks slide onto
** a square tapered spindle. The taper is 2 degrees with respect to the centerline. There are at least two non-interchangeable dimensions (e.g. Shimano and
Campagnolo use competing standards in square taper, viz. JIS and ISO respectively, where the ISO spindle is longer and its taper end is slightly smaller. Most parts made by European manufacturers are to the ISO standard, and most Asian manufacturers use the JIS (Shimano) standard), and two orientations: diamond and horizontal square. The hole in the crank in which one screws a crank puller almost always has a diameter of , though some old French cranks (Stonglight and T.A.) require a different puller.
** a hexagonal tapered spindle (Tune components cranks are an example)
** a
splined bottom bracket spindle with two prominent specifications, and numerous uncommon ones. The
ISIS
Isis (; ''Ēse''; ; Meroitic: ''Wos'' 'a''or ''Wusa''; Phoenician: 𐤀𐤎, romanized: ʾs) was a major goddess in ancient Egyptian religion whose worship spread throughout the Greco-Roman world. Isis was first mentioned in the Old Kin ...
spline may be the most common splined standard as it was decided on and supported by several companies. Shimano's
Octalink
The bottom bracket on a bicycle connects the crankset (chainset) to the bicycle and allows the crankset to rotate freely. It contains a spindle to which the crankset attaches, and the bearings that allow the spindle and crankset to rotate. The ...
is a common proprietary standard that comes in two forms: version one for XTR, 105, Ultegra and Dura Ace; and version two for every other groupset such as XT, LX and Deore. Truvativ and DMR also have their own proprietary spline interface standards. A 48 splined spindle, such as from Profile Racing, Demolition, and Eighth Inch, is mostly used for
BMX,
unicycles, and
fixed-gear
A fixed-gear bicycle (or fixed-wheel bicycle, commonly known in some places as a fixie) is a bicycle that has a drivetrain with no freewheel mechanism. The freewheel was developed early in the history of bicycle design but the fixed-gear bicy ...
Freestyle.
:The cranks are pressed into place and prevented from squirming off via
fretting
Fretting refers to wear and sometimes corrosion damage of loaded surfaces in contact while they encounter small oscillatory movements tangential to the surface. Fretting is caused by adhesion of contact surface asperities, which are subsequent ...
by a bolt or nut installed into or onto the bottom bracket spindle. The head of the bolt or the nut sits inside a
counterbore
A counterbore (symbol: ⌴) is a cylindrical flat-bottomed hole that enlarges another coaxial hole, or the tool used to create that feature. A counterbore hole is typically used when a fastener, such as a socket head cap screw or fillister head ...
that is also threaded to accept a crank puller tool. The counterbore is often covered with a dust cover.
One solution to the issue of fretting is to use a metal based
anti-seize Grease is a solid or semisolid lubricant formed as a dispersion of thickening agents in a liquid lubricant. Grease generally consists of a soap emulsified with mineral or vegetable oil.
A common feature of greases is that they possess a high init ...
lubricant between the mating parts. Composed of assorted mixtures of aluminum, copper, graphite and nickel powders in a grease base, such lubrication allows repeated assembly and disassembly without wear and the elimination of fretting corrosion during use.
* Even newer designs have the bottom bracket spindle, usually hollow and larger diameter than is possible for bottom brackets with bearings held inside the bottom bracket shell of a bike frame, for reduced weight and increased stiffness, permanently attached to the right crank (Shimano and others) or the left crank (Race Face). The left crank slides onto a spline and is tightened with one or more pinch bolts (Shimano) or is pressed onto a spline by a bolt on the bottom bracket spindle (Race Face).
* The latest from
Campagnolo, called
Ultra-Torque, has each crank permanently attached to one half of the spindle (called semi-axles) which then join in the middle of the bottom bracket with a
Hirth joint
A Hirth joint or Hirth coupling is a type of mechanical connection named after its developeAlbert Hirth It is used to connect two pieces of a shaft together and is characterized by tapered teeth that mesh together on the end faces of each half sha ...
and a bolt.
* Certain companies such as Cannondale (BB30 open standard, introduced in 2000) have made their own unique bottom bracket standards requiring changes in the bottom bracket shell of the bicycle frame in order to accommodate the bottom bracket/crank design. The open BB30 standard is gaining popularity on high end bicycle and component manufacturers (Zipp, Specialized, FSA).
* Finally, many children's bikes and older, or less-expensive bikes have one-piece ("Ashtabula") cranks where the two cranks and bottom bracket spindle are forged as one piece of steel (see photograph above).
See the
bottom bracket
The bottom bracket on a bicycle connects the crankset (chainset) to the bicycle and allows the crankset to rotate freely. It contains a spindle to which the crankset attaches, and the bearings that allow the spindle and crankset to rotate. The ...
article for more details.
= To the pedals
=
![Pedalarm Bruch](https://upload.wikimedia.org/wikipedia/commons/9/96/Pedalarm_Bruch.jpg)
Crank arms have a threaded hole (or "eye") at their outboard end to accommodate the pedal spindle. Adult or multi-piece cranks have a 9/16 inch hole with
20 TPI (a combination that appears to be unique to this application). One-piece or children's cranks use a 1/2 inch hole. Some cranks on children's bikes have more than one pedal hole so that the pedal can be moved to accommodate growth.
The right-side (usually the chain side) hole is right-hand threaded, and the left-side hole is left-hand (reverse) threaded to help prevent it from becoming unthreaded by an effect called
precession
Precession is a change in the orientation of the rotational axis of a rotating body. In an appropriate reference frame it can be defined as a change in the first Euler angle, whereas the third Euler angle defines the rotation itself. In oth ...
.
Pedal spindles are hard steel, and gradually fret and erode the crankarm where the two meet. This can eventually be a cause of crank breakage, which commonly occurs at the pedal eye. Some manufacturers advise the use of a thin steel washer between the pedal and crank, but this is ineffective because the hard washer frets against the crank instead. A solution, suggested by
Jobst Brandt
Jobst Brandt (January 14, 1935 – May 5, 2015) was an American mechanical engineer, inventor, bicycle enthusiast, educator, and author.
Early life
Brandt was born in New York City, where his father, the German-born agricultural economist Karl B ...
, is to use a 45 degree taper at the surface where crank and pedal meet, as this would eliminate precession-induced fretting and loosening (it is already done for most automobile
lug nut
A lug nut or wheel nut is a fastener, specifically a nut, used to secure a wheel on a vehicle. Typically, lug nuts are found on automobiles, trucks (lorries), and other large vehicles using rubber tires.
Design
A lug nut is a nut fastener ...
s for the latter reason). However, this would require manufacturers to change a well-established standard which currently allows most pedals to be fitted to most cranks.
The solution to the issue of fretting is to use a metal based anti-seize lubricant; being composed of assorted mixtures of aluminium, copper, graphite and nickel powders in a grease base – that allows repeated assembly and disassembly without wear and the elimination of fretting corrosion during use.
Spider
On older styles, the ''spider''—the multi-armed piece that connects the chainring to the bottom bracket axle—was a separate piece from the crank arm. The most common modern cranks have an integrated spider on the drive-side crank arm. However, Middleburn, TA, and
Surly currently produce cranks with separate detachable spiders, enabling a wide variety of chainring patterns to be used with the same cranks.
Spiders usually have 4 or 5 arms, although some models have had as few as 3 and many as 10 arms with 6 having been popular in the past.
Bolt circle diameter (BCD)
![Silver chain ring bolt 2a](https://upload.wikimedia.org/wikipedia/commons/a/aa/Silver_chain_ring_bolt_2a.jpg)
Many modern bicycles have removable chainrings, to allow for replacement when worn, or to change the gear ratio provided (although the change is limited).
The holes on the spider arms used for attaching a chainring can have a variety of dimensions, referred to as the
bolt circle
A bolt circle diameter or pitch circle diameter (PCD), sometimes simply called bolt circle or pitch circle, is a common term for when a number of screw holes for bolts are evenly distributed with their centers along an imaginary circle with a giv ...
diameter, commonly abbreviated as BCD. This measurement is sometimes referred to as pitch-circle diameter (PCD). Cranks designed to mount one or two chainrings will almost always use a single bolt circle diameter. Cranks designed to mount three chainrings will almost always use two different bolt circle diameters; the larger to mount the two outer rings and the smaller to mount the inner ring. Most modern two-chainring cranks use either a bolt circle diameter.
Bolt circle diameters of common cranks:
; vintage single 151 BCD
; vintage double 144 BCD
; Single : 130, 135, or 144 BCD
; Road double : 130 BCD (Shimano and others), 135 (Campagnolo), or 122 (others)
; Road triple : 130/74 BCD (Shimano and others), or 135/74 BCD (Campagnolo)
;
Cyclocross/compact/touring double : 110 BCD or (Campagnolo carbon 4×110/1×113 BCD)
; Mountain bike(5 arm)/compact/touring triple : 110/74 BCD
; Mountain bike (4 arm): 104/64 BCD
; Mountain bike (5 arm compact) : 94/58 BCD
; Single, double or triple (3 arm) : 70 BCD (René Herse/Compass Bicycles)
Chainring
![Kettenblatt](https://upload.wikimedia.org/wikipedia/commons/2/24/Kettenblatt.jpg)
''Chainrings'' (also called "chain rings", "chainwheels" or "sprockets", although sprocket is used this way mostly in the
BMX community
) engage the
chain to transfer power to the (usually rear)
wheel. They usually have teeth spaced to engage every link of the chain as it passes over; however, in the past, some designs (called skip-tooth or inch-pitch) have had one tooth for every other link of the chain.
Sizes
By convention, the largest chainring is outboard and the smallest is inboard. Chainrings vary in size from as few as 20 teeth to as many as 60 and potentially more.
Chainrings also come in several nominal widths:
* 3/16" (4.76 mm) for old-time bikes (especially skip-tooth or inch-pitch), heavy duty BMX,
Worksman, and exercise bikes
* 1/8" (3.18 mm) for track, BMX, cruiser bikes, one-speed, three-speeds, and the rare older 3 or 4 speed derailleur bike.
* 3/32" (2.38 mm) for road, hybrid, mountain bikes, single-speed and 5-, 6-, 7- and 8 speed freewheels or cassettes.
* 5/64" (1.98 mm) for any bike with 9- or 10-speed cassettes
Materials
Chainrings are constructed of either an aluminum alloy, titanium, steel, or carbon fiber.
Construction
Cheaper cranksets may have the chainrings welded or riveted directly to the crank arm or spider. More expensive sets have the chainrings bolted on so that they can be replaced if worn or damaged, or to provide different gearing.
Replacement chainrings must be chosen with a bolt-hole count and spacing that matches the spider.
Chainrings designed for use with multi-chainring crank arms may have ramps or pins to aid in shifting. The middle chainring, in the case of a triple crankset, usually has the most shaping to aid in shifting up and down. The smallest chainring usually has the least, if any shaping.
Variations
Tandem cranksets
On
tandem bicycle
A tandem bicycle or twin is a form of bicycle (occasionally a tricycle) designed to be ridden by more than one person. The term tandem refers to the seating arrangement (fore to aft, not side by side), not the number of riders. Patents relat ...
s the pedalling contribution of both riders is often combined and coordinated by the crank arms. There may be a second set of chainrings, often on the opposite side from the regular drive train, one on each crank set and connected by a separate chain. The most common implementation has both cyclists pedaling at exactly the same pace and usually in phase, although it is possible to configure the system for out-of-phase pedaling.
The most common tandem crankset is a set of four cranks. Both left cranks have spiders and chainrings to be connected by a
timing chain
In a piston engine, either a timing belt (also called a ''cambelt'') or timing chain or set of timing gears is used to synchronize the rotation of the crankshaft and the camshaft. This synchronisation ensures that the engine's valves open and cl ...
, and only one of the right cranks has a spider for the drive chain.
There are tandem cranksets available called independent pedaling system cranksets, which allow each cyclist to pedal, or not, at their own pace.
Chain guards
Some chainrings can be outfitted with a
chain guard
A gear case, also known as a chain case or chainguard, is an enclosure for the bicycle chain and sprocket assemblages commonly employed by utility bicycles. It serves to protect the cyclist from being soiled or trapped in the chain rings and ten ...
— a plastic or metal ring slightly larger in diameter than the chainring. Its purpose is mostly to help prevent the chain from touching or catching clothing. Chain guard is usually mounted on the outboard side of the chainring or, in case of multi-sprocket chainring, on the outboard side of the largest chainring. Single-sprocket chainrings may have chain guards on both inboard and outboard sides, helping keeping the chain on the chainring; this is common on multi-speed juvenile bicycles.
Bicycles that are going to be used in abusive applications, such as
freeride and
BMX, will often incorporate a very heavy-duty chain guard that is designed to protect the chainrings from physical damage caused by impact with fixed objects; also called 'bashguards', these commonly replace a third (large) chainring.
Chainguides
Some cranksets used for freeride and
downhill
Downhill may refer to:
Arts and entertainment
* ''Downhill'' (1927 film), a British film by Alfred Hitchcock
* ''Downhill'' (2014 film), a British comedy directed by James Rouse
* ''Downhill'' (2016 film), a Chilean thriller directed by Patrici ...
mountain biking have a chainguide installed. A chainguide is a metal or plastic housing that keeps the chain on the chainrings over rough terrain and during technical riding. Most chainguides are designed for only one front chainring, but there are a few dual-ring chainguides available such as the E13 DRS and MRP LRP. Chainguides include a channel on the top of the chainring to keep the chain in line (for models designed for one front chainring) and a roller or sprocket on the bottom to help keep the chain engaged with the chainring. These are almost always used in conjunction with bashguards. Exceptions including the E.thirteen LG-1 and the MRP G2 (and now the G2 SL) do exist which use integrated skid plates, removing impact forces from the crank's spider and transferring them to the frame.
Freewheeling cranksets
Some cranksets have been produced that incorporate a ratcheting mechanism to accommodate coasting. In this case, the chain continues to rotate with the rear wheel when the rider stops pedaling. The ultimate goal of freewheeling cranks is to allow the rider to shift the chain while coasting. Shimano's discontinued FF system (
Front Freewheeling) is one of the more commonly seen examples.
Left-side-drive
This configuration consists of a left crank arm with a spider and chainring, and a right crank arm without a spider, the opposite of a normal configuration. If used with a screw-on freewheel, a special hub with a left hand thread for a special freewheel must be used, which is also threaded left hand and ratchets the opposite direction of a normal freewheel. If the freewheel and hub were threaded with right hand threads, the torque applied by pedaling would loosen and unthread the freewheel from the hub.
Left-side-drive is sometimes done with a
fixed gear drivetrain. Because the lock ring prevents the sprocket from unscrewing, it can be used for left-side drive without requiring special left hand threaded parts.
Note that if a normal right-side-drive crankset is installed backwards to create a left-side-drive bicycle, the threaded
pedal
A pedal (from the Latin '' pes'' ''pedis'', "foot") is a lever designed to be operated by foot and may refer to:
Computers and other equipment
* Footmouse, a foot-operated computer mouse
* In medical transcription, a pedal is used to control p ...
holes at the end of the crank arms would be reversed. In this configuration,
precession
Precession is a change in the orientation of the rotational axis of a rotating body. In an appropriate reference frame it can be defined as a change in the first Euler angle, whereas the third Euler angle defines the rotation itself. In oth ...
may loosen the pedals over time, causing the pedals to become detached and/or damaging the pedal threading in the crank arms. A front crankset designed for tandem use is a commercially available option, since this has a chainring for the timing chain on the left side, though choice of chainring sizes may be limited.
Independent crank arms
At least one manufacturer offers a crankset in which the crank arms may rotate independently. This is supposed to aid in training by requiring each leg to move its own pedal in a full circle. One independent study has demonstrated training with these cranks can improve cycling efficiency. The manufacturer also claims that this change can also be useful to aid in running improvement, help prevent injuries in runners, improve core strength development, and are useful for the rehabilitation of lower extremity injuries, especially in the athlete. The manufacturer claims these cranks have been used as a training tool by several World and Olympic Champions in both cycling and triathlon and several professional sports teams including MLB and NFL teams, and other uses.
Non-round chainrings
![Rotor Cervelo crankset Osymetric chainrings](https://upload.wikimedia.org/wikipedia/commons/2/2b/Rotor_Cervelo_crankset_Osymetric_chainrings.JPG)
After a first product commercialized in the late 1970s by
Edmond Polchlopek, several manufacturers have tried non-round chainrings, such as Shimano's
Biopace
Biopace is a tradename for a type of ovoid bicycle chain ring manufactured by Shimano from 1983 to 1993
The design was intended to help overcome the "dead zone" where the crank arms are vertical and riders have little mechanical advantage.
Bi ...
, Rotor's Q-Rings, Ridea's PowerRing and
Osymetric
Osymetric is a French make of ovoid bicycle chainring which has a non-circular shape whose angle is tailored to the pedal stroke of the individual cyclist. These were designed by engineer Jean-Louis Talo who claims that this improves cycling perf ...
's Harmonic ring. These are designed to provide varying
mechanical advantage
Mechanical advantage is a measure of the force amplification achieved by using a tool, mechanical device or machine system. The device trades off input forces against movement to obtain a desired amplification in the output force. The model for ...
at different points in the pedal stroke, effectively changing the gear ratio at different angles of rotation with the intention to be more ergonomic. Non-round chainrings can sometimes cause problems in front shifting. Though the benefits of oval chainrings are still disputed in the press and among manufacturers, one study claimed significant benefits, namely that the rider would gain an additional 8 watts of power.
Their popularity in the late eighties to early nineties is best reflected in their widespread use by professional cyclists of that time. However, one hold-out has been
Team CSC Saxo Bank veteran
Bobby Julich
Robert Julich ( ), popularly called Bobby Julich, (born on November 18, 1971, in Corpus Christi, Texas) is an American former professional road bicycle racer who last rode for Team CSC in the UCI ProTour racing series. He got his international ...
, and there are still a couple of pro riders using them as late as 2011. Notably
Bradley Wiggins
Sir Bradley Marc Wiggins, CBE (born 28 April 1980) is a British former professional road and track racing cyclist, who competed professionally between 2001 and 2016. He began his cycling career on the track, but later made the transition to r ...
of
Team Sky
Ineos Grenadiers () (stylised as INEOS Grenadiers) (formerly Team Sky from 2010 to 2019, and Team Ineos from 2019 to 2020) is a British professional cycling team that competes at the UCI WorldTeam level. The team is based at the National Cycl ...
, David Millar of Team Garmin Transitions and
Agritubel
Agritubel Pro Cycling Team () was a French professional road race cycling team. The team's title sponsorAgritubel is a manufacturer and supplier of tubular metal products for cattle, livestock and farming.
Agritubel mostly competed for wins at t ...
's
Geoffrey Lequatreall riding the Osymetric brand and
Team CSC Saxo Bank's
Carlos Sastre
Carlos Sastre Candil (; born 22 April 1975) is a former Spanish professional road bicycle racer and winner of the 2008 Tour de France. He consistently achieved outstanding results in the Vuelta a España and in the Tour de France. Sastre establ ...
with Rotor's Q-Rings from his native Spain. Sastre won the 2008 Tour de France with Q-rings. Bradley Wiggins has used an elliptical chainring from Osymetric since at least 2009,
including in his victory of the 2012 Tour de France.
In the 2010
Giro d'Italia, and David Millar used them in his 2011 victory in the final TT of the 2011 Giro. Several Pro-Tour teams were using Osymetric and Q-Rings elliptical chainrings for road racing and time trialing. In the 2013 Tour,
Chris Froome
Christopher Clive Froome ɹɪs fɹuːm (born 20 May 1985) is a Kenyan/British road racing cyclist who currently rides for UCI WorldTeam . He has won seven Grand Tours: four editions of the Tour de France (in 2013, 2015, 2016 and 2017), one ...
drew attention with his oval chainring, manufactured by Osymetric.
Compact crankset
In the context of
mountain biking the term compact crankset, or
micro drive
Micro drive is a type of bicycle drivetrain, mostly BMX and MTB, that uses smaller than standard-sized sprockets. The smallest rear sprocket that fits on a freehub body is an 10-tooth, but with the use of a cassette hub, sometimes called a m ...
, refers to smaller triple cranksets, giving a small benefit in weight at the expense of increased wear and also giving the bike better clearance over obstacles. Typical ratios would be 22/32/44 teeth as opposed to 28/38/48 or 24/36/46 teeth. These would be used with smaller cassettes (Generally cassettes are available with 11 tooth minimum gear sizes for compact chainsets while standard chainsets were designed for cassettes with a 13 or 14 tooth top gear), giving the same overall ratio. Compact chainrings have been the dominant standard for mountain bike cranks since the mid nineties.
In the context of
road cycling
Road cycling is the most widespread form of cycling in which cyclists ride on paved roadways. It includes recreational, racing, commuting, and utility cycling. As users of the road, road cyclists are generally expected to obey the same laws as ...
, compact drivetrain typically refers to double cranksets with a smaller (usually ) bolt circle diameter than the standard or Campagnolo's . As of 2006, all of the major component manufacturers such as
Shimano
, originally and later , is a Japanese multinational manufacturing company for cycling components, fishing tackles and rowing equipment, who also produced golf supplies until 2005 and snowboarding gear until 2008. Named after founder Shozabu ...
and
Campagnolo offer compact cranks in their midrange and high-end product lines. The compact crankset provides a compromise between the standard road double crankset (with 39/52 or 39/53 tooth chainrings) and the road triple (with 30/42/52 or 30/39/53 tooth chainrings). The compact crankset has two chainrings and typical ratios are 34/48, 34/50 and 36/50. This provides nearly the same lower gear ratios as a triple but without the need for a third chainring, a triple front derailleur and a long cage rear derailleur. Both Shimano and Campagnolo recommend and sell front derailleurs specifically designed for compact cranksets, claiming better shifting.
Compact gearing is not necessarily lower than standard gearing if cassettes with smaller sprockets (such as 11–23) are used. A high gear of 50×11 on a compact drivechain is actually slightly higher than the 53×12 of a standard set.
Compact gearing usually has a large percentage jump between the two chainrings. In balance, it may also allow small jumps in the rear by allowing a closer ratio cassette to be used, except for the 9% jump at the high end between the 11 and 12 tooth sprockets.
Bent crankarms
Marketed and known by a variety of names (Z-cranks, P.M.P cranks, etc.) non-straight crank arms have been introduced several times. However, "as long as the distance from crank axle to pedal is fixed, there is no pedaling advantage in using bent crank arms". Possible disadvantages from comparable straight crank arms include more weight and more flex.
Rotor Box System
![Rotorbox](https://upload.wikimedia.org/wikipedia/commons/9/92/Rotorbox.jpg)
Rotor is a trade name of a type of crank used in the transmission system of a bicycle.
The Rotor crank was developed by Aeronautic Engineering School students in Madrid, Spain in 1995 and was later commercialised. While Rotor Box found success with recreational road and mountain cyclists, many competitive cyclists continue to use the traditional fixed system as offered by major manufacturers
Campagnolo and
Shimano
, originally and later , is a Japanese multinational manufacturing company for cycling components, fishing tackles and rowing equipment, who also produced golf supplies until 2005 and snowboarding gear until 2008. Named after founder Shozabu ...
, amongst others. One major factor is weight— the Rotor Box System is 50%–75% heavier than most competitive cranks. Other negative factors include higher purchase cost than other fine cranksets, and increased maintenance due to the complexity of the system. These cranksets are no longer in production, and availability of some parts is problematic. However the bearings are standard parts. A few parts, like links, are still distributed.
This system originated as a cog-driven internal mechanism inside a purpose built bicycle's bottom bracket. In this first "ROTOR Box" design, the drive-side crank had an offset chainring spider with round rings. The drive side crank's gear ratio varied during the pedalling cycle by moving the round chainring upward and downward in regards to the crank's axle. The non-drive side crank was accelerated and decelerated by a gearing mechanism inside the bottom bracket to mimic the gear ratio variation the drive side crank went through, at an exact 180 degree phase-offset. While highly effective mechanically, these bicycles were costly and the significant movement of the chainring made shifting quality problematic.
![RS4X crankset](https://upload.wikimedia.org/wikipedia/commons/c/c5/RS4X_crankset.jpg)
![Rotor crankset with Q-rings](https://upload.wikimedia.org/wikipedia/commons/8/83/Rotor_crankset_with_Q-rings.jpg)
Later generation ROTOR System cranks moved the mechanism into an orbital chainring spider with a fixed rotational axis. These "ROTOR System" cranksets fit into classic BSA and ITA bicycle frames. Unlike a standard pair of cranks that always remain at 180 degrees relative to each other, the ROTOR system varies this angle through the circle of motion. The left and right crank arms speed up and slow down independently, relative to the chainrings during the pedalling cycle. The mechanism causing this is designed by ofsetting the axis of rotation of the crank spindle and spider, then connecting the spider to the individual crank arms via two independent links.
As the crank rotates, the distance between the axle and spider varies. By placing a pivot point on the crank arm and the spider and connecting these via linkages, the varying axle to spider distance pivots the linkages up and down, pushing the cranks forward and pulling them backward relative to the chainrings during the rotation. This increases and decreases the effective gear the cyclists' two legs push as the crankset rotates. The effect of these movements eliminates the dead spot (where little power is produced) at the top and bottom of the pedaling cycle, and reduces knee strain. The manufacturer claims that power output relative to heart rate is increased, amongst other claimed benefits.
It takes a couple of weeks of regular use to become accustomed to the unusual feel of the Rotor linkage cranksets. After becoming accustomed to it, most riders prefer it. However, there is no difficulty in switching between ordinary cranksets and Rotor linkage cranksets. Once a rider has learned to use Rotor linkage cranksets the adaption when switching back and forth between crankset types only takes a minute or two.
Many competitive cyclists, including the
Cervélo TestTeam
Cervélo TestTeam () is a former professional cycling team, whose license was held in Switzerland by the cycling management company Cycling United Racing. The team's title sponsor was Cervélo, a Canadian manufacturer of bicycle frames that pr ...
, use Rotor's Q-rings
which mimic the fluctuation in gear size without the added weight.
However Rotor Q-rings and other non-round rings cannot duplicate the crank arm movements that allow application of power through the dead spots of the pedaling cycle. Non-round rings also increase the difficulty of setting up the front derailleur, while Rotor linkage cranksets present no extra difficulty in that regard.
Planetary-drive
A
planetary-gear crankset offers two different gear ratios with just one chainring. This can have at least two advantages: shifting while not pedaling and fewer chances for the chain to come off the chainring. The
Mountain Drive & Speed-Drive by Schlumpf Innovations and the Hammerschmidt are examples.
See also
*
Bicycle gearing
*
Bicycle pedal
*
Biopace
Biopace is a tradename for a type of ovoid bicycle chain ring manufactured by Shimano from 1983 to 1993
The design was intended to help overcome the "dead zone" where the crank arms are vertical and riders have little mechanical advantage.
Bi ...
*
Bottom bracket
The bottom bracket on a bicycle connects the crankset (chainset) to the bicycle and allows the crankset to rotate freely. It contains a spindle to which the crankset attaches, and the bearings that allow the spindle and crankset to rotate. The ...
*
Gearbox bicycle
A gearbox bicycle is a bicycle that uses a gearbox to convert torque and rotational speed from the power source, usually the rider's legs, to what is desired at the drive wheel. The gearbox is usually incorporated into the frame near the crank, ...
References
*
External links
{{Wiktionary, crankset
Bicycle drivetrains