The control booth, control room, lighting box, technical booth, tech booth, or just booth used by television, film or
theatrical technician
A theatrical technician (also known as a tech, technician, theatre tech, theatre technician, or techie) is a person who operates technical equipment and systems in the performing arts and entertainment industry. In contrast to performers, this ...
s is the area designated for the operation of technical equipment (
lighting
Lighting or illumination is the deliberate use of light to achieve practical or aesthetic effects. Lighting includes the use of both artificial light sources like lamps and light fixtures, as well as natural illumination by capturing daylig ...
and
sound
In physics, sound is a vibration that propagates as an acoustic wave, through a transmission medium such as a gas, liquid or solid.
In human physiology and psychology, sound is the ''reception'' of such waves and their ''perception'' b ...
),
lighting controls and
sound board. Often one or two
followspot
{{Unreferenced, date=October 2007
A spotlight (or followspot) is a powerful stage lighting instrument which projects a bright beam of light onto a performance space. Spotlights are controlled by a spotlight operator who tracks actors around the ...
s may be located in the booth as well. In a theater, it is generally an enclosed space with a large sliding window with a good view of the stage centered in the back of the
house. It may be on the ground floor or at the balcony level. In a film or television production, it might be in a trailer or other space near the studio.
It is designed to allow lighting and sound operators to be able to see the performance, without being in the auditorium itself. This means that they are free to talk to their colleagues in the booth, and also the
stage management team and other crew members via the communications
headset. A booth that is sealed to the auditorium also allows for noisier equipment to be used, in particular computers and computer-based
lighting desks, which require built-in fans in order to work properly. The downside to having a sealed booth is that it can be difficult for the sound engineer to mix without being able to hear what is happening on stage. In this situation a separate table may be set up in the house for the sound engineer.
In some smaller theatres and school halls, control booths can sometimes be found above or at the side of the stage. This allows space at the back of the auditorium for more seating, or a larger foyer area. In older theatres, this is because before the advent of thyristor dimming and compact electronic control desks, there was a limit on the distance that lighting controls could be placed away from the dimmers.
In some theatres, the control booth is divided into a suite of rooms, allowing each of the technical elements of a production its own customized space. This is especially likely to be the case where a theatre produces performances which require
live sound mixing
Live sound mixing is the blending of multiple sound sources by an audio engineer using a mixing console or software. Sounds that are mixed include those from instruments and voices which are picked up by microphones (for drum kit, lead vocals an ...
rather than just pre-recorded effects, as a sound operator needs to be able to hear the sound in the auditorium, and so not be sealed from it as a lighting operator, followspot operator or projectionist might be. In some theatres with one or more balconies, the followspots may be given their own room above the highest balcony, with the lighting booth typically lower down at the rear of the stalls or the first balcony.
In rare cases, such as low-budget theatres or ones at small or older schools, the control booth is not enclosed as its own space; rather, it is part of the seating house. This setup is almost never used because it hinders the possibility of the technician team to effectively communicate to the backstage area without disrupting the performance.
Contents
The booth contains a variety of equipment used in the production of theatrical performances. Although booths vary greatly from venue to venue, most booths contain a
light board
A lighting control console (also called a lightboard, lighting board, or lighting desk) is an electronic device used in theatrical lighting design to control multiple stage lights at once. They are used throughout the entertainment industry and a ...
, and sometimes a
sound board. Most control booths have at least one intercom headset used for communication with the backstage crew during performances. The booth may have equipment racks for the lighting and audio equipment.
See also
Parts of a theater There are different types of theatres, but they all have three major parts in common. Theatres are divided into two main sections, the house and the stage; there is also a backstage area in many theatres. The house is the seating area for guests wat ...
References
{{DEFAULTSORT:Control Booth (Theater)
Parts of a theatre
Stagecraft
Stage lighting