Common Hybrid Interface Protocol System
   HOME

TheInfoList



OR:

Common Hybrid Interface Protocol System (CHIPS) is the definition of a computer network that consists of a mixture of common serial data protocols such as
RS-232 In telecommunications, RS-232 or Recommended Standard 232 is a standard originally introduced in 1960 for serial communication transmission of data. It formally defines signals connecting between a ''DTE'' (''data terminal equipment'') such ...
and
RS-485 RS-485, also known as TIA-485(-A) or EIA-485, is a standard defining the electrical characteristics of drivers and receivers for use in serial communications systems. Electrical signaling is balanced, and multipoint systems are supported. The s ...
, or can be even PC keyboard interface communication. CHIPS may also consist of
Bluetooth Bluetooth is a short-range wireless technology standard that is used for exchanging data between fixed and mobile devices over short distances and building personal area networks (PANs). In the most widely used mode, transmission power is limi ...
and
Wi-Fi Wi-Fi () is a family of wireless network protocols, based on the IEEE 802.11 family of standards, which are commonly used for local area networking of devices and Internet access, allowing nearby digital devices to exchange data by radio wav ...
for wireless communication can be installed on all major hardware platforms. There are several CHIPS projects and products available today where such systems are i.e. MISOLIMA DOLLx8 and
Olivetti Olivetti S.p.A. is an Italian manufacturer of computers, tablets, smartphones, printers and other such business products as calculators and fax machines. Headquartered in Ivrea, in the Metropolitan City of Turin, the company has been par ...
's "Mael Gateasy".Olivetti Mael Gateasy
/ref> As new bus systems are gaining market shares, there will always be needs for CHIPS to enable serial network protocols to be integrated into one single connection point. By using CHIPS, it will be possible to control I/O data from different sources and systems without having the need to install several serial interface cards and drivers. CHIPS users will, in most cases, be able to work with several serial data
transceiver In radio communication, a transceiver is an electronic device which is a combination of a radio ''trans''mitter and a re''ceiver'', hence the name. It can both transmit and receive radio waves using an antenna, for communication purposes. Thes ...
sources at the same time. Such serial data might originate from PC Keyboards,
CANbus A Controller Area Network (CAN bus) is a robust vehicle bus standard designed to allow microcontrollers and devices to communicate with each other's applications without a host computer. It is a message-based protocol, designed originally for m ...
, RS and wireless communication where all data connects into one or several CHIPS units that communicate over the mixed serial data protocols. Due to some mixed baud rates between the connected systems, the compatibility with CHIPS means that some devices will have reduced transfer rates, but CHIPS are primary designed for Lab-, office-, home-, factory- and building automation also used in Internet of Things.


References

{{Reflist Network architecture