![GRES-2 wide](https://upload.wikimedia.org/wikipedia/commons/b/bf/GRES-2_wide.jpg)
A chimney is an
architectural ventilation structure made of masonry, clay or metal that isolates hot toxic
exhaust gases or
smoke produced by a
boiler
A boiler is a closed vessel in which fluid (generally water) is heated. The fluid does not necessarily boil. The heated or vaporized fluid exits the boiler for use in various processes or heating applications, including water heating, central h ...
,
stove,
furnace
A furnace is a structure in which heat is produced with the help of combustion.
Furnace may also refer to:
Appliances Buildings
* Furnace (central heating): a furnace , or a heater or boiler , used to generate heat for buildings
* Boiler, used t ...
,
incinerator
Incineration is a waste treatment process that involves the combustion of substances contained in waste materials. Industrial plants for waste incineration are commonly referred to as waste-to-energy facilities. Incineration and other high ...
, or
fireplace
A fireplace or hearth is a structure made of brick, stone or metal designed to contain a fire. Fireplaces are used for the relaxing ambiance they create and for heating a room. Modern fireplaces vary in heat efficiency, depending on the design.
...
from human living areas. Chimneys are typically vertical, or as near as possible to vertical, to ensure that the gases flow smoothly, drawing air into the
combustion
Combustion, or burning, is a high-temperature exothermic redox chemical reaction between a fuel (the reductant) and an oxidant, usually atmospheric oxygen, that produces oxidized, often gaseous products, in a mixture termed as smoke. Combusti ...
in what is known as the
stack, or chimney effect. The space inside a chimney is called the ''
flue''. Chimneys are adjacent to large industrial
refineries
A refinery is a production facility composed of a group of chemical engineering unit processes and unit operations refining certain materials or converting raw material into products of value.
Types of refineries
Different types of refineries ar ...
, fossil fuel combustion facilities or part of buildings, steam locomotives and ships.
In the
United States
The United States of America (U.S.A. or USA), commonly known as the United States (U.S. or US) or America, is a country primarily located in North America. It consists of 50 states, a federal district, five major unincorporated territorie ...
, the term ''
smokestack industry'' refers to the environmental impacts of burning fossil fuels by industrial society, including the electric industry during its earliest history. The term ''smokestack'' (colloquially, ''stack'') is also used when referring to
locomotive chimneys or
ship chimneys, and the term ''funnel'' can also be used.
The height of a chimney influences its ability to transfer flue gases to the external environment via
stack effect
The stack effect or chimney effect is the movement of air into and out of buildings through unsealed openings, chimneys, flue-gas stacks, or other containers, resulting from air buoyancy. Buoyancy occurs due to a difference in indoor-to-outdoor a ...
. Additionally, the dispersion of pollutants at higher altitudes can reduce their impact on the immediate surroundings. The dispersion of pollutants over a greater area can reduce their concentrations and facilitate compliance with regulatory limits.
History
![Seagull sits on top of the chimney cone at The World of Glass](https://upload.wikimedia.org/wikipedia/commons/8/8a/Seagull_sits_on_top_of_the_chimney_cone_at_The_World_of_Glass.jpg)
Industrial chimney use dates to the
Romans, who drew smoke from their bakeries with tubes embedded in the walls. However, domestic chimneys first appeared in large dwellings in northern Europe in the 12th century. The earliest extant example of an English chimney is at the keep of
Conisbrough Castle in
Yorkshire
Yorkshire ( ; abbreviated Yorks), formally known as the County of York, is a Historic counties of England, historic county in northern England and by far the largest in the United Kingdom. Because of its large area in comparison with other Eng ...
, which dates from 1185 AD. However, they did not become common in houses until the 16th and 17th centuries. Smoke hoods were an early method of collecting the smoke into a chimney. These were typically much wider than modern chimneys and started relatively high above the fire, meaning more heat could escape into the room. Because the air going up the shaft was cooler, these could be made of less fireproof materials. Another step in the development of chimneys was the use of built-in ovens which allowed the household to bake at home. Industrial chimneys became common in the late 18th century.
Chimneys in ordinary dwellings were first built of wood and plaster or mud. Since then chimneys have traditionally been built of brick or stone, both in small and large buildings. Early chimneys were of simple brick construction. Later chimneys were constructed by placing the bricks around tile liners. To control downdrafts, venting caps (often called ''chimney pots'') with a variety of designs are sometimes placed on the top of chimneys.
In the 18th and 19th centuries, the methods used to extract
lead
Lead is a chemical element with the symbol Pb (from the Latin ) and atomic number 82. It is a heavy metal that is denser than most common materials. Lead is soft and malleable, and also has a relatively low melting point. When freshly cu ...
from its ore produced large amounts of toxic fumes. In the north of England, long near-horizontal chimneys were built, often more than 3 km (2 mi) long, which typically terminated in a short vertical chimney in a remote location where the fumes would cause less harm. Lead and silver deposits formed on the inside of these long chimneys, and periodically workers would be sent along the chimneys to scrape off these valuable deposits.
Construction
![Seven-flue_Stack_1834](https://upload.wikimedia.org/wikipedia/commons/5/5c/Seven-flue_Stack_1834.png)
As a result of the limited ability to handle transverse loads with brick, chimneys in houses were often built in a "stack", with a fireplace on each floor of the house sharing a single chimney, often with such a stack at the front and back of the house. Today's
central heating
A central heating system provides warmth to a number of spaces within a building from one main source of heat. It is a component of heating, ventilation, and air conditioning (short: HVAC) systems, which can both cool and warm interior spaces.
...
systems have made chimney placement less critical, and the use of non-structural gas vent pipe allows a flue gas conduit to be installed around obstructions and through walls.
In fact, most modern high-efficiency heating appliances do not require a chimney. Such appliances are generally installed near an external wall, and a noncombustible wall thimble allows a
vent pipe to run directly through the external wall.
On a pitched roof where a chimney penetrates a roof,
flashing is used to seal up the joints. The down-slope piece is called an apron, the sides receive step flashing and a
cricket
Cricket is a bat-and-ball game played between two teams of eleven players on a field at the centre of which is a pitch with a wicket at each end, each comprising two bails balanced on three stumps. The batting side scores runs by striki ...
is used to divert water around the upper side of the chimney underneath the flashing.
Industrial chimney
A flue-gas stack, also known as a smoke stack, chimney stack or simply as a stack, is a type of chimney, a vertical pipe, channel or similar structure through which combustion product gases called flue gases are exhausted to the outside air. Flue ...
s are commonly referred to as
flue-gas stack
A flue-gas stack, also known as a smoke stack, chimney stack or simply as a stack, is a type of chimney, a vertical pipe, channel or similar structure through which combustion product gases called flue gases are exhausted to the outside air. Flue g ...
s and are generally external structures, as opposed to those built into the wall of a building. They are generally located adjacent to a steam-generating boiler or industrial furnace and the gases are carried to them with ductwork. Today the use of reinforced
concrete
Concrete is a composite material composed of fine and coarse aggregate bonded together with a fluid cement (cement paste) that hardens (cures) over time. Concrete is the second-most-used substance in the world after water, and is the most wi ...
has almost entirely replaced brick as a
structural element in the construction of industrial chimneys.
Refractory
In materials science, a refractory material or refractory is a material that is resistant to decomposition by heat, pressure, or chemical attack, and retains strength and form at high temperatures. Refractories are polycrystalline, polyphase, ...
bricks are often used as a lining, particularly if the type of fuel being burned generates flue gases containing acids. Modern industrial chimneys sometimes consist of a concrete
windshield
The windshield (North American English) or windscreen (Commonwealth English) of an aircraft, car, bus, motorbike, truck, train, boat or streetcar is the front window, which provides visibility while protecting occupants from the elements. Mo ...
with a number of flues on the inside.
The high steam plant chimney at the
Secunda CTL
Secunda CTL is a synthetic fuel plant owned by Sasol at Secunda, Mpumalanga in South Africa. It uses coal liquefaction to produce petroleum-like synthetic crude oil from coal. The process used by Sasol is based on the Fischer–Tropsch process. It ...
's synthetic fuel plant in Secunda, South Africa consists of a 26 m (85 ft) diameter windshield with four 4.6 metre diameter concrete flues which are lined with refractory bricks built on rings of
corbel
In architecture, a corbel is a structural piece of stone, wood or metal jutting from a wall to carry a superincumbent weight, a type of bracket. A corbel is a solid piece of material in the wall, whereas a console is a piece applied to the s ...
s spaced at 10 metre intervals. The reinforced concrete can be cast by conventional formwork or sliding formwork. The height is to ensure the pollutants are dispersed over a wider area to meet legal or other safety requirements.
Residential flue liners
![ChimneyProvidenceProspectPark](https://upload.wikimedia.org/wikipedia/commons/5/5a/ChimneyProvidenceProspectPark.jpg)
A flue liner is a secondary barrier in a chimney that protects the masonry from the acidic products of combustion, helps prevent
flue gas
Flue gas is the gas exiting to the atmosphere via a flue, which is a pipe or channel for conveying exhaust gases from a fireplace, oven, furnace, boiler or steam generator. Quite often, the flue gas refers to the combustion exhaust gas produced a ...
from entering the house, and reduces the size of an oversized flue. Since the 1950s, building codes in many locations require newly built chimneys to have a flue liner. Chimneys built without a liner can usually have a liner added, but the type of liner needs to match the type of appliance it services. Flue liners may be clay or concrete tile, metal, or poured in place concrete.
Clay tile flue liners are very common in the United States, although it is the only liner that does not meet
Underwriters Laboratories 1777 approval and frequently they have problems such as cracked tiles and improper installation.
[Bliss, Stephen, ed.. ''Troubleshooting guide to residential construction: the diagnosis and prevention of common building problems''. Richmond, VT: Builderburg Group, 1997. 197. Print.] Clay tiles are usually about long, available in various sizes and shapes, and are installed in new construction as the chimney is built. A
refractory cement
Concrete is produced in a variety of compositions, finishes and performance characteristics to meet a wide range of needs.
Mix design
Modern concrete mix designs can be complex. The choice of a concrete mix depends on the need of the project ...
is used between each tile.
Metal liners may be stainless steel, aluminum, or galvanized iron and may be flexible or rigid pipes. Stainless steel is made in several types and thicknesses. Type 304 is used with
firewood
Firewood is any wooden material that is gathered and used for fuel. Generally, firewood is not highly processed and is in some sort of recognizable log or branch form, compared to other forms of wood fuel like pellets or chips. Firewood can ...
, wood
pellet fuel
Pellet fuels (or pellets) are biofuels made from compressed organic matter or biomass. Pellets can be made from any one of five general categories of biomass: industrial waste and co-products, food waste, agricultural residues, energy crops, and ...
, and non-condensing
oil appliances, types 316 and 321 with coal, and type AL 29-4C is used with high efficiency condensing gas appliances. Stainless steel liners must have a cap and be insulated if they service solid fuel appliances, but following the manufacturer's instructions carefully.
Aluminum and galvanized steel chimneys are known as class A and class B chimneys. Class A are either an insulated, double wall stainless steel pipe or triple wall, air-insulated pipe often known by its genericized trade name Metalbestos. Class B are uninsulated double wall pipes often called B-vent, and are only used to vent non-condensing gas appliances. These may have an aluminum inside layer and galvanized steel outside layer.
Concrete flue liners are like clay liners but are made of a refractory cement and are more durable than the clay liners.
Poured in place concrete liners are made by pouring special concrete into the existing chimney with a form. These liners are highly durable, work with any heating appliance, and can reinforce a weak chimney, but they are irreversible.
Chimney pots, caps, and tops
![Clovelly (Devon, UK) -- 2013 -- 1349](https://upload.wikimedia.org/wikipedia/commons/b/bd/Clovelly_%28Devon%2C_UK%29_--_2013_--_1349.jpg)
A chimney pot is placed on top of the chimney to expand the length of the chimney inexpensively, and to improve the chimney's
draft. A chimney with more than one pot on it indicates that multiple fireplaces on different floors share the chimney.
A
cowl is placed on top of the chimney to prevent birds and other animals from nesting in the chimney. They often feature a rain guard to prevent rain or snow from going down the chimney. A metal wire mesh is often used as a
spark arrestor to minimize burning debris from rising out of the chimney and making it onto the roof. Although the masonry inside the chimney can absorb a large amount of moisture which later evaporates, rainwater can collect at the base of the chimney. Sometimes weep holes are placed at the bottom of the chimney to drain out collected water.
![Common chimney cowl Oregon](https://upload.wikimedia.org/wikipedia/commons/e/ed/Common_chimney_cowl_Oregon.JPG)
A chimney cowl or wind directional cap is a helmet-shaped chimney cap that rotates to align with the wind and prevent a downdraft of smoke and wind down the chimney.
![H-style cap](https://upload.wikimedia.org/wikipedia/commons/9/90/H-style_cap.jpg)
An ''H-style cap'' is a chimney top constructed from chimney pipes shaped like the letter H. It is an age-old method of regulating draft in situations where prevailing winds or turbulences cause downdraft and backpuffing. Although the H cap has a distinct advantage over most other downdraft caps, it fell out of favor because of its bulky design. It is found mostly in marine use but has been regaining popularity due to its energy-saving functionality. The H-cap stabilizes the draft rather than increasing it. Other downdraft caps are based on the
Venturi effect, solving downdraft problems by increasing the updraft constantly resulting in much higher fuel consumption.
A chimney damper is a metal plate that can be positioned to close off the chimney when not in use and prevent outside air from entering the interior space, and can be opened to permit hot gases to exhaust when a fire is burning. A ''top damper'' or ''cap damper'' is a metal spring door placed at the top of the chimney with a long metal chain that allows one to open and close the damper from the fireplace. A ''throat damper'' is a metal plate at the base of the chimney, just above the firebox, that can be opened and closed by a lever, gear, or chain to seal off the fireplace from the chimney. The advantage of a top damper is the tight weatherproof seal that it provides when closed, which prevents cold outside air from flowing down the chimney and into the living space—a feature that can rarely be matched by the metal-on-metal seal afforded by a throat damper. Additionally, because the throat damper is subjected to intense heat from the fire directly below, it is common for the metal to become warped over time, thus further degrading the ability of the throat damper to seal. However, the advantage of a throat damper is that it seals off the living space from the air mass in the chimney, which, especially for chimneys positioned on an outside of wall of the home, is generally very cold. It is possible in practice to use both a top damper and a throat damper to obtain the benefits of both. The two top damper designs currently on the market are the Lyemance (pivoting door) and the Lock Top (translating door).
In the late
Middle Ages
In the history of Europe, the Middle Ages or medieval period lasted approximately from the late 5th to the late 15th centuries, similar to the post-classical period of global history. It began with the fall of the Western Roman Empire a ...
in
Western Europe
Western Europe is the western region of Europe. The region's countries and territories vary depending on context.
The concept of "the West" appeared in Europe in juxtaposition to "the East" and originally applied to the ancient Mediterranean ...
the design of
stepped gable
A stepped gable, crow-stepped gable, or corbie step is a stairstep type of design at the top of the triangular gable-end of a building. The top of the parapet wall projects above the roofline and the top of the brick or stone wall is stacked in a ...
s arose to allow maintenance access to the chimney top, especially for tall structures such as
castle
A castle is a type of fortified structure built during the Middle Ages predominantly by the nobility or royalty and by military orders. Scholars debate the scope of the word ''castle'', but usually consider it to be the private fortified r ...
s and great
manor house
A manor house was historically the main residence of the lord of the manor. The house formed the administrative centre of a manor in the European feudal system; within its great hall were held the lord's manorial courts, communal meals w ...
s.
Chimney draught or draft
![Chimney effect](https://upload.wikimedia.org/wikipedia/commons/d/df/Chimney_effect.svg)
When coal, oil, natural gas, wood, or any other fuel is combusted in a stove, oven, fireplace, hot water boiler, or industrial furnace, the hot combustion product gases that are formed are called flue gases. Those gases are generally exhausted to the ambient outside air through chimneys or industrial flue-gas stacks (sometimes referred to as smokestacks).
The combustion flue gases inside the chimneys or stacks are much hotter than the ambient outside air and therefore less
dense
Density (volumetric mass density or specific mass) is the substance's mass per unit of volume. The symbol most often used for density is ''ρ'' (the lower case Greek letter rho), although the Latin letter ''D'' can also be used. Mathematically ...
than the ambient air. That causes the bottom of the vertical column of hot flue gas to have a lower
pressure
Pressure (symbol: ''p'' or ''P'') is the force applied perpendicular to the surface of an object per unit area over which that force is distributed. Gauge pressure (also spelled ''gage'' pressure)The preferred spelling varies by country and e ...
than the pressure at the bottom of a corresponding column of outside air. That higher pressure outside the chimney is the driving force that moves the required combustion air into the combustion zone and also moves the flue gas up and out of the chimney. That movement or flow of combustion air and flue gas is called "natural draught/draft",
"natural ventilation", "chimney effect", or "
stack effect
The stack effect or chimney effect is the movement of air into and out of buildings through unsealed openings, chimneys, flue-gas stacks, or other containers, resulting from air buoyancy. Buoyancy occurs due to a difference in indoor-to-outdoor a ...
". The taller the stack, the more draught or draft is created. There can be cases of diminishing returns: if a stack is overly tall in relation to the heat being sent out of the stack, the flue gases may cool before reaching the top of the chimney. This condition can result in poor drafting, and in the case of wood burning appliances, the cooling of the gases before emission can cause
creosote to condense near the top of the chimney. The creosote can restrict the exit of flue gases and may pose a fire hazard.
Designing chimneys and stacks to provide the correct amount of natural draft involves a number of design factors, many of which require iterative trial-and-error methods.
As a "first guess" approximation, the following equation can be used to estimate the natural draught/draft flow rate by assuming that the
molecular mass
The molecular mass (''m'') is the mass of a given molecule: it is measured in daltons (Da or u). Different molecules of the same compound may have different molecular masses because they contain different isotopes of an element. The related quanti ...
(i.e., molecular weight) of the flue gas and the external air are equal and that the frictional pressure and heat losses are negligible:
where:
* ''Q'' = chimney draught/draft flow rate, m
3/s
* ''A'' = cross-sectional area of chimney, m
2 (assuming it has a constant cross-section)
* ''C'' = discharge coefficient (usually taken to be from 0.65 to 0.70)
* ''g'' =
gravitational acceleration
In physics, gravitational acceleration is the acceleration of an object in free fall within a vacuum (and thus without experiencing drag). This is the steady gain in speed caused exclusively by the force of gravitational attraction. All bodies ...
, 9.807 m/s
2
* ''H'' = height of chimney, m
* ''T
i'' = average temperature inside the chimney,
K
* ''T
e'' = external air temperature, K.
Combining two flows into chimney: ''A''
t+''A''
f<''A'', where ''A''
t=7.1 inch
2 is the minimum required flow area from water heater tank and ''A''
f=19.6 inch
2 is the minimum flow area from a furnace of a central heating system.
Draft hood
Gas fired appliances must have a draft hood to cool combustion products entering the chimney and prevent updrafts or downdrafts.
Maintenance and problems
![New Zealand Parliamentary Library Chimneys](https://upload.wikimedia.org/wikipedia/commons/5/59/New_Zealand_Parliamentary_Library_Chimneys.JPG)
A characteristic problem of chimneys is they develop deposits of
creosote on the walls of the structure when used with wood as a
fuel
A fuel is any material that can be made to react with other substances so that it releases energy as thermal energy or to be used for work. The concept was originally applied solely to those materials capable of releasing chemical energy but ...
. Deposits of this substance can interfere with the airflow and more importantly, they are
combustible and can cause dangerous
chimney fires if the deposits ignite in the chimney.
Heaters that burn natural gas drastically reduce the amount of creosote buildup due to natural gas burning much cleaner and more efficiently than traditional solid fuels. While in most cases there is no need to clean a gas chimney on an annual basis that does not mean that other parts of the chimney cannot fall into disrepair. Disconnected or loose chimney fittings caused by corrosion over time can pose serious dangers for residents due to leakage of carbon monoxide into the home. Thus, it is recommended—and in some countries even mandatory—that chimneys be inspected annually and cleaned on a regular basis to prevent these problems. The workers who perform this task are called
chimney sweeps or
steeplejack
A steeplejack is a craftsman who scales buildings, chimneys, and church steeples to carry out repairs or maintenance.
Steeplejacks erect ladders on church spires, industrial chimneys, cooling towers, bell towers, clock towers, or any other hi ...
s. This work used to be done largely by
child labour
Child labour refers to the exploitation of children through any form of work that deprives children of their childhood, interferes with their ability to attend regular school, and is mentally, physically, socially and morally harmful. Such e ...
and,
as such, features in
Victorian literature
Victorian literature refers to English literature during the reign of Queen Victoria (1837–1901). The 19th century is considered by some to be the Golden Age of English Literature, especially for British novels. It was in the Victorian era tha ...
. In the
Middle Ages
In the history of Europe, the Middle Ages or medieval period lasted approximately from the late 5th to the late 15th centuries, similar to the post-classical period of global history. It began with the fall of the Western Roman Empire a ...
in some parts of Europe, a
stepped gable
A stepped gable, crow-stepped gable, or corbie step is a stairstep type of design at the top of the triangular gable-end of a building. The top of the parapet wall projects above the roofline and the top of the brick or stone wall is stacked in a ...
design was developed, partly to provide access to chimneys without use of ladders.
![Chernobylreactor 1](https://upload.wikimedia.org/wikipedia/commons/d/d8/Chernobylreactor_1.jpg)
Masonry (brick) chimneys have also proven to be particularly prone to crumbling during
earthquakes
An earthquake (also known as a quake, tremor or temblor) is the shaking of the surface of the Earth resulting from a sudden release of energy in the Earth's lithosphere that creates seismic waves. Earthquakes can range in intensity, from ...
. Government housing authorities in cities prone to earthquakes such as
San Francisco
San Francisco (; Spanish language, Spanish for "Francis of Assisi, Saint Francis"), officially the City and County of San Francisco, is the commercial, financial, and cultural center of Northern California. The city proper is the List of Ca ...
,
Los Angeles
Los Angeles ( ; es, Los Ángeles, link=no , ), often referred to by its initials L.A., is the largest city in the state of California and the second most populous city in the United States after New York City, as well as one of the world' ...
, and
San Diego
San Diego ( , ; ) is a city on the Pacific Ocean coast of Southern California located immediately adjacent to the Mexico–United States border. With a 2020 population of 1,386,932, it is the List of United States cities by population, eigh ...
now recommend building new homes with stud-framed chimneys around a metal flue. Bracing or strapping old masonry chimneys has not proven to be very effective in preventing damage or injury from earthquakes. It is now possible to buy "faux-brick" facades to cover these modern chimney structures.
Other potential problems include:
* "
spall
Spall are fragments of a material that are broken off a larger solid body. It can be produced by a variety of mechanisms, including as a result of projectile impact, corrosion, weathering, cavitation, or excessive rolling pressure (as in a ball ...
ing" brick, in which moisture seeps into the brick and then freezes, cracking and flaking the brick and loosening mortar seals.
* shifting foundations, which may degrade integrity of chimney masonry
* nesting or infestation by unwanted animals such as squirrels, racoons, or
chimney swifts
* chimney leaks
* drafting issues, which may allow smoke inside building
* issues with fireplace or heating appliance may cause unwanted degradation or hazards to chimney
Dual-use chimneys
Some very high chimneys are used for carrying antennas of
mobile phone
A mobile phone, cellular phone, cell phone, cellphone, handphone, hand phone or pocket phone, sometimes shortened to simply mobile, cell, or just phone, is a portable telephone that can make and receive calls over a radio frequency link whil ...
services and low power
FM/
TV-transmitters. Special attention must be paid to possible
corrosion
Corrosion is a natural process that converts a refined metal into a more chemically stable oxide. It is the gradual deterioration of materials (usually a metal) by chemical or electrochemical reaction with their environment. Corrosion engine ...
problems if these antennas are near the exhaust of the chimney.
In some cases the chimneys of power stations are used also as
pylons
Pylon may refer to:
Structures and boundaries
* Pylon (architecture), the gateway to the inner part of an Ancient Egyptian temple or Christian cathedral
* Pylon, a support tower structure for suspension bridges or highways
* Pylon, an orange mar ...
. However this type of construction, which is used at several power stations in the former Soviet Union, is not very common, because of corrosion problems of conductor cables.
The Dům Dětí a Mládeže v Modřanech in
Prague
Prague ( ; cs, Praha ; german: Prag, ; la, Praga) is the capital and largest city in the Czech Republic, and the historical capital of Bohemia. On the Vltava river, Prague is home to about 1.3 million people. The city has a temperate ...
,
Czech Republic
The Czech Republic, or simply Czechia, is a landlocked country in Central Europe. Historically known as Bohemia, it is bordered by Austria to the south, Germany to the west, Poland to the northeast, and Slovakia to the southeast. The ...
is equipped with an observation deck.
The chimney of
Beitou Refuse Incineration Plant carries a revolving restaurant.
Cooling tower used as an industrial chimney
At some power stations, which are equipped with plants for the removal of
sulfur dioxide
Sulfur dioxide (IUPAC-recommended spelling) or sulphur dioxide (traditional Commonwealth English) is the chemical compound with the formula . It is a toxic gas responsible for the odor of burnt matches. It is released naturally by volcanic activ ...
and
nitrogen oxide Nitrogen oxide may refer to a binary compound of oxygen and nitrogen, or a mixture of such compounds:
Charge-neutral
*Nitric oxide (NO), nitrogen(II) oxide, or nitrogen monoxide
*Nitrogen dioxide (), nitrogen(IV) oxide
* Nitrogen trioxide (), or n ...
s, it is possible to use the
cooling tower
A cooling tower is a device that rejects waste heat to the atmosphere through the cooling of a coolant stream, usually a water stream to a lower temperature. Cooling towers may either use the evaporation of water to remove process heat and ...
as a chimney. Such cooling towers can be seen in Germany at the
Großkrotzenburg Power Station
Großkrotzenburg Power Station (German: ''Kraftwerk Staudinger'') is a modern coal-fired thermal power station in Großkrotzenburg, Hesse, east of Frankfurt, Germany. It comprises five units with a total capacity of approximately 1900 MW. The uni ...
and at the
Rostock Power Station
Rostock Power Station is a bituminous coal-fired combined heat and power plant operated by Kraftwerks- und Netzgesellschaft mbH (KNG), located in Rostock, Germany. Construction on the plant began in June 1991, and test firing and grid connection we ...
. At power stations that are not equipped for removing sulfur dioxide, such usage of cooling towers could result in serious corrosion problems which are not easy to prevent.
See also
*
Chimenea
A chimenea , also spelled chiminea (from Spanish: ''chimenea'' which derive from French ''cheminée'', "chimney"), is a freestanding front-loading fireplace or oven with a bulbous body and usually a vertical smoke vent or chimney.
History
Hist ...
*
Chimney (locomotive)
*
Cowl (chimney)
A cowl is a usually hood-shaped covering used to increase the draft of a chimney and prevent backflow. The cowl, usually made of galvanized iron, is fitted to the chimney pot to prevent wind blowing the smoke back down into the room below. Und ...
- Includes image of referenced H-style cap/cowl
*
Flue-gas stack
A flue-gas stack, also known as a smoke stack, chimney stack or simply as a stack, is a type of chimney, a vertical pipe, channel or similar structure through which combustion product gases called flue gases are exhausted to the outside air. Flue g ...
*
Funnel (ship)
A funnel is the smokestack or chimney on a ship used to expel boiler steam and smoke or engine exhaust. They are also commonly referred to as stacks.
Purpose
The primary purpose of a ship's funnel(s) is to lift the exhaust gases clear of the ...
*
List of tallest chimneys
This is a list of the tallest chimneys of the world.
Use
Although many kinds of industrial facilities have tall chimneys most of the chimneys with heights of 200 metres and more are part of thermal, especially coal-fired power stations. Only a f ...
*
Silos & Smokestacks National Heritage Area
Silos & Smokestacks National Heritage Area (SSNHA), also known as America's Agricultural Heritage Partnership is one of 49 federally designated National Heritage Areas in the nation and is an Affiliated Area of the National Park Service. Through t ...
*
Solar chimney
References
External links
CICIND - International Committee on Industrial ChimneysChimney Safety Institute of AmericaPower Station Konakovskaya GRES at which chimneys serve as electricity pylons
Article about chimney breast removalChimney Maintenance InformationEuropean Chimney Association ECA; to find further information on chimneysNational Association of Chimney Engineers; UK trade association for the chimney engineering industry
{{Authority control
Architectural elements
Industrial furnaces
Industrial processes
Smoke