HOME

TheInfoList



OR:

A bicycle, also called a pedal cycle, bike or cycle, is a human-powered or motor-powered assisted, pedal-driven,
single-track vehicle A single-track vehicle is a vehicle that leaves a single ground track as it moves forward. Single-track vehicles usually have little or no lateral stability when stationary but develop it when moving forward or controlled. In the case of wheeled v ...
, having two
wheels A wheel is a circular component that is intended to rotate on an axle bearing. The wheel is one of the key components of the wheel and axle which is one of the six simple machines. Wheels, in conjunction with axles, allow heavy objects to be ...
attached to a
frame A frame is often a structural system that supports other components of a physical construction and/or steel frame that limits the construction's extent. Frame and FRAME may also refer to: Physical objects In building construction *Framing (con ...
, one behind the other. A is called a cyclist, or bicyclist. Bicycles were introduced in the 19th century in Europe. By the early 21st century, more than 1 billion were in existence. These numbers far exceed the number of cars, both in total and ranked by the number of individual models produced. They are the principal
means of transportation Mode of transport is a term used to distinguish between different ways of transportation or transporting people or goods. The different modes of transport are air, water, and land transport, which includes rails or railways, road and off-road t ...
in many regions. They also provide a popular form of
recreation Recreation is an activity of leisure, leisure being discretionary time. The "need to do something for recreation" is an essential element of human biology and psychology. Recreational activities are often done for enjoyment, amusement, or pleasur ...
, and have been adapted for use as children's toys, general fitness, military and police applications,
courier services A courier is a person or organisation that delivers a message, package or letter from one place or person to another place or person. Typically, a courier provides their courier service on a commercial contract basis; however, some couriers are ...
,
bicycle racing Cycle sport is competitive physical activity using bicycles. There are several categories of bicycle racing including road bicycle racing, cyclo-cross, mountain bike racing, track cycling, BMX, and cycle speedway. Non-racing cycling s ...
, and bicycle stunts. The basic shape and configuration of a typical upright or "safety bicycle", has changed little since the first chain-driven model was developed around 1885. However, many details have been improved, especially since the advent of modern materials and
computer-aided design Computer-aided design (CAD) is the use of computers (or ) to aid in the creation, modification, analysis, or optimization of a design. This software is used to increase the productivity of the designer, improve the quality of design, improve c ...
. These have allowed for a proliferation of specialized designs for many types of cycling. The bicycle's invention has had an enormous effect on society, both in terms of culture and of advancing modern industrial methods. Several components that played a key role in the development of the automobile were initially invented for use in the bicycle, including
ball bearing A ball bearing is a type of rolling-element bearing that uses balls to maintain the separation between the bearing races. The purpose of a ball bearing is to reduce rotational friction and support radial and axial loads. It achieves this ...
s,
pneumatic tires A tire (American English) or tyre (British English) is a ring-shaped component that surrounds a wheel's rim to transfer a vehicle's load from the axle through the wheel to the ground and to provide traction on the surface over which t ...
,
chain-driven sprocket Roller chain or bush roller chain is the type of chain drive most commonly used for transmission of mechanical power on many kinds of domestic, industrial and agricultural machinery, including conveyors, wire- and tube-drawing machines, printi ...
s and tension-spoked wheels. Although bike and cycle are used interchangeably to refer mostly to two types of two-wheelers, the terms still vary across the world. In India, for example, a cycle refers only to a two-wheeler using pedal power whereas the term bike is used to describe a two-wheeler using
internal combustion engine An internal combustion engine (ICE or IC engine) is a heat engine in which the combustion of a fuel occurs with an oxidizer (usually air) in a combustion chamber that is an integral part of the working fluid flow circuit. In an internal combus ...
or
electric motors An electric motor is an electrical machine that converts electrical energy into mechanical energy. Most electric motors operate through the interaction between the motor's magnetic field and electric current in a wire winding to generate force ...
as a source of motive power instead of motorcycle/motorbike.


Etymology

The word ''bicycle'' first appeared in English print in '' The Daily News'' in 1868, to describe "Bysicles and trysicles" on the "Champs Elysées and Bois de Boulogne". The word was first used in 1847 in a French publication to describe an unidentified two-wheeled vehicle, possibly a carriage. The design of the bicycle was an advance on the
velocipede A velocipede () is a human-powered land vehicle with one or more wheels. The most common type of velocipede today is the bicycle. The term was probably first coined by Karl von Drais in French as ''vélocipède'' for the French translation o ...
, although the words were used with some degree of overlap for a time. Other words for bicycle include "bike", "pushbike", "pedal cycle", or "cycle". In
Unicode Unicode, formally The Unicode Standard,The formal version reference is is an information technology Technical standard, standard for the consistent character encoding, encoding, representation, and handling of Character (computing), text expre ...
, the
code point In character encoding terminology, a code point, codepoint or code position is a numerical value that maps to a specific character. Code points usually represent a single grapheme—usually a letter, digit, punctuation mark, or whitespace—but ...
for "bicycle" is 0x1F6B2. The
entity An entity is something that exists as itself, as a subject or as an object, actually or potentially, concretely or abstractly, physically or not. It need not be of material existence. In particular, abstractions and legal fictions are usually ...
🚲 in
HTML The HyperText Markup Language or HTML is the standard markup language for documents designed to be displayed in a web browser. It can be assisted by technologies such as Cascading Style Sheets (CSS) and scripting languages such as JavaScri ...
produces 🚲.


History

The "
dandy horse The dandy horse, a derogatory term for what was first called a Laufmaschine (in German), then a vélocipède or draisienne (in French and then English), and then a pedestrian curricle or hobby-horse, or swiftwalker, is a human-powered vehicle th ...
", also called ''Draisienne'' or ''Laufmaschine'' ("running machine"), was the first human means of transport to use only two wheels in
tandem Tandem, or in tandem, is an arrangement in which a team of machines, animals or people are lined up one behind another, all facing in the same direction. The original use of the term in English was in ''tandem harness'', which is used for two ...
and was invented by the German
Baron Baron is a rank of nobility or title of honour, often hereditary, in various European countries, either current or historical. The female equivalent is baroness. Typically, the title denotes an aristocrat who ranks higher than a lord or knig ...
Karl von Drais Karl Freiherr von Drais (full name: Karl Friedrich Christian Ludwig Freiherr Drais von Sauerbronn) (29 April 1785 – 10 December 1851) was a noble German forest official and significant inventor in the Biedermeier period. He was born and died ...
. It is regarded as the first bicycle and von Drais is seen as the "father of the bicycle", but it did not have pedals. Von Drais introduced it to the public in
Mannheim Mannheim (; Palatine German: or ), officially the University City of Mannheim (german: Universitätsstadt Mannheim), is the second-largest city in the German state of Baden-Württemberg after the state capital of Stuttgart, and Germany's 2 ...
in 1817 and in Paris in 1818. Its rider sat astride a wooden frame supported by two in-line wheels and pushed the vehicle along with his or her feet while steering the front wheel. The first mechanically propelled, two-wheeled vehicle may have been built by Kirkpatrick MacMillan, a Scottish blacksmith, in 1839, although the claim is often disputed. He is also associated with the first recorded instance of a cycling traffic offense, when a Glasgow newspaper in 1842 reported an accident in which an anonymous "gentleman from Dumfries-shire... bestride a velocipede... of ingenious design" knocked over a little girl in Glasgow and was fined five
shilling The shilling is a historical coin, and the name of a unit of modern currencies formerly used in the United Kingdom, Australia, New Zealand, other British Commonwealth countries and Ireland, where they were generally equivalent to 12 pence o ...
s (). In the early 1860s, Frenchmen
Pierre Michaux Pierre Michaux (June 25, 1813 – 1883) was a blacksmith who furnished parts for the carriage trade in Paris during the 1850s and 1860s. He may have become the inventor of the bicycle when he added pedals to a draisine to form the Michaudin ...
and
Pierre Lallement Pierre Lallement (; October 25, 1843 – August 29, 1891) is considered by some''New York Times'' accessed July 18, 2010 to be the inventor of the pedal bicycle. Early years Lallement was born on October 25, 1843 in Pont-à-Mousson near Nancy, Fr ...
took bicycle design in a new direction by adding a mechanical crank drive with pedals on an enlarged front wheel (the
velocipede A velocipede () is a human-powered land vehicle with one or more wheels. The most common type of velocipede today is the bicycle. The term was probably first coined by Karl von Drais in French as ''vélocipède'' for the French translation o ...
). This was the first in mass production. Another French inventor named Douglas Grasso had a failed prototype of Pierre Lallement's bicycle several years earlier. Several inventions followed using rear-wheel drive, the best known being the rod-driven velocipede by Scotsman Thomas McCall in 1869. In that same year, bicycle wheels with wire spokes were patented by Eugène Meyer of Paris. The French ''vélocipède'', made of iron and wood, developed into the "
penny-farthing The penny-farthing, also known as a high wheel, high wheeler or ordinary, is an early type of bicycle. It was popular in the 1870s and 1880s, with its large front wheel providing high speeds (owing to its travelling a large distance for every r ...
" (historically known as an "ordinary bicycle", a
retronym A retronym is a newer name for an existing thing that helps differentiate the original form/version from a more recent one. It is thus a word or phrase created to avoid confusion between older and newer types, whereas previously (before there were ...
, since there was then no other kind). It featured a tubular steel frame on which were mounted wire-spoked wheels with solid rubber tires. These bicycles were difficult to ride due to their high seat and poor
weight distribution Weight distribution is the apportioning of weight within a vehicle, especially cars, airplanes An airplane or aeroplane (informally plane) is a fixed-wing aircraft that is propelled forward by thrust from a jet engine, propeller, or rocke ...
. In 1868 Rowley Turner, a sales agent of the Coventry Sewing Machine Company (which soon became the Coventry Machinists Company), brought a Michaux cycle to
Coventry Coventry ( or ) is a City status in the United Kingdom, city in the West Midlands (county), West Midlands, England. It is on the River Sherbourne. Coventry has been a large settlement for centuries, although it was not founded and given its ...
, England. His uncle, Josiah Turner, and business partner
James Starley James Starley (21 April 1830 – 17 June 1881) was an English inventor and father of the bicycle industry. He was one of the most innovative and successful builders of bicycles and tricycles. His inventions include the differential gear and the ...
, used this as a basis for the 'Coventry Model' in what became Britain's first cycle factory. The ''dwarf ordinary'' addressed some of these faults by reducing the front wheel
diameter In geometry, a diameter of a circle is any straight line segment that passes through the center of the circle and whose endpoints lie on the circle. It can also be defined as the longest chord of the circle. Both definitions are also valid for ...
and setting the
seat A seat is a place to sit. The term may encompass additional features, such as back, armrest, head restraint but also headquarters in a wider sense. Types of seat The following are examples of different kinds of seat: * Armchair (furniture), ...
further back. This, in turn, required gearing—effected in a variety of ways—to efficiently use pedal power. Having to both pedal and steer via the front wheel remained a problem. Englishman J.K. Starley (nephew of James Starley), J.H. Lawson, and Shergold solved this problem by introducing the
chain drive Chain drive is a way of transmitting mechanical power from one place to another. It is often used to convey power to the wheels of a vehicle, particularly bicycles and motorcycles. It is also used in a wide variety of machines besides vehicles. ...
(originated by the unsuccessful "bicyclette" of Englishman Henry Lawson), connecting the frame-mounted cranks to the rear wheel. These models were known as
safety bicycle A safety bicycle (or simply a safety) is a type of bicycle that became very popular beginning in the late 1880s as an alternative to the penny-farthing ("ordinary") and is now the most common type of bicycle. Early bicycles of this style were kno ...
s, dwarf safeties, or upright bicycles for their lower seat height and better weight distribution, although without pneumatic tires the ride of the smaller-wheeled bicycle would be much rougher than that of the larger-wheeled variety. Starley's 1885
Rover Rover may refer to: People * Constance Rover (1910–2005), English historian * Jolanda de Rover (born 1963), Dutch swimmer * Rover Thomas (c. 1920–1998), Indigenous Australian artist Places * Rover, Arkansas, US * Rover, Missouri, US * ...
, manufactured in Coventry is usually described as the first recognizably modern bicycle. Soon the ''seat tube'' was added which created the modern bike's double-triangle ''diamond frame''. Further innovations increased comfort and ushered in a second
bicycle craze The bike boom or bicycle craze is any of several specific historic periods marked by increased bicycle enthusiasm, popularity, and sales. Prominent examples include 1819 and 1868, as well as the decades of the 1890s and 1970sthe latter espe ...
, the 1890s ''Golden Age of Bicycles''. In 1888, Scotsman
John Boyd Dunlop John Boyd Dunlop (5 February 1840 – 23 October 1921) was a Scottish-born inventor and veterinary surgeon who spent most of his career in Ireland. Familiar with making rubber devices, he invented the first practical pneumatic tyres for his c ...
introduced the first practical pneumatic tire, which soon became universal.
Willie Hume William Hume (3 April 1862 – 1941The Bicycle, 12 Nov 1941, p6) was an Irish cyclist. He demonstrated the supremacy of John Boyd Dunlop's newly invented pneumatic tyres in 1889, winning the tyre's first ever races in Ireland and then Englan ...
demonstrated the supremacy of Dunlop's tyres in 1889, winning the tyre's first-ever races in Ireland and then England.Hume, William (1938)
''The Golden Book of Cycling''
Archive maintained by 'The Pedal Club'.
Soon after, the rear
freewheel Freewheel mechanism In mechanical or automotive engineering, a freewheel or overrunning clutch is a device in a transmission that disengages the driveshaft from the driven shaft when the driven shaft rotates faster than the driveshaft. An ov ...
was developed, enabling the rider to coast. This refinement led to the 1890s invention of
coaster brake A bicycle brake reduces the speed of a bicycle or prevents it from moving. The three main types are: #Rim brakes, rim brakes, #Disc brakes, disc brakes, and #Drum brakes, drum brakes. Most bicycle brake systems consist of three main components: ...
s. Dérailleur gears and hand-operated
Bowden cable A Bowden cable ( ) is a type of flexible cable used to transmit mechanical force or energy by the movement of an inner cable relative to a hollow outer cable housing. The housing is generally of composite construction, consisting of an inne ...
-pull brakes were also developed during these years, but were only slowly adopted by casual riders. The
Svea Velocipede The Svea Velocipede was an early bicycle type invented in the 19th century by the Swedish brothers Fredrik Ljungström and Birger Ljungström. The bicycle employed the today well-established bicycle frame but the drive of the wheel worked accord ...
with vertical pedal arrangement and
locking hubs Locking hubs, also known as free wheeling hubs are fitted to some (mainly older) four-wheel drive vehicles, allowing the front wheels to rotate freely when disconnected (unlocked) from the front axle. This is done to reduce the mechanical resist ...
was introduced in 1892 by the Swedish engineers
Fredrik Ljungström Fredrik Ljungström (16 June 1875 – 18 February 1964) was a Swedish engineer, technical designer, and industrialist. Considered one of the foremost inventors of Sweden, Fredrik Ljungström accounted for hundreds of technical patents alon ...
and
Birger Ljungström Birger Ljungström (4 June 1872 – 17 November 1948) was a Swedish engineer, technical designer, industrialist, and inventor. Biography Birger Ljungström was born at Uddevalla in Stockholm, Sweden to cartographer Jonas Patrik Ljun ...
. It attracted attention at the
World Fair A world's fair, also known as a universal exhibition or an expo, is a large international exhibition designed to showcase the achievements of nations. These exhibitions vary in character and are held in different parts of the world at a specif ...
and was produced in a few thousand units. In the 1870s many
cycling club A cycling club is a society for cyclists. Clubs tend to be mostly local, and can be general or specialised. In the United Kingdom, for example, the Cyclists' Touring Club, (CTC) is a national cycling association; the Tricycle Association, Tandem ...
s flourished. They were popular in a time when there were not cars on the market and the principal mode of transportation was
horse-drawn vehicle A horse-drawn vehicle is a mechanized piece of equipment pulled by one horse or by a team of horses. These vehicles typically had two or four wheels and were used to carry passengers and/or a load. They were once common worldwide, but they have m ...
s, such the
horse and buggy ] A horse and buggy (in American English) or horse and carriage (in British English and American English) refers to a light, simple, two-person carriage of the late 18th, 19th and early 20th centuries, drawn usually by one or sometimes by two ho ...
or the
horsecar A horsecar, horse-drawn tram, horse-drawn streetcar (U.S.), or horse-drawn railway (historical), is an animal-powered (usually horse) tram or streetcar. Summary The horse-drawn tram (horsecar) was an early form of public rail transport, wh ...
. Among the earliest clubs was The Bicycle Touring Club, which has operated since 1878. By the turn of the century, cycling clubs flourished on both sides of the Atlantic, and touring and racing became widely popular. The
Raleigh Bicycle Company The Raleigh Bicycle Company is a British bicycle manufacturer based in Nottingham, England and founded by Woodhead and Angois in 1885. Using Raleigh as their brand name, it is one of the oldest bicycle companies in the world. After being acqui ...
was founded in Nottingham, England in 1888. It became the biggest bicycle manufacturing company in the world, making over two million bikes per year. Bicycles and horse buggies were the two mainstays of private transportation just prior to the automobile, and the grading of smooth roads in the late 19th century was stimulated by the widespread advertising, production, and use of these devices. More than 1 billion bicycles have been manufactured worldwide as of the early 21st century. Bicycles are the most common vehicle of any kind in the world, and the most numerous model of any kind of vehicle, whether human-powered or
motor vehicle A motor vehicle, also known as motorized vehicle or automotive vehicle, is a self-propelled land vehicle, commonly wheeled, that does not operate on Track (rail transport), rails (such as trains or trams) and is used for the transportation of pe ...
, is the Chinese
Flying Pigeon Flying Pigeon () is a Chinese publicly owned bicycle company based in Tianjin. Since 1950, more than 500 million Flying Pigeon PA-02 bicycles have been made, and as of 2007, more than any other model of vehicle. The next closest vehicle mode ...
, with numbers exceeding 500 million. The next most numerous vehicle, the
Honda Super Cub The Honda Super Cub or Honda Cub is a Honda underbone motorcycle with a four-stroke single-cylinder engine ranging in displacement from . In continuous manufacture since 1958 with production surpassing 60 million in 2008, 87 million in 2014, an ...
motorcycle, has more than 100 million units made, while most produced car, the
Toyota Corolla The is a series of compact cars (formerly subcompact) manufactured and marketed globally by the Toyota Motor Corporation. Introduced in 1966, the Corolla was the best-selling car worldwide by 1974 and has been one of the best-selling cars in ...
, has reached 44 million and counting. File:Women on bicycles, late 19th Century USA.jpg, Women on bicycles on unpaved road, US, late 19th century File:Ordinary bicycle01.jpg, A ''
penny-farthing The penny-farthing, also known as a high wheel, high wheeler or ordinary, is an early type of bicycle. It was popular in the 1870s and 1880s, with its large front wheel providing high speeds (owing to its travelling a large distance for every r ...
'' or ''ordinary bicycle'' photographed in the
Škoda Auto Škoda Auto a.s. (), often shortened to Škoda, is a Czech automobile manufacturer established in 1925 as the successor to Laurin & Klement and headquartered in Mladá Boleslav, Czech Republic. Škoda Works became state owned in 1948. After 199 ...
museum in the Czech Republic File:Svea Velocipede.jpg, The
Svea Velocipede The Svea Velocipede was an early bicycle type invented in the 19th century by the Swedish brothers Fredrik Ljungström and Birger Ljungström. The bicycle employed the today well-established bicycle frame but the drive of the wheel worked accord ...
by
Fredrik Ljungström Fredrik Ljungström (16 June 1875 – 18 February 1964) was a Swedish engineer, technical designer, and industrialist. Considered one of the foremost inventors of Sweden, Fredrik Ljungström accounted for hundreds of technical patents alon ...
and
Birger Ljungström Birger Ljungström (4 June 1872 – 17 November 1948) was a Swedish engineer, technical designer, industrialist, and inventor. Biography Birger Ljungström was born at Uddevalla in Stockholm, Sweden to cartographer Jonas Patrik Ljun ...
, exhibited at the
Swedish National Museum of Science and Technology The Swedish National Museum of Science and Technology ( sv, Tekniska museet) is a Swedish museum in Stockholm. It is Sweden’s largest museum of technology, and has a national charter to be responsible for preserving the Swedish cultural herita ...
File:BicyclePlymouth.jpg, Bicycle in
Plymouth Plymouth () is a port city and unitary authority in South West England. It is located on the south coast of Devon, approximately south-west of Exeter and south-west of London. It is bordered by Cornwall to the west and south-west. Plymouth ...
, England, at the start of the 20th century File:Antônio, Luís and Pedro.jpg, Brazilian princes (from left) Antônio, Luís, and
Pedro Pedro is a masculine given name. Pedro is the Spanish, Portuguese, and Galician name for ''Peter''. Its French equivalent is Pierre while its English and Germanic form is Peter. The counterpart patronymic surname of the name Pedro, meaning ...
riding a triple tandem bicycle during their exile, 1891 File:Man with bicycle (I0002502).tiff, Man with a bicycle in Glengarry County, Ontario between 1895 and 1910 File:The first bicycle.png, The first bicycle File:The London Hansom Cycle 1896.png, Drawing from an 1896 newspaper of The London Hansom Cycle File:Draisine or Laufmaschine, around 1820. Archetype of the Bicycle. Pic 01.jpg, Wooden ''
draisine A draisine () is a light auxiliary rail vehicle, driven by service personnel, equipped to transport crew and material necessary for the maintenance of railway infrastructure. The eponymous term is derived from the German inventor Baron Karl Dr ...
'' (around 1820), the first two-wheeler and as such the archetype of the bicycle File:Michauxjun.jpg, upright=0.9, left, Michaux's son on a velocipede 1868 File:Old CTC sign.jpg,
Cyclists' Touring Club Cycling UK is a trading name of the Cyclists' Touring Club (CTC), which is a charitable membership organisation supporting cyclists and promoting bicycle use. Cycling UK is registered at Companies House as "Cyclists’ Touring Club", and is cov ...
sign on display at the
National Museum of Scotland The National Museum of Scotland in Edinburgh, Scotland, was formed in 2006 with the merger of the new Museum of Scotland, with collections relating to Scottish antiquities, culture and history, and the adjacent Royal Scottish Museum (opened in ...
File:John Boyd Dunlop (c1915).jpg, upleft,
John Boyd Dunlop John Boyd Dunlop (5 February 1840 – 23 October 1921) was a Scottish-born inventor and veterinary surgeon who spent most of his career in Ireland. Familiar with making rubber devices, he invented the first practical pneumatic tyres for his c ...
on a bicycle c. 1915 File:1886 Starley 'Rover' Safety Cycle British Motor Museum 09-2016 (29928044262).jpg, 1886
Rover Rover may refer to: People * Constance Rover (1910–2005), English historian * Jolanda de Rover (born 1963), Dutch swimmer * Rover Thomas (c. 1920–1998), Indigenous Australian artist Places * Rover, Arkansas, US * Rover, Missouri, US * ...
safety bicycle A safety bicycle (or simply a safety) is a type of bicycle that became very popular beginning in the late 1880s as an alternative to the penny-farthing ("ordinary") and is now the most common type of bicycle. Early bicycles of this style were kno ...
at the
British Motor Museum The British Motor Museum in Warwickshire, England holds the world's largest collection of historic British cars, with over 300 cars on display from the British Motor Industry Heritage Trust and the Jaguar Heritage Trust. History The creation o ...
. The first modern bicycle, it featured a rear-wheel-drive,
chain-drive Chain drive is a way of Transmission (mechanics), transmitting mechanical power from one place to another. It is often used to convey power to the wheels of a vehicle, particularly bicycles and motorcycles. It is also used in a wide variety of ma ...
n cycle with two similar-sized wheels. Dunlop's
pneumatic tire A tire (American English) or tyre (British English) is a ring-shaped component that surrounds a wheel's rim to transfer a vehicle's load from the axle through the wheel to the ground and to provide traction on the surface over which ...
was added to the bicycle in 1888.


Uses

From the beginning, bicycles have been and continue to be employed for many uses. In a utilitarian way, bicycles are used for transportation,
bicycle commuting Bicycle commuting is the use of a bicycle to travel from home to a place of work or study — in contrast to the use of a bicycle for sport, recreation or touring. Commuting especially lends itself to areas with relatively flat terrain and ar ...
, and
utility cycling Utility cycling encompasses any cycling done simply as a means of transport rather than as a sport or leisure activity. It is the original and most common type of cycling in the world. Cycling mobility is one of the various types of private t ...
. It can be used as a 'work horse' by
mail carriers The mail or post is a system for physically transporting postcards, letter (message), letters, and parcel (package), parcels. A postal service can be private or public, though many governments place restrictions on private systems. Since the mid ...
,
paramedic A paramedic is a registered healthcare professional who works autonomously across a range of health and care settings and may specialise in clinical practice, as well as in education, leadership, and research. Not all ambulance personnel are p ...
s,
police The police are a constituted body of persons empowered by a state, with the aim to enforce the law, to ensure the safety, health and possessions of citizens, and to prevent crime and civil disorder. Their lawful powers include arrest and t ...
, messengers, and
general delivery ''Poste restante'' (, "remainder post"), also known as general delivery in North American English, is a service where the post office holds the mail until the recipient calls for it. It is a common destination for mail for people who are visiting ...
services. Military uses of bicycles include
communications Communication (from la, communicare, meaning "to share" or "to be in relation with") is usually defined as the transmission of information. The term may also refer to the message communicated through such transmissions or the field of inquir ...
,
reconnaissance In military operations, reconnaissance or scouting is the exploration of an area by military forces to obtain information about enemy forces, terrain, and other activities. Examples of reconnaissance include patrolling by troops (skirmisher ...
, troop movement, supply of provisions, and patrol. See also:
bicycle infantry Bicycle infantry are infantry soldiers who maneuver on (or, more often, between) battlefields using military bicycles. The term dates from the late 19th century, when the "safety bicycle" became popular in Europe, the United States, and Austra ...
. The bicycle is also used for recreational purposes, such as
bicycle touring Bicycle touring is the taking of self-contained cycling trips for pleasure, adventure or autonomy rather than sport, commuting or exercise. Bicycle touring can range from single-day trips to extended travels spanning weeks or months. Tours may be ...
,
mountain biking Mountain biking is a sport of riding bicycles off-road, often over rough terrain, usually using specially designed mountain bikes. Mountain bikes share similarities with other bikes but incorporate features designed to enhance durability and pe ...
,
physical fitness Physical fitness is a state of health and well-being and, more specifically, the ability to perform aspects of Outline of sports, sports, occupations and daily activities. Physical fitness is generally achieved through proper nutrition, moderate ...
, and
play Play most commonly refers to: * Play (activity), an activity done for enjoyment * Play (theatre), a work of drama Play may refer also to: Computers and technology * Google Play, a digital content service * Play Framework, a Java framework * Pla ...
. Bicycle competition includes
racing In sport, racing is a competition of speed, in which competitors try to complete a given task in the shortest amount of time. Typically this involves traversing some distance, but it can be any other task involving speed to reach a specific goa ...
,
BMX racing BMX racing is a type of off-road bicycle racing. The format of BMX was derived from motocross racing. BMX bicycle racing, races are sprint races on purpose-built off-road single-lap race tracks. The track usually consists of a starting gate for u ...
,
track racing Track racing is a form of motorcycle racing where teams or individuals race opponents around an unpaved oval track. There are differing variants, with each variant racing on a different surface type. The most common variant is Speedway which has ...
,
criterium A criterium, or crit, is a bike race consisting of several laps around a closed circuit, the length of each lap or circuit ranging from about 400 m to 10,000 m. Overview Race length can be determined by a number of laps or total time ...
, roller racing, sportives and
time trial In many racing sports, an athlete (or occasionally a team of athletes) will compete in a time trial against the clock to secure the fastest time. The format of a time trial can vary, but usually follow a format where each athlete or team sets off at ...
s. Major multi-stage professional events are the Giro d'Italia, the
Tour de France The Tour de France () is an annual men's multiple-stage bicycle race primarily held in France, while also occasionally passing through nearby countries. Like the other Grand Tours (the Giro d'Italia and the Vuelta a España), it consists ...
, the
Vuelta a España The Vuelta a España (; en, Tour of Spain) is an annual multi-stage bicycle race primarily held in Spain, while also occasionally making passes through nearby countries. Inspired by the success of the Tour de France and the Giro d'Italia, the r ...
, the
Tour de Pologne The Tour de Pologne (Polish: ''Wyścig Dookoła Polski'', English: ''Tour of Poland'', official abbreviation TdP,) is an annual, professional men's multiple-stage bicycle race primarily held in Poland. It consists of seven or eight stages ...
, and the
Volta a Portugal The Volta a Portugal ( en, Tour of Portugal), also known as Volta a Portugal em Bicicleta ( en, Tour of Portugal on Bicycle), is an annual multi-stage road bicycle racing competition held in Portugal. The competition takes place during a two-week s ...
. Bikes can be used for entertainment and pleasure, such as in organised mass rides,
artistic cycling Artistic cycling is a form of competitive indoor cycling in which athletes perform tricks (called exercises) for points on specialized, fixed-gear bikes in a format similar to ballet or gymnastics. The exercises are performed in front of judge ...
and
freestyle BMX Freestyle BMX is bicycle motocross stunt riding on BMX bikes. It is an extreme sport descended from BMX racing that consists of five disciplines: street, park, vert, trails, and flatland. In June 2017, the International Olympic Committee announced t ...
.


Technical aspects

The bicycle has undergone continual adaptation and improvement since its inception. These innovations have continued with the advent of modern materials and computer-aided design, allowing for a proliferation of specialized bicycle types, improved
bicycle safety Bicycle safety is the use of road traffic safety practices to reduce risk associated with cycling. Risk can be defined as the number of incidents occurring for a given amount of cycling. Some of this subject matter is hotly debated: for example ...
, and riding comfort.


Types

Bicycles can be categorized in many different ways: by function, by number of riders, by general construction, by gearing or by means of propulsion. The more common types include
utility bicycle A utility bicycle, city bicycle, urban bicycle, European city bike (ECB), Dutch bike, classic bike or simply city-bike, is a bicycle designed for frequent very short, very slow rides through very flat urban areas. It is a form of utility bicycle ...
s,
mountain bicycle A mountain bike (MTB) or mountain bicycle is a bicycle designed for off-road cycling. Mountain bikes share some similarities with other bicycles, but incorporate features designed to enhance durability and performance in rough terrain, which m ...
s,
racing bicycle A racing bicycle, also known as a road bike is a bicycle designed for competitive road cycling, a sport governed by and according to the rules of the Union Cycliste Internationale (UCI). Racing bicycles are designed for maximum performance ...
s,
touring bicycle A touring bicycle is a bicycle designed or modified to handle bicycle touring. To make the bikes sufficiently robust, comfortable and capable of carrying heavy loads, special features may include a long wheelbase (for ride comfort and to avoid pe ...
s,
hybrid bicycle Hybrid bicycles blend characteristics from more specialized road bikes, touring bikes and mountain bikes. The resulting "hybrid" is a general-purpose bike that can tolerate a wide range of riding conditions and applications. Their stability, comf ...
s,
cruiser bicycle A cruiser bicycle, also known as a beach cruiser or (formerly) motobike, is a bicycle that usually combines balloon tires, an upright seating posture, a single-speed drivetrain, and straightforward steel construction with expressive styling. ...
s, and
BMX bike A BMX bike is an off-road sport bicycle used for racing or stunt riding. BMX mean''s bicycle'' ''motocross''. Construction Though originally denoting a bicycle intended for BMX racing, the term "BMX bike" is now used as a generic term to e ...
s. Less common are tandems, low riders,
tall bike A tall bike is an unusually tall bicycle often constructed by hobbyists from spare parts. Typically, two conventional bicycle frames are connected, by welding, brazing, or other means, one atop the other. The drive train is reconfigured to connec ...
s,
fixed gear A fixed-gear bicycle (or fixed-wheel bicycle, commonly known in some places as a fixie) is a bicycle that has a Bicycle drivetrain systems, drivetrain with no freewheel mechanism. The freewheel was developed early in the history of bicycle des ...
, folding models,
amphibious bicycles An amphibious cycle is a human-powered vehicle capable of operation on both land and water. The design which has received the most coverage is "Saidullah’s Bicycle." The bike uses four rectangular air filled floats for buoyancy which propelled ...
,
cargo bike A cargo bike (also known as a box bike, carrier cycle, freight bicycle, cycletruck, or freight tricycle) is a human powered vehicle designed and constructed specifically for transporting loads. Cargo bike designs include a cargo area consisting o ...
s,
recumbents A recumbent bicycle is a bicycle that places the rider in a laid-back reclining position. Most recumbent riders choose this type of design for ergonomic reasons: the rider's weight is distributed comfortably over a larger area, supported by ba ...
and
electric bicycles An electric bicycle (e-bike, eBike, etc.) is a motorized bicycle with an integrated electric motor used to assist propulsion. Many kinds of e-bikes are available worldwide, but they generally fall into two broad categories: bikes that assist ...
.
Unicycle A unicycle is a vehicle that touches the ground with only one wheel. The most common variation has a bicycle frame, frame with a bicycle saddle, saddle, and has a human-powered vehicle, pedal-driven direct-drive mechanism, direct-drive. A two spee ...
s,
tricycle A tricycle, sometimes abbreviated to trike, is a human-powered (or gasoline or electric motor powered or assisted, or gravity powered) three-wheeled vehicle. Some tricycles, such as cycle rickshaws (for passenger transport) and freight trikes, ...
s and
quadracycles A quadracycle is a four-wheeled human-powered land vehicle. It is also referred to as a quadricycle, quadcycle, pedal car or four-wheeled bicycle amongst other terms. Quadracycles have been in use since 1853 and have grown into several famil ...
are not strictly bicycles, as they have respectively one, three and four wheels, but are often referred to informally as "bikes" or "cycles".


Dynamics

A bicycle stays upright while moving forward by being steered so as to keep its
center of mass In physics, the center of mass of a distribution of mass in space (sometimes referred to as the balance point) is the unique point where the weighted relative position of the distributed mass sums to zero. This is the point to which a force may ...
over the wheels. This steering is usually provided by the rider, but under certain conditions may be provided by the bicycle itself. The combined center of mass of a bicycle and its rider must lean into a turn to successfully navigate it. This lean is induced by a method known as
countersteering Countersteering is used by single-track vehicle operators, such as cyclists and motorcyclists, to initiate a turn toward a given direction by momentarily steering counter to the desired direction ("steer left to turn right"). To negotiate a turn s ...
, which can be performed by the rider turning the handlebars directly with the hands or indirectly by leaning the bicycle. Short-wheelbase or tall bicycles, when braking, can generate enough stopping force at the front wheel to flip longitudinally. The act of purposefully using this force to lift the rear wheel and balance on the front without tipping over is a trick known as a
stoppie The stoppie is a motorcycle and bicycle trick in which the back wheel is lifted by abruptly applying the front brake, then, by carefully reducing the brake pressure, the bike is ridden for a short distance on the front wheel. It is also called an ...
, endo, or front wheelie.


Performance

The bicycle is extraordinarily efficient in both biological and mechanical terms. The bicycle is the most efficient human-powered means of transportation in terms of energy a person must expend to travel a given distance. From a mechanical viewpoint, up to 99% of the energy delivered by the rider into the pedals is transmitted to the wheels, although the use of gearing mechanisms may reduce this by 10–15%. In terms of the ratio of cargo weight a bicycle can carry to total weight, it is also an efficient means of cargo transportation. A human traveling on a bicycle at low to medium speeds of around uses only the power required to walk. Air drag, which is proportional to the square of speed, requires dramatically higher power outputs as speeds increase. If the rider is sitting upright, the rider's body creates about 75% of the total drag of the bicycle/rider combination. Drag can be reduced by seating the rider in a more
aerodynamic Aerodynamics, from grc, ἀήρ ''aero'' (air) + grc, δυναμική (dynamics), is the study of the motion of air, particularly when affected by a solid object, such as an airplane wing. It involves topics covered in the field of fluid dyn ...
ally streamlined position. Drag can also be reduced by covering the bicycle with an aerodynamic fairing. The fastest recorded unpaced speed on a flat surface is . In addition, the
carbon dioxide Carbon dioxide (chemical formula ) is a chemical compound made up of molecules that each have one carbon atom covalently double bonded to two oxygen atoms. It is found in the gas state at room temperature. In the air, carbon dioxide is transpar ...
generated in the production and transportation of the food required by the bicyclist, per mile traveled, is less than that generated by energy efficient motorcars. Image:Corsa bacchetta.jpg, A
recumbent bicycle A recumbent bicycle is a bicycle that places the rider in a laid-back reclining position. Most recumbent riders choose this type of design for ergonomic reasons: the rider's weight is distributed comfortably over a larger area, supported by ba ...
File:Wooden bicycle for young child.jpg,
Balance bicycle A balance bicycle, run bike or no pedal bike or dandy horse is a training bicycle that helps children learn balance and steering. It has no foot pedals, no drivetrain, no chain, no gears, no gear shifters, no derailleurs, and no freewheel. Desi ...
for young children


Parts


Frame

The great majority of modern bicycles have a frame with upright seating that looks much like the first chain-driven bike. These upright bicycles almost always feature the ''diamond frame'', a
truss A truss is an assembly of ''members'' such as beams, connected by ''nodes'', that creates a rigid structure. In engineering, a truss is a structure that "consists of two-force members only, where the members are organized so that the assembl ...
consisting of two triangles: the front triangle and the rear triangle. The front triangle consists of the head tube, top tube, down tube, and seat tube. The head tube contains the headset, the set of bearings that allows the
fork In cutlery or kitchenware, a fork (from la, furca 'pitchfork') is a utensil, now usually made of metal, whose long handle terminates in a head that branches into several narrow and often slightly curved tines with which one can spear foods ei ...
to turn smoothly for steering and balance. The top tube connects the head tube to the seat tube at the top, and the down tube connects the head tube to the
bottom bracket The bottom bracket on a bicycle connects the crankset (chainset) to the bicycle and allows the crankset to rotate freely. It contains a spindle to which the crankset attaches, and the bearings that allow the spindle and crankset to rotate. The ch ...
. The rear triangle consists of the seat tube and paired chain stays and seat stays. The chain stays run parallel to the
chain A chain is a serial assembly of connected pieces, called links, typically made of metal, with an overall character similar to that of a rope in that it is flexible and curved in compression but linear, rigid, and load-bearing in tension. A c ...
, connecting the bottom bracket to the rear dropout, where the axle for the rear wheel is held. The seat stays connect the top of the seat tube (at or near the same point as the top tube) to the rear fork ends. Historically, women's bicycle frames had a top tube that connected in the middle of the seat tube instead of the top, resulting in a lower standover height at the expense of compromised structural integrity, since this places a strong bending load in the seat tube, and bicycle frame members are typically weak in bending. This design, referred to as a ''
step-through frame A step-through frame (also known as open frame, drop frame, or low-step frame) is a type of bicycle frame, often used for utility bicycles, with a low or absent top tube or cross-bar. Traditionally, bicycles with a step-through frame were known ...
'' or as an ''open frame'', allows the rider to mount and dismount in a dignified way while wearing a skirt or dress. While some women's bicycles continue to use this frame style, there is also a variation, the ''
mixte A step-through frame (also known as open frame, drop frame, or low-step frame) is a type of bicycle frame, often used for utility bicycles, with a low or absent top tube or cross-bar. Traditionally, bicycles with a step-through frame were known ...
'', which splits the top tube laterally into two thinner top tubes that bypass the seat tube on each side and connect to the rear fork ends. The ease of stepping through is also appreciated by those with limited flexibility or other joint problems. Because of its persistent image as a "women's" bicycle, step-through frames are not common for larger frames. Step-throughs were popular partly for practical reasons and partly for social mores of the day. For most of the history of bicycles' popularity women have worn long skirts, and the lower frame accommodated these better than the top-tube. Furthermore, it was considered "unladylike" for women to open their legs to mount and dismount—in more conservative times women who rode bicycles at all were vilified as immoral or immodest. These practices were akin to the older practice of riding horse
sidesaddle Sidesaddle riding is a form of equestrianism that uses a type of saddle which allows female riders to sit aside rather than astride an equine. Sitting aside dates back to Ancient history, antiquity and developed in European countries in the Middl ...
. Another style is the
recumbent bicycle A recumbent bicycle is a bicycle that places the rider in a laid-back reclining position. Most recumbent riders choose this type of design for ergonomic reasons: the rider's weight is distributed comfortably over a larger area, supported by ba ...
. These are inherently more aerodynamic than upright versions, as the rider may lean back onto a support and operate pedals that are on about the same level as the seat. The world's fastest bicycle is a recumbent bicycle but this type was banned from competition in 1934 by the
Union Cycliste Internationale The ''Union Cycliste Internationale'' (UCI; ; en, International Cycling Union) is the world governing body for sports cycling and oversees international competitive cycling events. The UCI is based in Aigle, Switzerland. The UCI issues racing ...
. Historically, materials used in bicycles have followed a similar pattern as in aircraft, the goal being high strength and low weight. Since the late 1930s alloy steels have been used for frame and fork tubes in higher quality machines. By the 1980s
aluminum Aluminium (aluminum in American and Canadian English) is a chemical element with the symbol Al and atomic number 13. Aluminium has a density lower than those of other common metals, at approximately one third that of steel. It has ...
welding Welding is a fabrication (metal), fabrication process that joins materials, usually metals or thermoplastics, by using high heat to melt the parts together and allowing them to cool, causing Fusion welding, fusion. Welding is distinct from lower ...
techniques had improved to the point that aluminum tube could safely be used in place of
steel Steel is an alloy made up of iron with added carbon to improve its strength and fracture resistance compared to other forms of iron. Many other elements may be present or added. Stainless steels that are corrosion- and oxidation-resistant ty ...
. Since then aluminum alloy frames and other components have become popular due to their light weight, and most mid-range bikes are now principally aluminum alloy of some kind. More expensive bikes use
carbon fibre Carbon fiber-reinforced polymers (American English), carbon-fibre-reinforced polymers (Commonwealth English), carbon-fiber-reinforced plastics, carbon-fiber reinforced-thermoplastic (CFRP, CRP, CFRTP), also known as carbon fiber, carbon compo ...
due to its significantly lighter weight and profiling ability, allowing designers to make a bike both stiff and compliant by manipulating the lay-up. Virtually all professional racing bicycles now use carbon fibre frames, as they have the best strength to weight ratio. A typical modern carbon fiber frame can weighs less than . Other exotic frame materials include
titanium Titanium is a chemical element with the symbol Ti and atomic number 22. Found in nature only as an oxide, it can be reduced to produce a lustrous transition metal with a silver color, low density, and high strength, resistant to corrosion in ...
and advanced alloys.
Bamboo Bamboos are a diverse group of evergreen perennial flowering plants making up the subfamily Bambusoideae of the grass family Poaceae. Giant bamboos are the largest members of the grass family. The origin of the word "bamboo" is uncertain, bu ...
, a natural
composite material A composite material (also called a composition material or shortened to composite, which is the common name) is a material which is produced from two or more constituent materials. These constituent materials have notably dissimilar chemical or ...
with high strength-to-weight ratio and
stiffness Stiffness is the extent to which an object resists deformation in response to an applied force. The complementary concept is flexibility or pliability: the more flexible an object is, the less stiff it is. Calculations The stiffness, k, of a b ...
has been used for bicycles since 1894. Recent versions use bamboo for the primary frame with glued metal connections and parts, priced as exotic models. File:Bicycle diagram-en.svg, Diagram of a bicycle File:Triumph Bicycle.JPG, A
Triumph The Roman triumph (Latin triumphus) was a celebration for a victorious military commander in ancient Rome. For later imitations, in life or in art, see Trionfo. Numerous later uses of the term, up to the present, are derived directly or indirectl ...
with a
step-through frame A step-through frame (also known as open frame, drop frame, or low-step frame) is a type of bicycle frame, often used for utility bicycles, with a low or absent top tube or cross-bar. Traditionally, bicycles with a step-through frame were known ...
File:Trek Y Foil.jpg, A carbon fiber Trek Y-Foil from the late 1990s


Drivetrain and gearing

The ''drivetrain'' begins with pedals which rotate the cranks, which are held in axis by the bottom bracket. Most bicycles use a chain to transmit power to the rear wheel. A very small number of bicycles use a shaft drive to transmit power, or special belts. Hydraulic bicycle transmissions have been built, but they are currently inefficient and complex. Since cyclists' legs are most efficient over a narrow range of pedaling speeds, or
cadence In Western musical theory, a cadence (Latin ''cadentia'', "a falling") is the end of a phrase in which the melody or harmony creates a sense of full or partial resolution, especially in music of the 16th century onwards.Don Michael Randel (1999) ...
, a variable
gear ratio A gear train is a mechanical system formed by mounting gears on a frame so the teeth of the gears engage. Gear teeth are designed to ensure the pitch circles of engaging gears roll on each other without slipping, providing a smooth transmission ...
helps a cyclist to maintain an optimum pedalling speed while covering varied terrain. Some, mainly utility, bicycles use
hub gear A hub gear, internal-gear hub, internally geared hub or just gear hub is a gear ratio changing system commonly used on bicycles that is implemented with planetary or epicyclic gears. The gears and lubricants are sealed within the shell of the h ...
s with between 3 and 14 ratios, but most use the generally more efficient dérailleur system, by which the chain is moved between different cogs called chainrings and sprockets to select a ratio. A dérailleur system normally has two dérailleurs, or mechs, one at the front to select the
chainring The crankset (in the US) or chainset (in the UK), is the component of a bicycle drivetrain that converts the reciprocating motion of the rider's legs into rotational motion used to drive the chain or belt, which in turn drives the rear whee ...
and another at the back to select the sprocket. Most bikes have two or three chainrings, and from 5 to 11 sprockets on the back, with the number of theoretical gears calculated by multiplying front by back. In reality, many gears overlap or require the chain to run diagonally, so the number of usable gears is fewer. An alternative to chaindrive is to use a synchronous belt. These are toothed and work much the same as a chain—popular with commuters and long distance cyclists they require little maintenance. They can't be shifted across a cassette of sprockets, and are used either as single speed or with a hub gear. Different gears and ranges of gears are appropriate for different people and styles of cycling. Multi-speed bicycles allow gear selection to suit the circumstances: a cyclist could use a high gear when cycling downhill, a medium gear when cycling on a flat road, and a low gear when cycling uphill. In a lower gear every turn of the pedals leads to fewer rotations of the rear wheel. This allows the energy required to move the same distance to be distributed over more pedal turns, reducing fatigue when riding uphill, with a heavy load, or against strong winds. A higher gear allows a cyclist to make fewer pedal turns to maintain a given speed, but with more effort per turn of the pedals. With a ''chain drive'' transmission, a ''chainring'' attached to a crank drives the chain, which in turn rotates the rear wheel via the rear sprocket(s) (
cassette Cassette may refer to: Technology * Cassette tape (or ''musicassette'', ''audio cassette'', ''cassette tape'', or ''tape''), a worldwide standard for analog audio recording and playback ** Cassette single (or "Cassingle"), a music single in the ...
or
freewheel Freewheel mechanism In mechanical or automotive engineering, a freewheel or overrunning clutch is a device in a transmission that disengages the driveshaft from the driven shaft when the driven shaft rotates faster than the driveshaft. An ov ...
). There are four gearing options: two-speed hub gear integrated with chain ring, up to 3 chain rings, up to 11 sprockets, hub gear built into rear wheel (3-speed to 14-speed). The most common options are either a rear hub or multiple chain rings combined with multiple sprockets (other combinations of options are possible but less common). File:Dsb-1.jpg, A bicycle with shaft drive instead of a chain File:Shimano xt rear derailleur.jpg, A set of rear sprockets (also known as a cassette) and a
derailleur Shimano 600 front derailleur (1980) A derailleur is a variable-ratio bicycle gearing system consisting of a chain, multiple sprockets of different sizes, and a mechanism to move the chain from one sprocket to another. Modern front and rear d ...
File:Hub gear.jpg, upHub gear


Steering

The handlebars connect to the
stem Stem or STEM may refer to: Plant structures * Plant stem, a plant's aboveground axis, made of vascular tissue, off which leaves and flowers hang * Stipe (botany), a stalk to support some other structure * Stipe (mycology), the stem of a mushro ...
that connects to the fork that connects to the front wheel, and the whole assembly connects to the bike and rotates about the steering axis via the headset bearings. Three styles of handlebar are common. ''Upright handlebars'', the norm in Europe and elsewhere until the 1970s, curve gently back toward the rider, offering a natural grip and comfortable upright position. ''Drop handlebars'' "drop" as they curve forward and down, offering the cyclist best braking power from a more aerodynamic "crouched" position, as well as more upright positions in which the hands grip the brake lever mounts, the forward curves, or the upper flat sections for increasingly upright postures. Mountain bikes generally feature a 'straight handlebar' or 'riser bar' with varying degrees of sweep backwards and centimeters rise upwards, as well as wider widths which can provide better handling due to increased leverage against the wheel.


Seating

Saddles also vary with rider preference, from the cushioned ones favored by short-distance riders to narrower saddles which allow more room for leg swings. Comfort depends on riding position. With comfort bikes and hybrids, cyclists sit high over the seat, their weight directed down onto the saddle, such that a wider and more cushioned saddle is preferable. For racing bikes where the rider is bent over, weight is more evenly distributed between the handlebars and saddle, the hips are flexed, and a narrower and harder saddle is more efficient. Differing saddle designs exist for male and female cyclists, accommodating the genders' differing anatomies and sit bone width measurements, although bikes typically are sold with saddles most appropriate for men. Suspension seat posts and seat springs provide comfort by absorbing shock but can add to the overall weight of the bicycle. A recumbent bicycle has a reclined chair-like seat that some riders find more comfortable than a saddle, especially riders who suffer from certain types of seat, back, neck, shoulder, or wrist pain. Recumbent bicycles may have either under-seat or over-seat
steering Steering is a system of components, linkages, and other parts that allows a driver to control the direction of the vehicle. Introduction The most conventional steering arrangement allows a driver to turn the front wheels of a vehicle using ...
.


Brakes

Bicycle brakes may be rim brakes, in which friction pads are compressed against the wheel rims; hub brakes, where the mechanism is contained within the wheel hub, or disc brakes, where pads act on a rotor attached to the hub. Most road bicycles use rim brakes, but some use disk brakes.
Disc brakes A disc brake is a type of brake that uses the calipers to squeeze pairs of pads against a disc or a "rotor" to create friction. This action slows the rotation of a shaft, such as a vehicle axle, either to reduce its rotational speed or to hol ...
are more common for mountain bikes, tandems and recumbent bicycles than on other types of bicycles, due to their increased power, coupled with an increased weight and complexity. With hand-operated brakes, force is applied to brake levers mounted on the handlebars and transmitted via Bowden cables or
hydraulic Hydraulics (from Greek: Υδραυλική) is a technology and applied science using engineering, chemistry, and other sciences involving the mechanical properties and use of liquids. At a very basic level, hydraulics is the liquid counter ...
lines to the friction pads, which apply pressure to the braking surface, causing friction which slows the bicycle down. A rear hub brake may be either hand-operated or pedal-actuated, as in the back pedal ''coaster brakes'' which were popular in North America until the 1960s.
Track bicycle A track bicycle or track bike is a bicycle optimized for racing at a velodrome or outdoor track. Unlike road bicycles, the track bike is a fixed-gear bicycle; thus, it has only a single gear ratio and has neither a freewheel nor brakes. Tires are ...
s do not have brakes, because all riders ride in the same direction around a track which does not necessitate sharp deceleration. Track riders are still able to slow down because all track bicycles are fixed-gear, meaning that there is no freewheel. Without a freewheel, coasting is impossible, so when the rear wheel is moving, the cranks are moving. To slow down, the rider applies resistance to the pedals, acting as a braking system which can be as effective as a conventional rear wheel brake, but not as effective as a front wheel brake.


Suspension

Bicycle suspension refers to the system or systems used to ''suspend'' the rider and all or part of the bicycle. This serves two purposes: to keep the wheels in continuous contact with the ground, improving control, and to isolate the rider and luggage from jarring due to rough surfaces, improving comfort. Bicycle suspensions are used primarily on mountain bicycles, but are also common on hybrid bicycles, as they can help deal with problematic vibration from poor surfaces. Suspension is especially important on recumbent bicycles, since while an upright bicycle rider can stand on the pedals to achieve some of the benefits of suspension, a recumbent rider cannot. Basic mountain bicycles and hybrids usually have front suspension only, whilst more sophisticated ones also have rear suspension. Road bicycles tend to have no suspension.


Wheels and tires

The wheel axle fits into fork ends in the frame and fork. A pair of wheels may be called a wheelset, especially in the context of ready-built "off the shelf", performance-oriented wheels. Tires vary enormously depending on their intended purpose.
Road bicycles The term road bicycle is used to describe bicycles built for traveling at speed on paved roads. Some sources use the term to mean racing bicycle. Other sources specifically exclude racing bicycles from the definition, using the term to mean a ...
use tires 18 to 25 millimeters wide, most often completely smooth, or slick, and inflated to high pressure to roll fast on smooth surfaces. Off-road tires are usually between wide, and have treads for gripping in muddy conditions or metal studs for ice.


Groupset

Groupset A groupset or gruppo (from the Italian for "group", sometimes misspelled grouppo) is a bicycle component manufacturer's organized collection of mechanical parts. It generally refers to all of the components that make up a bicycle excluding the bicy ...
generally refers to all of the components that make up a bicycle excluding the bicycle frame, fork, stem, wheels, tires, and rider contact points, such as the saddle and handlebars.


Accessories

Some components, which are often optional accessories on sports bicycles, are standard features on utility bicycles to enhance their usefulness, comfort, safety and visibility. Fenders with spoilers (mudflaps) protect the cyclist and moving parts from spray when riding through wet areas. In some countries (e.g. Germany, UK), fenders are called
mudguard A mudflap or mud guard is used in combination with the vehicle fender to protect the vehicle, passengers, other vehicles, and pedestrians from mud and other flying debris thrown into the air by the rotating tire. A mudflap is typically made fro ...
s. The
chainguard A gear case, also known as a chain case or chainguard, is an enclosure for the bicycle chain and sprocket assemblages commonly employed by utility bicycles. It serves to protect the cyclist from being soiled or trapped in the Crankset#chain ring, ...
s protect clothes from oil on the chain while preventing clothing from being caught between the chain and
crankset The crankset (in the US) or chainset (in the UK), is the component of a bicycle drivetrain that converts the reciprocating motion of the rider's legs into rotational motion used to drive the chain or belt, which in turn drives the rear wheel. ...
teeth.
Kick stand A kickstand is a device on a bicycle or motorcycle that allows the bike to be kept upright without leaning against another object or the aid of a person. A kickstand is usually a piece of metal that flips down from the frame and makes contact ...
s keep bicycles upright when parked, and bike locks deter theft. Front-mounted
baskets A basket is a container that is traditionally constructed from stiff fibers and can be made from a range of materials, including wood splints, runners, and cane. While most baskets are made from plant materials, other materials such as horsehai ...
, front or rear
luggage carrier A luggage carrier, also commonly called a rack, is a device attached to a bicycle to which cargo or panniers can be attached. This is popular with utility bicycles and touring bicycles. Bicycle luggage carriers may be mounted on the front or re ...
s or racks, and
pannier A pannier is a basket, bag, box, or similar container, carried in pairs either slung over the back of a beast of burden, or attached to the sides of a bicycle or motorcycle. The term derives from a Middle English borrowing of the Old French ''p ...
s mounted above either or both wheels can be used to carry equipment or cargo. Pegs can be fastened to one, or both of the wheel hubs to either help the rider perform certain tricks, or allow a place for extra riders to stand, or rest. Parents sometimes add rear-mounted child seats, an auxiliary saddle fitted to the crossbar, or both to transport children. Bicycles can also be fitted with a hitch to tow a trailer for carrying cargo, a child, or both. Toe-clips and toestraps and
clipless pedals The pedal is the part of a bicycle that the rider pushes with their foot to propel the vehicle. It provides the connection between the cyclist's foot or shoe and the crank allowing the leg to turn the bottom bracket spindle and propel the bicyc ...
help keep the foot locked in the proper pedal position and enable cyclists to pull and push the pedals. Technical accessories include
cyclocomputer A cyclocomputer, cycle computer, cycling computer or cyclometer is a device mounted on a bicycle that calculates and displays trip information, similar to the instruments in the dashboard of a car. The computer with display, or ''head unit'', ...
s for measuring speed, distance, heart rate, GPS data etc. Other accessories include
lights Light is an electromagnetic radiation, part of which stimulates the sense of vision. Light or Lights may also refer to: Illumination * Light bulb * Traffic light Arts and entertainment Music * Lights (musician) (born 1987), Canadian singer-son ...
, reflectors, mirrors, racks, trailers, bags, water bottles and cages, and
bell A bell is a directly struck idiophone percussion instrument. Most bells have the shape of a hollow cup that when struck vibrates in a single strong strike tone, with its sides forming an efficient resonator. The strike may be made by an inter ...
. Bicycle lights, reflectors, and helmets are required by law in some geographic regions depending on the legal code. It is more common to see bicycles with bottle generators, dynamos, lights, fenders, racks and bells in Europe. Bicyclists also have specialized form fitting and high visibility clothing. Children's bicycles may be outfitted with cosmetic enhancements such as bike horns, streamers, and spoke beads.
Training wheels Training wheels (or stabilisers in British English and Hiberno-English) are an additional wheel or wheels mounted parallel to the rear wheel of a bicycle that assist learners until they have developed a usable sense of balance on the bicycle. Ty ...
are sometimes used when learning to ride.
Bicycle helmet A bicycle helmet is a type of helmet designed to attenuate impacts to the head of a cyclist in falls while minimizing side effects such as interference with peripheral vision. There is ongoing scientific research into the degree of protection ...
s can reduce injury in the event of a collision or accident, and a suitable helmet is legally required of riders in many jurisdictions. Helmets may be classified as an accessory or as an item of clothing. Bike trainers are used to enable cyclists to cycle while the bike remains stationary. They are frequently used to warm up before races or indoors when riding conditions are unfavorable.


Standards

A number of formal and industry standards exist for bicycle components to help make spare parts exchangeable and to maintain a minimum product safety. The
International Organization for Standardization The International Organization for Standardization (ISO ) is an international standard development organization composed of representatives from the national standards organizations of member countries. Membership requirements are given in Ar ...
(ISO) has a special technical committee for cycles, TC149, that has the scope of "Standardization in the field of cycles, their components and accessories with particular reference to terminology, testing methods and requirements for performance and safety, and interchangeability". The
European Committee for Standardization The European Committee for Standardization (CEN, french: Comité Européen de Normalisation) is a public standards organization whose mission is to foster the economy of the European Single Market and the wider European continent in global tr ...
(CEN) also has a specific Technical Committee, TC333, that defines European standards for cycles. Their mandate states that EN cycle standards shall harmonize with
ISO standards The International Organization for Standardization (ISO ) is an international standard development organization composed of representatives from the national standards organizations of member countries. Membership requirements are given in Art ...
. Some CEN cycle standards were developed before ISO published their standards, leading to strong European influences in this area. European cycle standards tend to describe minimum safety requirements, while ISO standards have historically harmonized parts geometry.


Maintenance and repair

Like all devices with mechanical moving parts, bicycles require a certain amount of regular maintenance and replacement of worn parts. A bicycle is relatively simple compared with a car, so some cyclists choose to do at least part of the maintenance themselves. Some components are easy to handle using relatively simple tools, while other components may require specialist manufacturer-dependent tools. Many bicycle components are available at several different price/quality points; manufacturers generally try to keep all components on any particular bike at about the same quality level, though at the very cheap end of the market there may be some skimping on less obvious components (e.g. bottom bracket). * There are several hundred assisted-service Community Bicycle Organizations worldwide. At a Community Bicycle Organization, laypeople bring in bicycles needing repair or maintenance; volunteers teach them how to do the required steps. * Full service is available from
bicycle mechanic A bicycle mechanic or bike mechanic is a mechanic who can perform a wide range of repairs on bicycles. Bicycle mechanics can be employed in various types of stores, ranging from large department stores to small local bike shops; cycling teams, or ...
s at a
local bike shop A local bike shop or local bicycle shop, sometimes abbreviated LBS, is a small business, as distinct from a chain, mail-order or online vendor, specializing in bicycle sale, maintenance and parts. In the UK and Ireland, the expression ''in ...
. * In areas where it is available, some cyclists purchase roadside assistance from companies such as the Better World Club or the
American Automobile Association American Automobile Association (AAA – commonly pronounced as "Triple A") is a federation of motor clubs throughout North America. AAA is a privately held not-for-profit national member association and service organization with over 60 m ...
.


Maintenance

The most basic maintenance item is keeping the tires correctly inflated; this can make a noticeable difference as to how the bike feels to ride. Bicycle tires usually have a marking on the sidewall indicating the pressure appropriate for that tire. Bicycles use much higher pressures than cars: car tires are normally in the range of , whereas bicycle tires are normally in the range of . Another basic maintenance item is regular lubrication of the chain and pivot points for derailleurs and brake components. Most of the bearings on a modern bike are sealed and grease-filled and require little or no attention; such bearings will usually last for or more. The crank bearings require periodic maintenance, which involves removing, cleaning and repacking with the correct grease. The chain and the brake blocks are the components which wear out most quickly, so these need to be checked from time to time, typically every or so. Most local bike shops will do such checks for free. Note that when a chain becomes badly worn it will also wear out the rear cogs/cassette and eventually the chain ring(s), so replacing a chain when only moderately worn will prolong the life of other components. Over the longer term, tires do wear out, after ; a rash of punctures is often the most visible sign of a worn tire.


Repair

Very few bicycle components can actually be repaired; replacement of the failing component is the normal practice. The most common roadside problem is a puncture. After removing the offending nail/tack/thorn/glass shard/etc., there are two approaches: either mend the puncture by the roadside, or replace the inner tube and then mend the puncture in the comfort of home. Some brands of tires are much more puncture-resistant than others, often incorporating one or more layers of
Kevlar Kevlar (para-aramid) is a strong, heat-resistant synthetic fiber, related to other aramids such as Nomex and Technora. Developed by Stephanie Kwolek at DuPont in 1965, the high-strength material was first used commercially in the early 1970s a ...
; the downside of such tires is that they may be heavier and/or more difficult to fit and remove.


Tools

There are specialized bicycle tools for use both in the shop and at the roadside. Many cyclists carry tool kits. These may include a tire patch kit (which, in turn, may contain any combination of a
hand pump Hand pumps are manually operated pumps; they use human power and mechanical advantage to move fluids or air from one place to another. They are widely used in every country in the world for a variety of industrial, marine, irrigation and leis ...
or CO2 pump,
tire lever A tire iron (also tire lever or tire spoon) is a specialized metal tool used in working with tires. Tire irons have not been in common use for automobile tires since the shift to the use of tubeless tires in the late 1950s. Bicycle tire irons ...
s, spare
tubes Tube or tubes may refer to: * ''Tube'' (2003 film), a 2003 Korean film * ''The Tube'' (TV series), a music related TV series by Channel 4 in the United Kingdom * "Tubes" (Peter Dale), performer on the Soccer AM television show * Tube (band), a ...
, self-adhesive patches, or tube-patching material, an adhesive, a piece of sandpaper or a metal grater (for roughing the tube surface to be patched) and sometimes even a block of
French chalk Talc, or talcum, is a clay mineral, composed of hydrated magnesium silicate with the chemical formula Mg3Si4O10(OH)2. Talc in powdered form, often combined with corn starch, is used as baby powder. This mineral is used as a thickening agent a ...
),
wrench A wrench or spanner is a tool used to provide grip and mechanical advantage in applying torque to turn objects—usually rotary fasteners, such as nuts and bolts—or keep them from turning. In the UK, Ireland, Australia, and New Zealan ...
es,
hex key Hex keys of various sizes Socket head screws of various sizes A hex key (also, hex wrench, Allen key and Allen wrench) is a simple driver for bolts or screws that have heads with ''internal'' hexagonal recesses (sockets). Hex keys are form ...
s, screwdrivers, and a
chain tool 400px, A typical chain tool. With a chain placed on the central sprocket, the screw is turned until a pin is pushed from the linkage A chain tool is a small mechanical device used to "break" a bicycle chain in such a way that it can be mended wi ...
. Special, thin wrenches are often required for maintaining various screw-fastened parts, specifically, the frequently lubricated ball-bearing "cones". There are also cycling-specific
multi-tool A multi-tool (or multitool) is a hand tool that combines several individual functions in a single unit. The smallest are credit-card or key sized units designed for carrying in a wallet or on a keyring, but others are designed to be carried i ...
s that combine many of these implements into a single compact device. More specialized bicycle components may require more complex tools, including proprietary tools specific for a given manufacturer.


Social and historical aspects

The bicycle has had a considerable effect on human society, in both the cultural and industrial realms.


In daily life

Around the turn of the 20th century, bicycles reduced crowding in inner-city tenements by allowing workers to commute from more spacious dwellings in the suburbs. They also reduced dependence on horses. Bicycles allowed people to travel for leisure into the country, since bicycles were three times as energy efficient as walking and three to four times as fast. In built-up cities around the world,
urban planning Urban planning, also known as town planning, city planning, regional planning, or rural planning, is a technical and political process that is focused on the development and design of land use and the built environment, including air, water, ...
uses
cycling infrastructure Cycling infrastructure is all infrastructure cyclists are allowed to use. Bikeways include bike paths, bike lanes, cycle tracks, rail trails and, where permitted, sidewalks. Roads used by motorists are also cycling infrastructure, except whe ...
like bikeways to reduce
traffic congestion Traffic congestion is a condition in transport that is characterized by slower speeds, longer trip times, and increased vehicular queueing. Traffic congestion on urban road networks has increased substantially since the 1950s. When traffic de ...
and air pollution. A number of cities around the world have implemented schemes known as
bicycle sharing system A bicycle-sharing system, bike share program, public bicycle scheme, or public bike share (PBS) scheme, is a shared transport service where bicycles are available for shared use by individuals at low cost. The programmes themselves include bot ...
s or community bicycle programs. The first of these was the White Bicycle plan in
Amsterdam Amsterdam ( , , , lit. ''The Dam on the River Amstel'') is the Capital of the Netherlands, capital and Municipalities of the Netherlands, most populous city of the Netherlands, with The Hague being the seat of government. It has a population ...
in 1965. It was followed by yellow bicycles in
La Rochelle La Rochelle (, , ; Poitevin-Saintongeais: ''La Rochéle''; oc, La Rochèla ) is a city on the west coast of France and a seaport on the Bay of Biscay, a part of the Atlantic Ocean. It is the capital of the Charente-Maritime department. With ...
and green bicycles in Cambridge. These initiatives complement public transport systems and offer an alternative to motorized traffic to help reduce congestion and pollution. In Europe, especially in the Netherlands and parts of Germany and Denmark, bicycle commuting is common. In Copenhagen, a cyclists' organization runs a Cycling Embassy that promotes biking for commuting and sightseeing. The United Kingdom has a tax break scheme (IR 176) that allows employees to buy a new bicycle tax free to use for commuting. In the
Netherlands ) , anthem = ( en, "William of Nassau") , image_map = , map_caption = , subdivision_type = Sovereign state , subdivision_name = Kingdom of the Netherlands , established_title = Before independence , established_date = Spanish Netherl ...
all train stations offer free
bicycle parking Bicycle parking typically requires a degree of security to prevent theft. The context for bike parking requires proper infrastructure and equipment ( bike racks, bicycle locks etc.) for secure and convenient storage. Parking facilities include l ...
, or a more secure parking place for a small fee, with the larger stations also offering bicycle repair shops. Cycling is so popular that the parking capacity may be exceeded, while in some places such as Delft the capacity is usually exceeded. In
Trondheim Trondheim ( , , ; sma, Tråante), historically Kaupangen, Nidaros and Trondhjem (), is a city and municipality in Trøndelag county, Norway. As of 2020, it had a population of 205,332, was the third most populous municipality in Norway, and ...
in Norway, the Trampe bicycle lift has been developed to encourage cyclists by giving assistance on a steep hill. Buses in many cities have
bicycle carrier A bicycle, also called a pedal cycle, bike or cycle, is a human-powered or motor-powered assisted, pedal-driven, single-track vehicle, having two wheels attached to a frame, one behind the other. A is called a cyclist, or bicyclist. Bic ...
s mounted on the front. There are towns in some countries where
bicycle culture Bicycle culture can refer to a mainstream culture that supports the use of bicycles or to a subculture. Although "bike culture" is often used to refer to various forms of associated fashion, it is erroneous to call fashion in and of itself a cult ...
has been an integral part of the landscape for generations, even without much official support. That is the case of
Ílhavo Ílhavo () is a municipality located in the centre of Portugal. The population in 2021 was 39,239, in an area of 73.48 km². The Municipality of Ílhavo includes four parishes and two cities: Gafanha da Nazaré and Ílhavo (City). General i ...
, in Portugal. In cities where bicycles are not integrated into the public transportation system, commuters often use bicycles as elements of a mixed-mode commute, where the bike is used to travel to and from train stations or other forms of rapid transit. Some students who commute several miles drive a car from home to a campus parking lot, then ride a bicycle to class.
Folding bicycle A folding bicycle is a bicycle designed to fold into a compact form, facilitating transport and storage. When folded, the bikes can be more easily carried into buildings, on public transportation (facilitating mixed-mode commuting and bicycl ...
s are useful in these scenarios, as they are less cumbersome when carried aboard. Los Angeles removed a small amount of seating on some trains to make more room for bicycles and wheel chairs. Some US companies, notably in the tech sector, are developing both innovative cycle designs and cycle-friendliness in the workplace.
Foursquare Four square is a ball game. Four square may also refer to: Internet and entertainment * Foursquare City Guide, a local search and discovery app * ''4 Square'' (game show), a British game show * ''4 Square'' (TV series), a Canadian children's s ...
, whose CEO
Dennis Crowley Dennis Crowley (born June 19, 1976) is an American Internet entrepreneur who co-founded the social networking sites Dodgeball and Foursquare. Education Crowley was born in Medway, Massachusetts to Mary Moraski Crowley and Dennis P Crowley. He gr ...
"pedaled to pitch meetings ...
hen he Hen commonly refers to a female animal: a female chicken, other gallinaceous bird, any type of bird in general, or a lobster. It is also a slang term for a woman. Hen or Hens may also refer to: Places Norway *Hen, Buskerud, a village in Ringe ...
was raising money from
venture capitalists Venture capital (often abbreviated as VC) is a form of private equity financing that is provided by venture capital firms or funds to start-up company, startups, early-stage, and emerging companies that have been deemed to have high growth poten ...
" on a two-wheeler, chose a new location for its New York headquarters "based on where biking would be easy". Parking in the office was also integral to HQ planning. Mitchell Moss, who runs the
Rudin Center for Transportation Policy & Management The mission of the Rudin Center for Transportation Policy and Management is to create and disseminate new ideas in transportation policy and planning that will foster greater economic development and opportunity in a more sustainable and just socie ...
at
New York University New York University (NYU) is a private research university in New York City. Chartered in 1831 by the New York State Legislature, NYU was founded by a group of New Yorkers led by then-Secretary of the Treasury Albert Gallatin. In 1832, the ...
, said in 2012: "Biking has become the mode of choice for the educated high tech worker". Bicycles offer an important mode of transport in many developing countries. Until recently, bicycles have been a staple of everyday life throughout Asian countries. They are the most frequently used method of transport for commuting to work, school, shopping, and life in general. In Europe, bicycles are commonly used. They also offer a degree of exercise to keep individuals healthy. Bicycles are also celebrated in the visual arts. An example of this is the
Bicycle Film Festival The Bicycle Film Festival (BFF) is an independent film festival that screens films related to urban cycling culture, in cities around the world. It was founded in 2001 and is based in New York. History In 2001 Brendt Barbur was hit by a bus whi ...
, a film festival hosted all around the world.


Poverty alleviation


Female emancipation

The safety bicycle gave women unprecedented mobility, contributing to their emancipation in Western nations. As bicycles became safer and cheaper, more women had access to the personal freedom that bicycles embodied, and so the bicycle came to symbolize the
New Woman The New Woman was a feminist ideal that emerged in the late 19th century and had a profound influence well into the 20th century. In 1894, Irish writer Sarah Grand (1854–1943) used the term "new woman" in an influential article, to refer to ...
of the late 19th century, especially in Britain and the United States. The bicycle craze in the 1890s also led to a movement for so-called
rational dress Victorian dress reform was an objective of the Victorian dress reform movement (also known as the rational dress movement) of the middle and late Victorian era, led by various reformers who proposed, designed, and wore clothing considered more ...
, which helped liberate women from corsets and ankle-length skirts and other restrictive garments, substituting the then-shocking
bloomers Bloomers, also called the bloomer, the Turkish dress, the American dress, or simply reform dress, are divided women's garments for the lower body. They were developed in the 19th century as a healthful and comfortable alternative to the heavy, ...
. The bicycle was recognized by 19th-century feminists and
suffragist Suffrage, political franchise, or simply franchise, is the right to vote in public, political elections and referendums (although the term is sometimes used for any right to vote). In some languages, and occasionally in English, the right to v ...
s as a "freedom machine" for women. American
Susan B. Anthony Susan B. Anthony (born Susan Anthony; February 15, 1820 – March 13, 1906) was an American social reformer and women's rights activist who played a pivotal role in the women's suffrage movement. Born into a Quaker family committed to s ...
said in a ''
New York World The ''New York World'' was a newspaper published in New York City from 1860 until 1931. The paper played a major role in the history of American newspapers. It was a leading national voice of the Democratic Party. From 1883 to 1911 under publi ...
'' interview on 2 February 1896: "I think it has done more to emancipate woman than any one thing in the world. I rejoice every time I see a woman ride by on a wheel. It gives her a feeling of self-reliance and independence the moment she takes her seat; and away she goes, the picture of untrammelled womanhood." In 1895
Frances Willard Frances Elizabeth Caroline Willard (September 28, 1839 – February 17, 1898) was an American educator, temperance reformer, and women's suffragist. Willard became the national president of Woman's Christian Temperance Union (WCTU) in 1879 an ...
, the tightly laced president of the
Woman's Christian Temperance Union The Woman's Christian Temperance Union (WCTU) is an international temperance organization, originating among women in the United States Prohibition movement. It was among the first organizations of women devoted to social reform with a program th ...
, wrote ''A Wheel Within a Wheel: How I Learned to Ride the Bicycle, with Some Reflections by the Way'', a 75-page illustrated memoir praising "Gladys", her bicycle, for its "gladdening effect" on her health and political optimism. Willard used a cycling metaphor to urge other suffragists to action. In 1985, Georgena Terry started the first women-specific bicycle company. Her designs featured frame geometry and wheel sizes chosen to better fit women, with shorter top tubes and more suitable reach.


Economic implications

Bicycle manufacturing proved to be a training ground for other industries and led to the development of advanced metalworking techniques, both for the frames themselves and for special components such as
ball bearing A ball bearing is a type of rolling-element bearing that uses balls to maintain the separation between the bearing races. The purpose of a ball bearing is to reduce rotational friction and support radial and axial loads. It achieves this ...
s,
washers Washer most commonly refers to: *Washer (hardware), a thin usually disc-shaped plate with a hole in the middle typically used with a bolt or nut *Washing machine, for cleaning clothes Washer may also refer to: *Dishwasher, a machine for cleani ...
, and sprockets. These techniques later enabled skilled metalworkers and mechanics to develop the components used in early automobiles and aircraft. Wilbur and Orville Wright, a pair of businessmen, ran the
Wright Cycle Company The bicycle business of the Wright brothers, the Wright Cycle Company (originally the ''Wright Cycle Exchange'') successively occupied six different locations in Dayton, Ohio. Orville and Wilbur Wright began their bicycle repair, rental and sales ...
which designed, manufactured and sold their bicycles during the
bike boom The bike boom or bicycle craze is any of several specific historic periods marked by increased bicycle enthusiasm, popularity, and sales. Prominent examples include 1819 and 1868, as well as the decades of the 1890s and 1970sthe latter espec ...
of the 1890s. They also served to teach the industrial models later adopted, including mechanization and
mass production Mass production, also known as flow production or continuous production, is the production of substantial amounts of standardized products in a constant flow, including and especially on assembly lines. Together with job production and batch ...
(later copied and adopted by
Ford Ford commonly refers to: * Ford Motor Company, an automobile manufacturer founded by Henry Ford * Ford (crossing), a shallow crossing on a river Ford may also refer to: Ford Motor Company * Henry Ford, founder of the Ford Motor Company * Ford F ...
and
General Motors The General Motors Company (GM) is an American Multinational corporation, multinational Automotive industry, automotive manufacturing company headquartered in Detroit, Michigan, United States. It is the largest automaker in the United States and ...
), vertical integration (also later copied and adopted by Ford), aggressive advertising (as much as 10% of all advertising in U.S. periodicals in 1898 was by bicycle makers), lobbying for better roads (which had the side benefit of acting as advertising, and of improving sales by providing more places to ride), all first practiced by Pope. In addition, bicycle makers adopted the annual model change (later derided as
planned obsolescence In economics and industrial design, planned obsolescence (also called built-in obsolescence or premature obsolescence) is a policy of planning or designing a product with an artificially limited useful life or a purposely frail design, so that ...
, and usually credited to General Motors), which proved very successful. Early bicycles were an example of
conspicuous consumption In sociology and in economics, the term conspicuous consumption describes and explains the consumer practice of buying and using goods of a higher quality, price, or in greater quantity than practical. In 1899, the sociologist Thorstein Veblen co ...
, being adopted by the fashionable elites. In addition, by serving as a platform for accessories, which could ultimately cost more than the bicycle itself, it paved the way for the likes of the
Barbie doll Barbie is a fashion doll manufactured by American toy company Mattel, Inc. and launched on March 9, 1959. American businesswoman Ruth Handler is credited with the creation of the doll using a German doll called Bild Lilli as her inspiration. ...
. Bicycles helped create, or enhance, new kinds of businesses, such as bicycle messengers, traveling seamstresses, riding academies, and racing rinks. Their board tracks were later adapted to early
motorcycle A motorcycle (motorbike, bike, or trike (if three-wheeled)) is a two or three-wheeled motor vehicle steered by a handlebar. Motorcycle design varies greatly to suit a range of different purposes: long-distance travel, commuting, cruising ...
and
automobile racing Auto racing (also known as car racing, motor racing, or automobile racing) is a motorsport involving the racing of automobiles for competition. Auto racing has existed since the invention of the automobile. Races of various sorts were organi ...
. There were a variety of new inventions, such as
spoke A spoke is one of some number of rods radiating from the center of a wheel (the hub where the axle connects), connecting the hub with the round traction surface. The term originally referred to portions of a log that had been riven (split l ...
tighteners, and specialized lights, socks and shoes, and even cameras, such as the Eastman Company's Poco. Probably the best known and most widely used of these inventions, adopted well beyond cycling, is Charles Bennett's Bike Web, which came to be called the
jock strap A jockstrap, also a jock (male), jill (female), strap, cup, groin guard, pelvic protector (female), supporter, or athletic supporter, is an undergarment for protecting the testes and penis or vulva during contact sports or other vigorous physic ...
. They also presaged a move away from public transit that would explode with the introduction of the automobile. J. K. Starley's company became the Rover Cycle Company Ltd. in the late 1890s, and then renamed the
Rover Company The Rover Company Limited was a British car manufacturing company that operated from its base in Solihull in Warwickshire. Its lasting reputation for quality and performance was such that its first postwar model reviewed by '' Road & Track'' i ...
when it started making cars.
Morris Motors Morris Motors Limited was a British privately owned motor vehicle manufacturing company formed in 1919 to take over the assets of William Morris's WRM Motors Limited and continue production of the same vehicles. By 1926 its production represent ...
Limited (in
Oxford Oxford () is a city in England. It is the county town and only city of Oxfordshire. In 2020, its population was estimated at 151,584. It is north-west of London, south-east of Birmingham and north-east of Bristol. The city is home to the ...
) and
Škoda Škoda means ''pity'' in the Czech and Slovak languages. It may also refer to: Czech brands and enterprises * Škoda Auto, automobile and previously bicycle manufacturer in Mladá Boleslav ** Škoda Motorsport, the division of Škoda Auto respons ...
also began in the bicycle business, as did the Wright brothers. Alistair Craig, whose company eventually emerged to become the engine manufacturers
Ailsa Craig Ailsa Craig (; sco, Ailsae Craig; gd, Creag Ealasaid) is an island of in the outer Firth of Clyde, west of mainland Scotland, upon which microgranite has long been quarried to make curling stones. The now-uninhabited island comprises the r ...
, also started from manufacturing bicycles, in Glasgow in March 1885. In general, U.S. and European cycle manufacturers used to assemble cycles from their own frames and components made by other companies, although very large companies (such as Raleigh) used to make almost every part of a bicycle (including bottom brackets, axles, etc.) In recent years, those bicycle makers have greatly changed their methods of production. Now, almost none of them produce their own frames. Many newer or smaller companies only design and market their products; the actual production is done by Asian companies. For example, some 60% of the world's bicycles are now being made in China. Despite this shift in production, as nations such as China and India become more wealthy, their own use of bicycles has declined due to the increasing affordability of cars and motorcycles. One of the major reasons for the proliferation of Chinese-made bicycles in foreign markets is the lower cost of labor in China. In line with the European financial crisis, in Italy in 2011 the number of bicycle sales (1.75 million) just passed the number of new car sales.


Environmental impact

One of the profound economic implications of bicycle use is that it liberates the user from
motor fuel An engine or motor is a machine designed to convert one or more forms of energy into mechanical energy. Available energy sources include potential energy (e.g. energy of the Earth's gravitational field as exploited in hydroelectric power gen ...
consumption. (Ballantine, 1972) The bicycle is an inexpensive, fast, healthy and environmentally friendly mode of transport.
Ivan Illich Ivan Dominic Illich ( , ; 4 September 1926 – 2 December 2002) was an Austrian Roman Catholic priest, theologian, philosopher, and social critic. His 1971 book '' Deschooling Society'' criticises modern society's institutional approach to edu ...
stated that bicycle use extended the usable physical environment for people, while alternatives such as cars and motorways degraded and confined people's environment and mobility. Currently, two billion bicycles are in use around the world. Children, students, professionals, laborers, civil servants and seniors are pedaling around their communities. They all experience the freedom and the natural opportunity for exercise that the bicycle easily provides. Bicycle also has lowest carbon intensity of travel.


Religious implications

The proper
Islamic bicycle Bicycling in Islam is a topic of discussion in Islam, primarily in regard to its use by Muslim women. Religious scholars are worried in particular about the effects of cycling on women's modesty (not revealing the body) and mobility (social control ...
for the Iranian women is a topic of heated discussion in both Sunni and Shia Islam.


Manufacturing

The global bicycle market is $61 billion in 2011. 130 million bicycles were sold every year globally and 66% of them were made in China.


Legal requirements

Early in its development, as with
automobile A car or automobile is a motor vehicle with Wheel, wheels. Most definitions of ''cars'' say that they run primarily on roads, Car seat, seat one to eight people, have four wheels, and mainly transport private transport#Personal transport, pe ...
s, there were restrictions on the operation of bicycles. Along with advertising, and to gain free publicity,
Albert A. Pope Albert Augustus Pope (May 20, 1843 – August 10, 1909) was a Brevet Lieutenant-Colonel in the Union Army. He was an importer, promoter, and manufacturer of bicycles, and a manufacturer of automobiles. Early life Pope was born on May 20, 18 ...
litigated on behalf of cyclists. The 1968
Vienna Convention on Road Traffic The Convention on Road Traffic, commonly known as the Vienna Convention on Road Traffic, is an international treaty designed to facilitate international road traffic and to increase road safety by establishing standard traffic rules among the co ...
of the United Nations considers a bicycle to be a vehicle, and a person controlling a bicycle (whether actually riding or not) is considered an operator. The traffic codes of many countries reflect these definitions and demand that a bicycle satisfy certain legal requirements before it can be used on public roads. In many
jurisdiction Jurisdiction (from Latin 'law' + 'declaration') is the legal term for the legal authority granted to a legal entity to enact justice. In federations like the United States, areas of jurisdiction apply to local, state, and federal levels. Jur ...
s, it is an offense to use a bicycle that is not in a roadworthy condition. In most jurisdictions, bicycles must have functioning front and rear lights when ridden after dark. As some generator or
dynamo file:DynamoElectricMachinesEndViewPartlySection USP284110.png, "Dynamo Electric Machine" (end view, partly section, ) A dynamo is an electrical generator that creates direct current using a commutator (electric), commutator. Dynamos were the f ...
-driven lamps operate only while moving, rear reflectors are frequently also mandatory. Since a moving bicycle makes little noise, some countries insist that bicycles have a warning bell for use when approaching pedestrians, equestrians, and other cyclists, though sometimes a
car horn A horn is a sound-making device that can be equipped to motor vehicles, buses, bicycles, trains, trams (otherwise known as streetcars in North America), and other types of vehicles. The sound made usually resembles a "honk" (older vehicles) or a ...
can be used when a 12 volt battery is available. Some countries require child and/or adult cyclists to wear helmets, as this may protect riders from head trauma. Countries which require adult cyclists to wear helmets include Spain,
New Zealand New Zealand ( mi, Aotearoa ) is an island country in the southwestern Pacific Ocean. It consists of two main landmasses—the North Island () and the South Island ()—and over 700 smaller islands. It is the sixth-largest island count ...
and Australia. Mandatory helmet wearing is one of the most controversial topics in the cycling world, with proponents arguing that it reduces head injuries and thus is an acceptable requirement, while opponents argue that by making cycling seem more dangerous and cumbersome, it reduces cyclist numbers on the streets, creating an overall negative health effect (fewer people cycling for their own health, and the remaining cyclists being more exposed through a reversed
safety in numbers Safety in numbers is the hypothesis that, by being part of a large physical group or mass, an individual is less likely to be the victim of a mishap, accident, attack, or other bad event. Some related theories also argue (and can show statistica ...
effect).


Theft

Bicycles are popular targets for theft, due to their value and ease of resale. The number of bicycles stolen annually is difficult to quantify as a large number of crimes are not reported. Around 50% of the participants in the Montreal International Journal of Sustainable Transportation survey were subjected to a bicycle theft in their lifetime as active cyclists. Most bicycles have serial numbers that can be recorded to verify identity in case of theft.


See also

*
Bicycle and motorcycle geometry Bicycle and motorcycle geometry is the collection of key measurements (lengths and angles) that define a particular bike configuration. Primary among these are wheelbase, steering axis angle, fork offset, and trail. These parameters have a major ...
*
Bicycle drum brake A bicycle brake reduces the speed of a bicycle or prevents it from moving. The three main types are: rim brakes, disc brakes, and drum brakes. Most bicycle brake systems consist of three main components: a mechanism for the rider to apply the b ...
*
Bicycle parking station A bicycle parking station, or bicycle garage, is a building or structure designed for use as a bicycle parking facility. Such a facility can be as simple as a lockable bike cage or shed or as complex as a purpose-built multi-level building: the ...
*
Bicycle-sharing system A bicycle-sharing system, bike share program, public bicycle scheme, or public bike share (PBS) scheme, is a shared transport service where bicycles are available for shared use by individuals at low cost. The programmes themselves include bot ...
*
Cyclability Cyclability is the degree of ease of bicycle circulation. A greater degree of cyclability in cities is related, among others, to benefits for people's health, lower levels of air and noise pollution, improved fluidity of traffic or increased prod ...
*
List of bicycle types This list gives an overview of different types of bicycles, categorized by function (racing, recreation, etc.); number of riders (one, two, or more); by construction or frame type (upright, folding, etc.); by gearing (single speed, derailleur g ...
*
Outline of bicycles :''This article is an outline about bicycles themselves. For an outline about cycling, the associated activity, see outline of cycling.'' The following outline is provided as an overview of and topical guide to bicycles: Bicycle – pedal- ...
*
Outline of cycling :''This article is an outline about the activity of cycling. For an outline about bicycles themselves, see outline of bicycles.'' :The following ''outline'' is provided as an overview of, as well as a topical guide to cycling: Cycling, al ...
*
World Bicycle Day In April 2018, the United Nations General Assembly declared June 3 as International World Bicycle Day. The resolution for World Bicycle Day recognizes "the uniqueness, longevity and versatility of the bicycle, which has been in use for two cen ...


Notes


References


Citations


Sources

; General * *


Further reading

* * Illustrated; 139 pp. Bicycle history.


External links


A History of Bicycles and Other Cycles
at the
Canada Science and Technology Museum The Canada Science and Technology Museum (abbreviated as CSTM; french: Musée des sciences et de la technologie du Canada) is a national museum of science and technology in Ottawa, Ontario, Canada. The museum has a mandate to preserve and promote ...
{{Authority control 19th-century inventions Appropriate technology Articles containing video clips Sustainable technologies Sustainable transport German inventions