Bliss House Newport

BLISS is a system programming language developed at Carnegie Mellon University (CMU) by W. A. Wulf, D. B. Russell, and A. N. Habermann around 1970. It was perhaps the best known system language until C debuted a few years later. Since then, C became popular and common, and BLISS faded into obscurity. When C was in its infancy, a few projects within Bell Labs debated the merits of BLISS vs. C.

BLISS is a typeless block-structured programming language based on expressions rather than statements, and includes constructs for exception handling, coroutines, and macros. It does not include a goto statement.

The name is variously said to be short for ''Basic Language for Implementation of System Software'' or ''System Software Implementation Language, Backwards''. It was sometimes called "Bill's Language for Implementing System Software", after Bill Wulf.

The original Carnegie Mellon compiler was notable for its extensive use of optimizations, and formed the basis of the classic book ''The Design of an Optimizing Compiler''.

Digital Equipment Corporation (DEC) developed and maintained BLISS compilers for the PDP-10, PDP-11, VAX, DEC PRISM, MIPS, DEC Alpha, and Intel IA-32, The language did not become popular among customers and few had the compiler, but DEC used it heavily in-house into the 1980s; most of the utility programs for the OpenVMS operating system were written in BLISS-32. The DEC BLISS compiler has been ported to the IA-64 and x86-64 architectures as part of the ports of OpenVMS to these platforms. The x86-64 BLISS compiler uses LLVM as its backend code generator, replacing the proprietary GEM backend used for Alpha and IA-64.

Language description

The BLISS language has the following characteristics:

* All ''constants'' are full word for the machine being used, e.g. on a 16-bit machine such as the PDP-11, a constant is 16 bits; on a VAX computer, constants are 32 bits, and on a PDP-10, a constant is 36 bits.
* A ''reference to a variable'' is always to the address of that variable. For example, the instruction Z+8 refers to adding 8 to the ''address'' of Z, not to its ''value''. If one needs to add 8 to the ''value'' of Z, one must prefix the variable with a period; so one would type .Z+8 to perform this function, which adds 8 to the ''contents'' of Z.
* ''Assignment'' is done with the standard = symbol, e.g. Z=8 – which says to create a full-word constant containing 8, and store it in the location whose address corresponds to that of Z. So Z+12=14 (or, alternatively 12+Z=14) places the constant 14 into the location which is 12 words after the address of Z. (This is considered bad practice.)
* ''Block statements'' are similar to those of ALGOL: a block is started with a BEGIN statement and terminated with END. As with ALGOL, statements are terminated with the semicolon (";"). When a value is computed, it is saved until the next statement terminator – which means that a value can be computed, assigned to a variable, and carried forward to the next statement, if desired. Alternatively, an open parenthesis may be used to begin a block, with the close parenthesis used to close the block. When parentheses are included in an expression, the standard precedence rules are used, in which parenthesized expressions are computed first,
* ''Conditional execution'' uses the IF expression, which tests a true-false condition, performs alternative actions, and returns a result.
* ''Comparison'' uses keywords such as EQL for equality (as opposed to overloading the = symbol for the same purpose), GTR for Greater Than, and NEQ for not equal. For example, the following code will assign the absolute value of Z to the address indicated by Q:

::Q = (IF .Z GTR 0 THEN .Z ELSE -.Z);

* ''Identifiers'' (variables and constants) must be declared before use, typically using the OWN keyword. Declaring a variable normally causes the compiler to allocate space for it; when necessary, a variable may be assigned a fixed machine address via the BIND declaration. This feature is primarily used for accessing either machine registers or certain special addresses.
* ''Subroutines'' in the language are called ''routines'', and are declared with the keyword ROUTINE.
* ''Macros'', which allow for text substitution, are declared with the keyword MACRO.
* The language supports '' arrays'', which are referred to as ''structures'', and declared with the keyword VECTOR.
* The language supports some ''high-level programming language constructs'' such as:
**''Alternative execution paths'' via the CASE expression
**''Looping'' through use of the INCR expression, which is similar to ALGOL's FOR statement
**Built-in ''string functions''
**Certain automatic ''data conversions'' (number to string, etc.)

Source example

The following example is taken verbatim from the ''Bliss Language Manual'':

MODULE E1 (MAIN = CTRL) =
BEGIN
FORWARD ROUTINE
CTRL,
STEP;
ROUTINE CTRL =
!+
! This routine inputs a value, operates on it, and
! then outputs the result.
!-
BEGIN
EXTERNAL ROUTINE
GETNUM, ! Input a number from terminal
PUTNUM; ! Output a number to terminal
LOCAL
X, ! Storage for input value
Y; ! Storage for output value
GETNUM(X);
Y = STEP(.X);
PUTNUM(.Y)
END;
ROUTINE STEP(A) =
!+
! This routine adds 1 to the given value.
!-
(.A+1);
END
ELUDOM

Versions

* BLISS-10
* BLISS-11 - a cross compiler for the PDP-11
* BLISS-16
* BLISS-16C - DEC version of BLISS-11
* BLISS-32
* BLISS-36
* BLISS-64
* Common BLISS - portable subset

Notes

References

* Also
"BLISS: A Language for Systems Programming"
(PostScript)
* Wulf, W. A.; Johnson, R. K.; Weinstock, C. B.; Hobbs, S. O.; Geschke, C. M. (1975). ''The Design of an Optimizing Compiler''. New York: Elsevier, .
*

External links

BLISS Manual at DECUS

* Lehotsky, Alan
a post about BLISS at DEC

* Madison, Matthew D.
Session notes for "Introduction to BLISS"
(PostScript)

Downloads

BLISS-10
* tp://ftp.iecc.com/pub/file/bliss.tar.gz BLISS-11
BLISS-36

BLISS-11, BLISS-32 and BLISS-64
* tp://freevms.nvg.org/pub/vms/freevms/ FreeVMS Portable BLISS for GCC
{{Carnegie Mellon

Systems programming languages
OpenVMS software
Carnegie Mellon University software
Programming languages
Programming languages created in 1970