Albert Bridge is a heritage-listed

railway bridge A bridge is a structure built to span a physical obstacle (such as a body of water, valley, road, or rail) without blocking the way underneath. It is constructed for the purpose of providing passage over the obstacle, which is usually someth ...

of steel truss design crossing the Brisbane River between

Indooroopilly Indooroopilly is a riverside suburb 7km west of the Brisbane CBD, Queensland, Australia. In the , Indooroopilly had a population of 12,242 people. Geography Indooroopilly is bounded to the south and south-east by the median of the Brisbane Ri ...

and Chelmer in the

City of Brisbane The City of Brisbane is a local government area (LGA) which comprises the inner portion of the metropolitan area of Brisbane, the capital of Queensland, Australia. Its governing body is the Brisbane City Council. Unlike LGAs in the other mainlan ...

Queensland ) , nickname = Sunshine State , image_map = Queensland in Australia.svg , map_caption = Location of Queensland in Australia , subdivision_type = Country , subdivision_name = Australia , established_title = Before federation , establishe ...

, Australia. It was designed by Henry Charles Stanley and built from 1894 to 1895 by John McCormick & Son as a replacement for an earlier bridge lost to flooding in 1893. Both bridges were named in honour of the Prince of Wales, Prince Albert. It was added to the

Queensland Heritage Register The Queensland Heritage Register is a heritage register, a statutory list of places in Queensland, Australia that are protected by Queensland legislation, the Queensland Heritage Act 1992. It is maintained by the Queensland Heritage Council. A ...

on 21 October 1992. The Albert Bridge links

and Chelmer railway station. The structure consists of two steel spans supported by masonry

abutment An abutment is the substructure at the ends of a bridge span or dam supporting its superstructure. Single-span bridges have abutments at each end which provide vertical and lateral support for the span, as well as acting as retaining walls ...

s and a central concrete pier that is encased in an iron caisson. A footway was provided on the upstream side.

History

The first Albert Bridge on the site was completed in July 1876 and enabled the

Main Line railway The Main Line is a railway line in South East Queensland, Australia. It was opened in a series of sections between 1865 and 1867. It commences at Roma St Station in Brisbane and extends west 161 km to Toowoomba. It is the first narrow gau ...

from Grandchester to

Ipswich Ipswich () is a port town and borough in Suffolk, England, of which it is the county town. The town is located in East Anglia about away from the mouth of the River Orwell and the North Sea. Ipswich is both on the Great Eastern Main Line ...

to be extended to reach

Brisbane Brisbane ( ) is the capital and most populous city of the Australian state of Queensland, and the third-most populous city in Australia and Oceania, with a population of approximately 2.6 million. Brisbane lies at the centre of the South ...

itself. In the early days of settlement, the Brisbane River at

provided an obstacle to the construction of a railway between Brisbane and the mining centre of Ipswich. At this time, a river boat service linked the two centres. The completion of the first Albert Bridge enabled the

Ipswich railway line } The Ipswich and Rosewood line refers to the section of the Main Line to Toowoomba that has a regular suburban rail service, extending southwest from the Brisbane central business district. It is part of the Queensland Rail City network. Hi ...

to open in 1875. The first bridge was destroyed in the 1893 flood. In the meantime, ferries were used to transport people and goods across the busy river. This, however, led to the capsize of the ferry ‘’Pearl’’ disaster in 1896 with the loss of more than 40 lives. The second and current Albert Bridge was built in 1895. It was designed by Henry Charles Stanley, Queensland's Chief Engineer of Railways from 1891 to 1901 and is considered his major work. He designed a "hogsback" steel truss bridge on masonry piers. In designing the bridge as two long spans with one central pier, he tried to minimise the obstruction to flood waters created by multiple piers, which had been the downfall of the first bridge. Innovations in the design included the attachment of cross girders, protection against derailment, provision against strong wind gusts, and provision for free expansion under varying temperatures. The working drawings and specification were prepared by FL Keir of the Chief Engineer's office, and were completed by mid-1893. Keir was also the resident engineer on the site. In August 1893 the contract was let to

contractors John McCormick & Son, with a price of . McCormick & Son also later won the contract for the ironwork on the second permanent Victoria Bridge, 1896–97. Expiry date for the Albert Bridge contract was set at 14 December 1894, but it was not opened to traffic until August 1895. A Scottish coal strike held up delivery of the rolled steel for eight months, and removal of the river bedrock for the central pier alone took four months. A condition of the construction contract was that as much of the work as possible be done in Queensland. Messrs McCormick erected a workshop adjacent to the site at Indooroopilly, and imported machinery necessary for constructing the superstructure and the caisson for the central pier. Up to 240 persons were employed on site at any one time, and quarry workers provided freestone from Pearson's quarries at Helidon, the bluestone in the concrete from Jenkin's

Bundamba Bundamba is a suburb of Ipswich in the City of Ipswich, Queensland, Australia. In the Bundamba had a population of 6,514 people. Geography The Bremer River forms the western part of the suburb's northern boundary. The Warrego Highway enter ...

quarry, and the granite for the bedstones and cutwater quoins from Mount Crosby. In 1895 the bridge was the largest in Australia of local manufacture. The most difficult aspect of the work was the construction of the central pier and its foundation caisson. The latter weighed about , rested below high water mark, and was sunk into the rock. The riverbed sand and gravel could be dredged, but divers extracted the rock manually. The southern span was erected above what remained of the former bridge, and was extended to the centre pier. The old pylons were then removed. The northern truss was floated into position. The shore end rested on two trolleys, and when the tide was at its highest, specially constructed staging on an old barque took the weight of the other end of the truss from temporary piles. Winches were then used to pull the hulk across the river toward the centre pier, to which the truss was attached. The cores of the earlier bridge abutments were widened and heightened to take the new superstructure. Parapets were constructed after the trusses had been fixed in place, and were completed in November 1895. When opened the bridge also catered for pedestrian traffic, until the construction of the nearby

Walter Taylor Bridge The Walter Taylor Bridge is a heritage-listed suspension bridge crossing the Brisbane River between Indooroopilly and Chelmer in Brisbane, Queensland, Australia. It is shared by motor traffic and pedestrians and is the only habitable bridge ...

in 1937. The Albert Bridge remains one of Australia's largest truss bridges. At the time of its completion, as a metal truss bridge it was second only to the first Hawkesbury rail bridge (1889) in span length. The Albert Bridge is still Australia's third longest span metal truss bridge, after Brisbane's

Story Bridge The Story Bridge is a heritage-listed steel cantilever bridge spanning the Brisbane River that carries vehicular, bicycle and pedestrian traffic between the northern and the southern suburbs of Brisbane, Queensland, Australia. It is the long ...

(1940) (

) and the second Hawkesbury rail bridge (1945). The bridge was integral to the southwest railway system linking Brisbane with

, the

Darling Downs The Darling Downs is a farming region on the western slopes of the Great Dividing Range in southern Queensland, Australia. The Downs are to the west of South East Queensland and are one of the major regions of Queensland. The name was general ...

, and southeast Queensland. With increased traffic it was supplemented with an adjacent upstream rail bridge in 1957, which together remained the only Brisbane River rail crossing prior to construction of the

Merivale Bridge The Merivale Bridge is a double track railway bridge crossing the Brisbane River. It crosses the Milton Reach of the river, slightly to the west of the William Jolly Bridge. Exclusively a railway crossing, it is located between the stations of ...

in 1978. The Albert Bridge currently handles only passenger traffic. A second unnamed railway bridge is located between the Albert Bridge and the

. This second crossing was constructed in 1957 as part of the quadruplication of the Ipswich railway line.

Description

The Albert Bridge spans the Brisbane River from Indooroopilly to Chelmer, at the junction of the Chelmer and

reaches. It is a fully riveted structure consisting of two arched "hogsback" mild steel

trusses A truss is an assembly of ''members'' such as beams, connected by ''nodes'', that creates a rigid structure. In engineering, a truss is a structure that "consists of two-force members only, where the members are organized so that the assembla ...

supported on stone abutments either side, and on a central concrete pier. This pier is encased in an elliptical wrought- iron caisson to low water level, then built up with masonry to the

truss A truss is an assembly of ''members'' such as beams, connected by ''nodes'', that creates a rigid structure. In engineering, a truss is a structure that "consists of two-force members only, where the members are organized so that the assembl ...

bearings. Each truss is long, high in the middle, wide, and weighs approximately . Their design employs a double-intersection web system of diagonal members, based on the Linville system developed in the United States in the 1860s. They are strengthened by horizontal wind bracing at roadway level, and by elaborate overhead cross bracing. The double railroad is carried by four longitudinal steel trough girders, with the sides of the troughs acting as guards against derailment. These are supported by massive cross-girders riveted to the underneath of the vertical struts and lower booms of the main trusses, at intervals. The decking consists of ironbark longitudinals bedded on bitumen and sand, and bolted to steel tee bars which connect the trough girders transversely. A cantilevered

wrought iron Wrought iron is an iron alloy with a very low carbon content (less than 0.08%) in contrast to that of cast iron (2.1% to 4%). It is a semi-fused mass of iron with fibrous slag inclusions (up to 2% by weight), which give it a wood-like "grain" ...

footway is carried on the upstream side of the bridge.

Heritage listing

The Albert Bridge was registered on the (now defunct) Register of the National Estate in 1988. It was listed on the

on 21 October 1992 having satisfied the following criteria. The place is important in demonstrating the evolution or pattern of Queensland's history. Albert Bridge at Indooroopilly is significant as an early, large span metal truss bridge in Australia, and remains the country's third longest span metal truss bridge. At the time of construction, Albert Bridge was the largest bridge in Australia to be manufactured locally. Albert Bridge is significant for its contribution to the railway system linking the capital with southern and western Queensland, remaining for over six decades part of the only railway link across the Brisbane River. The place is important in demonstrating the principal characteristics of a particular class of cultural places. The bridge is highly intact, and provides important physical evidence of late 19th century railway bridge design and construction in Australia. The place is important because of its aesthetic significance. The bridge is important also for its landmark quality and aesthetic contribution to the riverscape along the Indooroopilly reach of the Brisbane River. The place is important in demonstrating a high degree of creative or technical achievement at a particular period. It is important for its innovations in design and implementation, and remains a major example of the design skills of engineer HC Stanley, and of the work of Brisbane contractors John McCormick & Son. The place has a special association with the life or work of a particular person, group or organisation of importance in Queensland's history. It is important for its innovations in design and implementation, and remains a major example of the design skills of engineer HC Stanley, and of the work of Brisbane contractors John McCormick & Son.

References

Attribution

External links