Climbing Centre
   HOME

TheInfoList



OR:

A climbing gym is a gym dedicated to
indoor climbing A climbing wall is an artificially constructed wall with grips for hands and feet, usually used for indoor climbing, but sometimes located outdoors. Some are brick or wooden constructions, but on most modern walls, the material most often used i ...
. Climbing gyms have climbing walls that can be used for
leading In typography, leading ( ) is the space between adjacent lines of type; the exact definition varies. In hand typesetting, leading is the thin strips of lead (or aluminium) that were inserted between lines of type in the composing stick to incre ...
, top roping, and bouldering. They sometimes offer training equipment to improve technique, strength, and endurance.


Contents of a climbing gym

Different kinds of climbing gym focus on different types of climbing, and their layout and equipment will change accordingly. The size and funding of a gym and the style of climbing it focuses on can change the equipment it contains.


Climbing walls

A climbing wall is an artificial wall designed for climbing. Gyms dedicated to bouldering tend to have short routes without bolts, usually no more than 6 metres tall. Other gyms including or focused on
sport climbing Sport climbing (or Bolted climbing) is a form of rock climbing that relies on permanent anchors (or bolts), permanently fixed into the rock for climber protection, in which a rope that is attached to the climber is clipped into the anchors to ...
will include taller walls with bolts and quickdraws. Some climbing gyms may also include auto belays, which are motors designed to allow someone to climb without the assistance of a
belayer Belaying is a variety of techniques climbers use to create friction within a climbing system, particularly on a climbing rope, so that a falling climber does not fall very far. A climbing partner typically applies tension at the other end of th ...
. Some gyms may have a wall dedicated to speed climbing, in which case an auto belay will be used. A climbing gym will often have walls of several different styles, including slab walls, overhangs, and vertical walls. Some climbing gyms include programmable climbing walls such as a moon board which allow users to set climbs using a fixed set of holds and upload them for other users to try. When a climber selects a climb to try, the relevant holds are lit up by LEDs.


Problems and climbs

Most climbs in a climbing gym (known as "problems" in bouldering) will have an approximate
climbing grade In rock climbing, mountaineering, and other climbing disciplines, climbers give a grade to a climbing route or boulder problem, intended to describe concisely the difficulty and danger of climbing it. Different types of climbing (such as spo ...
and a way of identifying the
holds A hold (abbreviated HLD, H or HD) is awarded to a relief pitcher who meets the following three conditions: :1. Enters the game in a save (baseball), save situation; that is, when all of the following three conditions apply: :: (a) He appears i ...
to be used. In some gyms, holds are identified by coloured
tape Tape or Tapes may refer to: Material A long, narrow, thin strip of material (see also Ribbon (disambiguation): Adhesive tapes * Adhesive tape, any of many varieties of backing materials coated with an adhesive *Athletic tape, pressure-sensitiv ...
placed next to each hold, but it is becoming more common for the holds of a given climb to all be the same or similar colour for easy identification. Climbs will usually have some method of identifying the "starting holds" (the holds you use to start the climb) such as tags or tape next to each starting hold. Although the practice is not universal, many gyms use a circuit system wherein climbs of a similar grade in a gym will be the same colour, will be reset at the same time, and sometimes will be set in a particular style.


Training section

Many climbing gyms will contain an area dedicated to training. This can include general physical fitness equipment, such as a bench, weights, or a Pullup bar, but can often include climbing-specific training equipment such as a campus board or hangboards. Climbing gyms often have equipment related to calisthenics and bodyweight training, including Resistance bands, dip belts, and rings.


Climbing equipment

Climbing gyms have a lot of equipment dedicated to climbing. Most gyms, regardless of the type of climbing they are designed for, will offer climbing shoes for rent. Climbing gyms which offer sport climbing will also offer
harnesses A harness is a looped restraint or support. Specifically, it may refer to one of the following harness types: * Bondage harness * Child harness * Climbing harness * Dog harness * Pet harness * Five-point harness * Horse harness * Parrot harness * ...
, ropes, and
belay devices A belay device is a mechanical piece of climbing equipment used to control a rope during belaying. It is designed to improve belay safety for the climber by allowing the belayer to manage their duties with minimal physical effort. With the right ...
. Some climbers may bring other equipment, such as chalk bags or liquid chalk. Most climbing gyms offer rent of necessary equipment, and some have shops which allow the purchase of equipment. Other equipment which may be on offer includes finger tape or helmets.


Safety

Climbing is a dangerous sport which can cause many injuries. To mitigate this, climbing gyms have equipment and precautions in place to ensure safety.


Policies

Safety policies are the practices and rules enforced by a climbing gym to ensure the safety of its climbers. This may include supervision, ensuring that unsupervised climbers have enough experience to keep themselves safe, or rules to dissuade dangerous behavior, such as walking under climbers or jumping from high bouldering walls. Climbing gyms often have lessons for people to learn climbing safety and technique.


Equipment

Climbing gyms have equipment designed to keep people safe. This includes harnesses to avoid dangerous falls, padded floors around bouldering walls to soften landings, and extra holds designed to help people to climb down from the top of difficult climbs.


History

The first climbing holds and walls were designed for climbers to keep training during the winter. Early walls and holds evolved in the late 1970s and early 1980s from wood strips screwed to garage walls, glued rocks, and other improvisations. The first 'modern' molded plastic holds with a bolt in the middle were created by French climber François Savigny in 1983, sparking a nascent industry. The first facility that would be recognized as a climbing gym today was established in
Seattle Seattle ( ) is a seaport city on the West Coast of the United States. It is the seat of King County, Washington. With a 2020 population of 737,015, it is the largest city in both the state of Washington and the Pacific Northwest regio ...
, Washington by climbers Rich Johnston and Dan Cauthorn in January 1987. The gym, called Vertical Club, was created with a $14,000 budget with the aid of the local community, by gluing rocks onto the walls.


Notes


References

{{reflist Indoor climbing Exercise equipment Sport climbing