In
mathematics
Mathematics is a field of study that discovers and organizes methods, Mathematical theory, theories and theorems that are developed and Mathematical proof, proved for the needs of empirical sciences and mathematics itself. There are many ar ...
, a conservative system is a
dynamical system
In mathematics, a dynamical system is a system in which a Function (mathematics), function describes the time dependence of a Point (geometry), point in an ambient space, such as in a parametric curve. Examples include the mathematical models ...
which stands in contrast to a
dissipative system
A dissipative system is a thermodynamically open system which is operating out of, and often far from, thermodynamic equilibrium in an environment with which it exchanges energy and matter. A tornado may be thought of as a dissipative system. Di ...
. Roughly speaking, such systems have no
friction
Friction is the force resisting the relative motion of solid surfaces, fluid layers, and material elements sliding against each other. Types of friction include dry, fluid, lubricated, skin, and internal -- an incomplete list. The study of t ...
or other mechanism to dissipate the dynamics, and thus, their
phase space
The phase space of a physical system is the set of all possible physical states of the system when described by a given parameterization. Each possible state corresponds uniquely to a point in the phase space. For mechanical systems, the p ...
does not shrink over time. Precisely speaking, they are those dynamical systems that have a null
wandering set: under time evolution, no portion of the phase space ever "wanders away", never to be returned to or revisited. Alternately, conservative systems are those to which the
Poincaré recurrence theorem applies. An important special case of conservative systems are the
measure-preserving dynamical systems.
Informal introduction
Informally, dynamical systems describe the time evolution of the
phase space
The phase space of a physical system is the set of all possible physical states of the system when described by a given parameterization. Each possible state corresponds uniquely to a point in the phase space. For mechanical systems, the p ...
of some mechanical system. Commonly, such evolution is given by some differential equations, or quite often in terms of discrete time steps. However, in the present case, instead of focusing on the time evolution of discrete points, one shifts attention to the time evolution of collections of points. One such example would be
Saturn's rings
Saturn has the most extensive and complex ring system of any planet in the Solar System. The rings consist of particles in orbit around the planet made almost entirely of water ice, with a trace component of rocky material. Particles range fro ...
: rather than tracking the time evolution of individual grains of sand in the rings, one is instead interested in the time evolution of the density of the rings: how the density thins out, spreads, or becomes concentrated. Over short time-scales (hundreds of thousands of years), Saturn's rings are stable, and are thus a reasonable example of a conservative system and more precisely, a measure-preserving dynamical system. It is measure-preserving, as the number of particles in the rings does not change, and, per Newtonian orbital mechanics, the phase space is incompressible: it can be stretched or squeezed, but not shrunk (this is the content of
Liouville's theorem).
Formal definition
Formally, a measurable dynamical system is conservative if and only if it is non-singular, and has no wandering sets.
A measurable
dynamical system
In mathematics, a dynamical system is a system in which a Function (mathematics), function describes the time dependence of a Point (geometry), point in an ambient space, such as in a parametric curve. Examples include the mathematical models ...
(''X'', Σ, ''μ'', ''τ'') is a
Borel space (''X'', Σ) equipped with a
sigma-finite measure ''μ'' and a transformation ''τ''. Here, ''X'' is a
set
Set, The Set, SET or SETS may refer to:
Science, technology, and mathematics Mathematics
*Set (mathematics), a collection of elements
*Category of sets, the category whose objects and morphisms are sets and total functions, respectively
Electro ...
, and Σ is a
sigma-algebra on ''X'', so that the pair (''X'', Σ) is a
measurable space
In mathematics, a measurable space or Borel space is a basic object in measure theory. It consists of a set and a σ-algebra, which defines the subsets that will be measured.
It captures and generalises intuitive notions such as length, area, an ...
. ''μ'' is a sigma-finite
measure on the sigma-algebra. The space ''X'' is the
phase space
The phase space of a physical system is the set of all possible physical states of the system when described by a given parameterization. Each possible state corresponds uniquely to a point in the phase space. For mechanical systems, the p ...
of the dynamical system.
A transformation (a map)
is said to be
Σ-measurable if and only if, for every ''σ'' ∈ Σ, one has
. The transformation is a single "time-step" in the evolution of the dynamical system. One is interested in invertible transformations, so that the current state of the dynamical system came from a well-defined past state.
A measurable transformation
is called non-singular when
if and only if
. In this case, the system (''X'', Σ, ''μ'', ''τ'') is called a non-singular dynamical system. The condition of being non-singular is necessary for a dynamical system to be suitable for modeling (non-equilibrium) systems. That is, if a certain configuration of the system is "impossible" (i.e.
) then it must stay "impossible" (was always impossible:
), but otherwise, the system can evolve arbitrarily. Non-singular systems preserve the negligible sets, but are not required to preserve any other class of sets. The sense of the word ''singular'' here is the same as in the definition of a
singular measure In mathematics, two positive (or signed or complex) measures \mu and \nu defined on a measurable space (\Omega, \Sigma) are called singular if there exist two disjoint measurable sets A, B \in \Sigma whose union is \Omega such that \mu is zero o ...
in that no portion of
is singular with respect to
and vice versa.
A non-singular dynamical system for which
is called invariant, or, more commonly, a
measure-preserving dynamical system.
A non-singular dynamical system is conservative if, for every set
of positive measure and for every
, one has some integer
such that
. Informally, this can be interpreted as saying that the current state of the system revisits or comes arbitrarily close to a prior state; see
Poincaré recurrence for more.
A non-singular transformation
is incompressible if, whenever one has
, then
.
Properties
For a non-singular transformation
, the following statements are equivalent:
* ''τ'' is conservative.
* ''τ'' is incompressible.
* Every
wandering set of ''τ'' is null.
* For all sets ''σ'' of positive measure,
.
The above implies that, if
and
is measure-preserving, then the dynamical system is conservative. This is effectively the modern statement of the
Poincaré recurrence theorem. A sketch of a proof of the equivalence of these four properties is given in the article on the
Hopf decomposition.
Suppose that
and
is measure-preserving. Let
be a wandering set of
. By definition of wandering sets and since
preserves
,
would thus contain a countably infinite union of pairwise disjoint sets that have the same
-measure as
. Since it was assumed
, it follows that
is a null set, and so all wandering sets must be null sets.
This argumentation fails for even the simplest examples if
. Indeed, consider for instance
, where
denotes the
Lebesgue measure
In measure theory, a branch of mathematics, the Lebesgue measure, named after French mathematician Henri Lebesgue, is the standard way of assigning a measure to subsets of higher dimensional Euclidean '-spaces. For lower dimensions or , it c ...
, and consider the shift operator
. Since the Lebesgue measure is translation-invariant,
is measure-preserving. However,
is not conservative. In fact, every interval of length strictly less than
contained in
is wandering. In particular,
can be written as a countable union of wandering sets.
Hopf decomposition
The
Hopf decomposition states that every measure space with a non-singular transformation can be decomposed into an invariant conservative set and a wandering (dissipative) set. A commonplace informal example of Hopf decomposition is the
mixing of two liquids (some textbooks mention rum and coke): The initial state, where the two liquids are not yet mixed, can never recur again after mixing; it is part of the dissipative set. Likewise any of the partially-mixed states. The result, after mixing (a
cuba libre, in the canonical example), is stable, and forms the conservative set; further mixing does not alter it. In this example, the conservative set is also ergodic: if one added one more drop of liquid (say, lemon juice), it would not stay in one place, but would come to mix in everywhere. One word of caution about this example: although mixing systems are ergodic,
ergodic systems are ''not'' in general mixing systems! Mixing implies an interaction which may not exist. The canonical example of an ergodic system that does not mix is irrational circle rotation.
Ergodic decomposition
The
ergodic decomposition theorem states, roughly, that every conservative system can be split up into components, each component of which is individually
ergodic. An informal example of this would be a tub, with a divider down the middle, with liquids filling each compartment. The liquid on one side can clearly mix with itself, and so can the other, but, due to the partition, the two sides cannot interact. Clearly, this can be treated as two independent systems; leakage between the two sides, of measure zero, can be ignored. The ergodic decomposition theorem states that all conservative systems can be split into such independent parts, and that this splitting is unique (up to differences of measure zero). Thus, by convention, the study of conservative systems becomes the study of their ergodic components.
Formally, every
ergodic system is conservative. Recall that an invariant set σ ∈ Σ is one for which ''τ''(''σ'') = ''σ''. For an ergodic system, the only invariant sets are those with measure zero or with full measure (are
null
Null may refer to:
Science, technology, and mathematics Astronomy
*Nuller, an optical tool using interferometry to block certain sources of light Computing
*Null (SQL) (or NULL), a special marker and keyword in SQL indicating that a data value do ...
or are
conull); that they are conservative then follows trivially from this.
When ''τ'' is ergodic, the following statements are equivalent:
* ''τ'' is conservative and ergodic
* For all measurable sets ''σ'',
; that is, ''σ'' "sweeps out" all of ''X''.
* For all sets ''σ'' of positive measure, and for
almost every , there exists a positive integer ''n'' such that
.
* For all sets
and
of positive measure, there exists a positive integer ''n'' such that
* If
, then either
or the complement has zero measure:
.
See also
*
KMS state
In the statistical mechanics of quantum mechanics, quantum mechanical systems and quantum field theory, the properties of a system in thermal equilibrium can be described by a mathematical object called a Kubo–Martin–Schwinger (KMS) state: a ...
, a description of thermodynamic equilibrium in quantum mechanical systems; dual to modular theories for von Neumann algebras.
Notes
References
*
*
*
Further reading
*
*
{{Dynamical systems, state=expanded
Ergodic theory
Dynamical systems