In
linear algebra, Cramer's rule is an explicit formula for the solution of a
system of linear equations
In mathematics, a system of linear equations (or linear system) is a collection of one or more linear equations involving the same variable (math), variables.
For example,
:\begin
3x+2y-z=1\\
2x-2y+4z=-2\\
-x+\fracy-z=0
\end
is a system of three ...
with as many equations as unknowns, valid whenever the system has a unique solution. It expresses the solution in terms of the
determinants of the (square)
coefficient matrix and of
matrices obtained from it by replacing one column by the column vector of right-sides of the equations. It is named after
Gabriel Cramer (1704–1752), who published the rule for an arbitrary number of unknowns in 1750, although
Colin Maclaurin also published special cases of the rule in 1748 (and possibly knew of it as early as 1729).
Cramer's rule implemented in a naive way is computationally inefficient for systems of more than two or three equations.
In the case of equations in unknowns, it requires computation of determinants, while
Gaussian elimination
In mathematics, Gaussian elimination, also known as row reduction, is an algorithm for solving systems of linear equations. It consists of a sequence of operations performed on the corresponding matrix of coefficients. This method can also be used ...
produces the result with the same
computational complexity
In computer science, the computational complexity or simply complexity of an algorithm is the amount of resources required to run it. Particular focus is given to computation time (generally measured by the number of needed elementary operations) ...
as the computation of a single determinant.
Cramer's rule can also be
numerically unstable
In the mathematical subfield of numerical analysis, numerical stability is a generally desirable property of numerical algorithms. The precise definition of stability depends on the context. One is numerical linear algebra and the other is algorit ...
even for 2×2 systems.
However, it has recently been shown that Cramer's rule can be implemented with the same complexity as
Gaussian elimination
In mathematics, Gaussian elimination, also known as row reduction, is an algorithm for solving systems of linear equations. It consists of a sequence of operations performed on the corresponding matrix of coefficients. This method can also be used ...
, (consistently requires twice as many arithmetic operations and has the same numerical stability when the same permutation matrices are applied).
General case
Consider a system of linear equations for unknowns, represented in matrix multiplication form as follows:
:
where the matrix has a nonzero determinant, and the vector
is the column vector of the variables. Then the theorem states that in this case the system has a unique solution, whose individual values for the unknowns are given by:
:
where
is the matrix formed by replacing the -th column of by the column vector .
A more general version of Cramer's rule considers the matrix equation
:
where the matrix has a nonzero determinant, and , are matrices. Given sequences
and
, let
be the submatrix of with rows in
and columns in
. Let
be the matrix formed by replacing the
column of by the
column of , for all
. Then
:
In the case
, this reduces to the normal Cramer's rule.
The rule holds for systems of equations with coefficients and unknowns in any
field, not just in the
real numbers.
Proof
The proof for Cramer's rule uses the following
properties of the determinants: linearity with respect to any given column and the fact that the determinant is zero whenever two columns are equal, which is implied by the property that the sign of the determinant flips if you switch two columns.
Fix the index of a column, and consider that the entries of the columns have fixed values. This makes the determinant a function of the entries of the th column. Linearity with respect of this column means that this function has the form
:
where the
are coefficients that depend on the entries of that are not in column . So, one has
:
(
Laplace expansion provides a formula for computing the
but their expression is not important here.)
If the function
is applied to any ''other'' column of , then the result is the determinant of the matrix obtained from by replacing column by a copy of column , so the resulting determinant is 0 (the case of two equal columns).
Now consider a system of linear equations in unknowns
, whose coefficient matrix is , with det(''A'') assumed to be nonzero:
:
If one combines these equations by taking times the first equation, plus times the second, and so forth until times the last, then, for every the coefficient of becomes
:
So, all coefficients become zero, except the coefficient of
that becomes
Similarly, the constant coefficient becomes
and the resulting equation is thus
:
which gives the value of
as
:
As, by construction, the numerator is the determinant of the matrix obtained from by replacing column by , we get the expression of Cramer's rule as a necessary condition for a solution. The same procedure can be repeated for other values of to find values for the other unknowns.
The only point that remains to prove is that these values for the unknowns form a solution. Let be the matrix that has the coefficients of
as th row, for
(this is the
adjugate matrix for ). Expressed in matrix terms, we have thus to prove that
:
is a solution; that is, that
:
For that, it suffices to prove that
:
where
is the
identity matrix
In linear algebra, the identity matrix of size n is the n\times n square matrix with ones on the main diagonal and zeros elsewhere.
Terminology and notation
The identity matrix is often denoted by I_n, or simply by I if the size is immaterial o ...
.
The above properties of the functions
show that one has , and therefore,
:
This completes the proof, since a
left inverse of a square matrix is also a right-inverse (see
Invertible matrix theorem).
For other proofs, see
below
Below may refer to:
*Earth
*Ground (disambiguation)
*Soil
*Floor
*Bottom (disambiguation)
Bottom may refer to:
Anatomy and sex
* Bottom (BDSM), the partner in a BDSM who takes the passive, receiving, or obedient role, to that of the top or ...
.
Finding inverse matrix
Let be an matrix with entries in a
field . Then
:
where denotes the
adjugate matrix, is the determinant, and is the
identity matrix
In linear algebra, the identity matrix of size n is the n\times n square matrix with ones on the main diagonal and zeros elsewhere.
Terminology and notation
The identity matrix is often denoted by I_n, or simply by I if the size is immaterial o ...
. If is nonzero, then the inverse matrix of is
:
This gives a formula for the inverse of , provided . In fact, this formula works whenever is a
commutative ring
In mathematics, a commutative ring is a ring in which the multiplication operation is commutative. The study of commutative rings is called commutative algebra. Complementarily, noncommutative algebra is the study of ring properties that are not sp ...
, provided that is a
unit. If is not a unit, then is not invertible over the ring (it may be invertible over a larger ring in which some non-unit elements of may be invertible).
Applications
Explicit formulas for small systems
Consider the linear system
:
which in matrix format is
:
Assume nonzero. Then, with help of
determinants, and can be found with Cramer's rule as
:
The rules for matrices are similar. Given
:
which in matrix format is
:
Then the values of and can be found as follows:
:
Differential geometry
Ricci calculus
Cramer's rule is used in the
Ricci calculus
In mathematics, Ricci calculus constitutes the rules of index notation and manipulation for tensors and tensor fields on a differentiable manifold, with or without a metric tensor or connection. It is also the modern name for what used to be cal ...
in various calculations involving the
Christoffel symbols of the first and second kind.
In particular, Cramer's rule can be used to prove that the divergence operator on a Riemannian manifold is invariant with respect to change of coordinates. We give a direct proof, suppressing the role of the Christoffel symbols.
Let
be a
Riemannian manifold
In differential geometry, a Riemannian manifold or Riemannian space , so called after the German mathematician Bernhard Riemann, is a real manifold, real, smooth manifold ''M'' equipped with a positive-definite Inner product space, inner product ...
equipped with
local coordinates . Let
be a
vector field. We use the
summation convention throughout.
:Theorem.
:''The ''divergence'' of
,''
::
:''is invariant under change of coordinates.''
Let
be a
coordinate transformation with
non-singular Jacobian
In mathematics, a Jacobian, named for Carl Gustav Jacob Jacobi, may refer to:
*Jacobian matrix and determinant
*Jacobian elliptic functions
*Jacobian variety
*Intermediate Jacobian
In mathematics, the intermediate Jacobian of a compact Kähler m ...
. Then the classical
transformation laws imply that
where
. Similarly, if
, then
.
Writing this transformation law in terms of matrices yields
, which implies
.
Now one computes
:
In order to show that this equals
,
it is necessary and sufficient to show that
:
which is equivalent to
:
Carrying out the differentiation on the left-hand side, we get:
:
where
denotes the matrix obtained from
by deleting the
th row and
th column.
But Cramer's Rule says that
:
is the
th entry of the matrix
.
Thus
:
completing the proof.
Computing derivatives implicitly
Consider the two equations
and
. When ''u'' and ''v'' are independent variables, we can define
and
An equation for
can be found by applying Cramer's rule.
First, calculate the first derivatives of ''F'', ''G'', ''x'', and ''y'':
:
Substituting ''dx'', ''dy'' into ''dF'' and ''dG'', we have:
:
Since ''u'', ''v'' are both independent, the coefficients of ''du'', ''dv'' must be zero. So we can write out equations for the coefficients:
:
Now, by Cramer's rule, we see that:
:
This is now a formula in terms of two
Jacobian
In mathematics, a Jacobian, named for Carl Gustav Jacob Jacobi, may refer to:
*Jacobian matrix and determinant
*Jacobian elliptic functions
*Jacobian variety
*Intermediate Jacobian
In mathematics, the intermediate Jacobian of a compact Kähler m ...
s:
:
Similar formulas can be derived for
Integer programming
Cramer's rule can be used to prove that an
integer programming problem whose constraint matrix is
totally unimodular and whose right-hand side is integer, has integer basic solutions. This makes the integer program substantially easier to solve.
Ordinary differential equations
Cramer's rule is used to derive the general solution to an inhomogeneous linear differential equation by the method of
variation of parameters.
Geometric interpretation

Cramer's rule has a geometric interpretation that can be considered also a proof or simply giving insight about its geometric nature. These geometric arguments work in general and not only in the case of two equations with two unknowns presented here.
Given the system of equations
:
it can be considered as an equation between vectors
:
The area of the parallelogram determined by
and
is given by the determinant of the system of equations:
:
In general, when there are more variables and equations, the determinant of vectors of length will give the ''volume'' of the ''
parallelepiped
In geometry, a parallelepiped is a three-dimensional figure formed by six parallelograms (the term ''rhomboid'' is also sometimes used with this meaning). By analogy, it relates to a parallelogram just as a cube relates to a square. In Euclidea ...
'' determined by those vectors in the -th dimensional
Euclidean space.
Therefore, the area of the parallelogram determined by
and
has to be
times the area of the first one since one of the sides has been multiplied by this factor. Now, this last parallelogram, by
Cavalieri's principle
In geometry, Cavalieri's principle, a modern implementation of the method of indivisibles, named after Bonaventura Cavalieri, is as follows:
* 2-dimensional case: Suppose two regions in a plane are included between two parallel lines in that pl ...
, has the same area as the parallelogram determined by
and
Equating the areas of this last and the second parallelogram gives the equation
:
from which Cramer's rule follows.
Other proofs
A proof by abstract linear algebra
This is a restatement of the proof above in abstract language.
Consider the map
where
is the matrix
with
substituted in the
th column, as in Cramer's rule. Because of linearity of determinant in every column, this map is linear. Observe that it sends the
th column of
to the
th basis vector
(with 1 in the
th place), because determinant of a matrix with a repeated column is 0. So we have a linear map which agrees with the inverse of
on the column space; hence it agrees with
on the span of the column space. Since
is invertible, the column vectors span all of
, so our map really is the inverse of
. Cramer's rule follows.
A short proof
A short proof of Cramer's rule
can be given by noticing that
is the determinant of the matrix
:
On the other hand, assuming that our original matrix is invertible, this matrix
has columns
, where
is the ''n''-th column of the matrix . Recall that the matrix
has columns
, and therefore
. Hence, by using that the determinant of the product of two matrices is the product of the determinants, we have
:
The proof for other
is similar.
Incompatible and indeterminate cases
A system of equations is said to be incompatible or
inconsistent
In classical deductive logic, a consistent theory is one that does not lead to a logical contradiction. The lack of contradiction can be defined in either semantic or syntactic terms. The semantic definition states that a theory is consistent i ...
when there are no solutions and it is called
indeterminate
Indeterminate may refer to:
In mathematics
* Indeterminate (variable), a symbol that is treated as a variable
* Indeterminate system, a system of simultaneous equations that has more than one solution
* Indeterminate equation, an equation that ha ...
when there is more than one solution. For linear equations, an indeterminate system will have infinitely many solutions (if it is over an infinite field), since the solutions can be expressed in terms of one or more parameters that can take arbitrary values.
Cramer's rule applies to the case where the coefficient determinant is nonzero. In the 2×2 case, if the coefficient determinant is zero, then the system is incompatible if the numerator determinants are nonzero, or indeterminate if the numerator determinants are zero.
For 3×3 or higher systems, the only thing one can say when the coefficient determinant equals zero is that if any of the numerator determinants are nonzero, then the system must be incompatible. However, having all determinants zero does not imply that the system is indeterminate. A simple example where all determinants vanish (equal zero) but the system is still incompatible is the 3×3 system ''x''+''y''+''z''=1, ''x''+''y''+''z''=2, ''x''+''y''+''z''=3.
See also
*
Rouché–Capelli theorem
In linear algebra, the Rouché–Capelli theorem determines the number of solutions for a system of linear equations, given the rank of its augmented matrix and coefficient matrix. The theorem is variously known as the:
* Rouché–Capelli theorem ...
*
Gaussian elimination
In mathematics, Gaussian elimination, also known as row reduction, is an algorithm for solving systems of linear equations. It consists of a sequence of operations performed on the corresponding matrix of coefficients. This method can also be used ...
References
External links
Proof of Cramer's RuleWebApp descriptively solving systems of linear equations with Cramer's RuleOnline Calculator of System of linear equations
{{DEFAULTSORT:Cramer's Rule
Theorems in linear algebra
Determinants
1750 in science