Caterpillar inflation is a method of specimen preservation found in

insect collecting Insect collecting refers to the collection of insects and other arthropods for scientific study or as a hobby. Most insects are small and the majority cannot be identified without the examination of minute morphological characters, so entomolo ...

, used mostly during the 19th and early 20th century. As a method of preservation it has largely been replaced by

freeze drying Freeze drying, also known as lyophilization or cryodesiccation, is a low temperature dehydration process that involves freezing the product and lowering pressure, removing the ice by sublimation. This is in contrast to dehydration by most conve ...

and preservation in alcohol. In some cases caterpillar inflation offers better colour retention than preservation in alcohol, although the rise of colour photography rendered this less important. A limitation of the technique was that it could produce poor results, in the form of oversized and distended specimens with poor colour, especially if carried out when the caterpillar was moulting or about to undergo

pupation A pupa ( la, pupa, "doll"; plural: ''pupae'') is the life stage of some insects undergoing transformation between immature and mature stages. Insects that go through a pupal stage are holometabolous: they go through four distinct stages in thei ...

. Colour retention was not always perfect and some collectors painted or dyed their inflated specimens although water colours could distort the skin.

Technique

The caterpillar was first killed. If it was hairy then it was soaked in alcohol for half an hour before being left to dry out. The rear of the caterpillar was then cut open and the contents of the bowels squeezed out by applying gentle pressure to the outside of the caterpillar. Pressure would be applied, working from the rear towards the front of the caterpillar, until the intestines started to protrude from the cut. Forceps would then be used to pull the intestines from the caterpillar's body which would in turn drag out most of the rest of the caterpillar's innards with them. A straw was then inserted into the cut, and air blown into it while the caterpillar was gently heated in order to dry it. For an experienced practitioner the entire process took about 5 to 6 minutes. Once the caterpillar was dry it was ready to be prepared for mounting. This was done by pushing a loop of wire coated in

shellac Shellac () is a resin secreted by the female lac bug on trees in the forests of India and Thailand. It is processed and sold as dry flakes and dissolved in alcohol to make liquid shellac, which is used as a brush-on colorant, food glaze and ...

into the caterpillar via the cut, after which the wire was attached to an entomological pin for mounting in a storage cabinet. Various devices, such as miniature alcohol heated ovens, were developed to apply the techniques with different

entomologist Entomology () is the scientific study of insects, a branch of zoology. In the past the term "insect" was less specific, and historically the definition of entomology would also include the study of animals in other arthropod groups, such as arach ...

s taking different approaches. A closely related technique was to inject the caterpillar with wax after the organ removal stage.

References

{{reflist, 30em Entomology