Canadair CF 116 CF-5A Freedom Fighter

Canadair Ltd. was a civil and military aircraft manufacturer in Canada. In 1986, its assets were acquired by Bombardier Aerospace, the aviation division of Canadian transport conglomerate Bombardier Inc.

Canadair's origins lie in the establishment of a factory for Canadian Vickers in the Saint-Laurent borough of Montreal, at Cartierville Airport. It was created as a separate entity by the government of Canada on 11 November, 1944.

Throughout much of its existence, it was a subsidiary of various other aircraft manufacturers prior to being nationalized by the Canadian government in 1976.
For a decade, the company operated as a federally-owned Crown Corporation. In 1986, Canadair was privatized via its sale to Bombardier, after which it became a core element of the firm's aerospace division. The company's former principal manufacturing facility, ''Canadair Plant One'', remains intact to the present day, although Cartierville Airport itself has been closed and since undergone redevelopment.

During its operational years, Canadair achieved several aviation firsts; the CL-44D, based on the British Bristol Britannia airliner, was the first design that allowed access by swinging the entire rear fuselage. The CL-89 and CL-289 were the first surveillance drones to be put into service in several countries' armed forces. The experimental CL-84 was the first VTOL aircraft that rotated the wings to achieve vertical lift-off (tiltwing). The CL-215 was the first purpose-designed water bomber.

History

Canadair was formally created on 11 November 1944 as a separate entity by the government of Canada. Having absorbed the operations of the Canadian Vickers company, it initially operated as a manufacturer of Consolidated PBY "Canso" flying boats on behalf of the Royal Canadian Air Force (RCAF). Benjamin W. Franklin became its first president. In addition to the PBY contract, a development contract to produce a new variant of the Douglas DC-4 transport was also underway. The resulting aircraft, the Canadair DC-4M, which was powered by an arrangement of four British-sourced Rolls-Royce Merlin engines, began production during 1946; it was marketed under the "Northstar" name.

During the immediate postwar era, Canadair purchased the "work in progress" on the existing Douglas DC-3/C-47 series. In 1946, the Electric Boat Company, an American industrial group, bought a controlling interest in the company; shortly thereafter, the two companies merged to form the American company General Dynamics in 1952. During 1954, General Dynamics opted to purchase Convair, which had been created by the merger of Consolidated Aircraft and Vultee Aircraft; as a result of this purchase, Canadair was reorganised as Convair's Canadian subsidiary.

During the 1950s, Canadair decided that it would develop its own indigenous trainer aircraft as a private venture. This aircraft, which would become the CT-114 Tutor was the product of the company’s in-house Preliminary Design department.Norris 1998, p. 22. By August 1957, the basic configuration had been completed, which was of a turbojet-powered, low-wing aircraft, complete with a tricycle undercarriage and a side-by-side cockpit arrangement. Despite a lack of official backing from the Canadian Government, the Royal Canadian Air Force's (RCAF) Directorate of Training’s Jet Trainer Liaison Committee had closely engaged with the company; their involvement in the project had reportedly made a significant impact in the aircraft's final design.Upton, Bill
"CL-41 Prototype."
''Canadian Aviation Historical Society'', Retrieved: 31 May 2019. During September 1961, the Canadian government, having been impressed by the performance of the prototype, placed a sizeable order for 190 production aircraft on behalf of the Royal Canadian Air Force (RCAF). Serving as the service's primary trainer platform, the Tutor would be operated as such for over thirty years."CT-114 Tutor."
''airforce.forces.gc.ca'', Retrieved: 31 May 2019.

Another indigenously-developed design was the CL-215 amphibian. It arose from an internal research study during the early 1960s at Canadair, originally conceived of as a twin-engined floatplane transport based on the design of the ''369 Canso'' (a variant of the PBY). However, it was altered into a "firefighter" following a request by forestry officials in the Quebec Service Aérien ( Quebec Government Air Service) who wanted a more effective way of delivering water to forest fires. The 1962 preliminary design, designated as the ''CL-204'', was a purpose-designed water bomber that evolved into an amphibian flying boat configuration, powered by two shoulder-mounted Pratt & Whitney R-2800 piston engines.Flight International 1968, p. 269. Its design was shaped by a desire for the CL-205 to be well-suited for performing a range of roles, including air-sea search and rescue, cargo haulage and commercial passenger-carrying, in addition to the water bomber mission.Flight International 1968, pp. 269, 271. The definitive design was publicly revealed at the 1965 Paris Air Show."Canadair CL-215."
''Flight International'', 21 November 1968. p. 871. While the ''CL-215A'' served as the standard water bomber configuration, another model, designated as the ''CL-215C'', had been envisioned to dispense with compromises meant to enhance its performance at the water bomber role, allowing it be furnished with larger doors on the sides of the fuselage and a revised underfloor hull structure.Flight International 1968, p. 272.

Perhaps the company's most commercially successful product was the Challenger 600 business jet. Originally conceived of by the American aviation inventor Bill Lear as the ''LearStar 600'', at the end of 1975, Canadair gave its backing to the concept; during April 1976, the company opted to acquire the whole project, formally launching it with the backing of the Canadian federal government shortly thereafter. Development of the Challenger 600 was hampered by a deadly crash amid the flight test programme on 3 April 1980; despite this, type certification for the aircraft was approved by both Transport Canada and the Federal Aviation Administration later that same year., The high cost of developing the Challenger 600 has been attributed as a major cause of Canadair's poor financial situation during the 1980s, being reportedly close to bankruptcy; the company's condition in turn ultimately contributed to its acquisition by Bombardier Inc. during 1986. In the long run, the business jet was well received by the market and can be considered to be a success, being produced for over four decades. In excess of 1,000 Challenger 600s had been reportedly completed by late 2018.

Outside of the field of aviation, Canadair opted to diversify into various other sectors, developing its own range of industrial and commercial products. The "Canarch" division was involved in curtain wall design and manufacture for a number of buildings. They also produce the cabins for many air traffic control towers operated by the Federal Aviation Administration in the United States. Both tracked and air-cushioned vehicles were designed and underwent testing; however none proceeded into commercial production.

In the late 1950s, the United States Army contracted Canadair to develop a small light-weight all-terrain amphibious tracked vehicle. In turn, Canadair developed the CL-70 RAT ''Remote Articulated Track''; this vehicle, while not a commercial success, gave Canadair useful experience towards the development of the upgraded CL-91 Dynatrac, which was a marketing success and purchased by the US Army as ''XM-571''.

During 1976, the Canadian government acquired Canadair Ltd. from General Dynamics. It remained a federal crown corporation until 1986 when, having experienced record losses during its development of the Challenger business jet, the Mulroney government sold it to Bombardier Inc. Shortly after Canadair's acquisition, Bombardier was able to restore it to profitability; the company soon acquired other aviation companies, such as the near-bankrupt Short Brothers of Belfast, Northern Ireland, and the business jet specialist Learjet of Wichita, Kansas, American, as well as de Havilland Aircraft of Canada of Toronto, Ontario. Together with these other entities, Canadair became a core component of Bombardier Aerospace.

Following the company's acquisition by Bombardier, the Canadair name had continued to be prominently used in the branding of its larger series of business jets and regional jets, which have been marketed as the Canadian Regional Jet (CRJ). However, this branding has since been dropped; new projects from all of Bombardier's various aircraft divisions have since simply been known as Bombardier Aerospace.

Products

Missiles

*Velvet Glove - Air-to-air missile project.

See also

* Bombardier Aerospace
* de Havilland Canada
* Learjet
* Short Brothers

References

Citiations

Bibliography

* Dishlevoy, Roy W. "Hatching the Snowbirds: The Canadair CL-41/CT-114 Tutor, Its Early History Remembered." ''CAHS Journal,'' Vol, 45, No. 1, Spring 2007.
* "Canadair CL-215". ''Flight International'', 22 February 1968. pp. 269–272.
* Milberry, Larry. ''The Canadair North Star.'' Toronto: CANAV Books, 1982. .
* Milberry, Larry. ''The Canadair Sabre.'' Toronto: CANAV Books, 1986. .
* Marsaly, Frederic and Samuel Pretat
"Bombardiers d'eau/ Canadair Scoopers."
''Editions Minimonde76,'' May 2012. .
* Norris, Guy

''Flight International'', 6 January 1998. pp. 22–23.
* Pickler, Ron and Milberry, Larry. ''Canadair: The First 50 Years.'' Toronto: CANAV Books, 1995. .
*

External links

Other (Canadair) Products

{{Authority control

Defunct aircraft manufacturers of Canada
Bombardier Aerospace
Emergency services equipment makers
Former Crown corporations of Canada
Companies based in Montreal
Former defence companies of Canada
Defunct helicopter manufacturers