HOME

TheInfoList



OR:

Audio mixing is the process by which multiple sounds are combined into one or more
channels Channel, channels, channeling, etc., may refer to: Geography * Channel (geography), in physical geography, a landform consisting of the outline (banks) of the path of a narrow body of water. Australia * Channel Country, region of outback Austral ...
. In the process, a source's volume level, frequency content, dynamics, and panoramic position are manipulated or enhanced. This practical, aesthetic, or otherwise creative treatment is done in order to produce a finished version that is appealing to listeners. Audio mixing is practiced for music, film, television and live sound. The process is generally carried out by a
mixing engineer A mixing engineer (or simply mix engineer) is responsible for combining ("mixing") different sonic elements of an auditory piece into a complete rendition (also known as "final mix" or "mixdown"), whether in music, film, or any other content of a ...
operating a
mixing console A mixing console or mixing desk is an electronic device for Audio mixing (recorded music), mixing audio signals, used in sound recording and reproduction and sound reinforcement systems. Inputs to the console include microphones, signals fro ...
or
digital audio workstation A digital audio workstation (DAW) is an electronic device or application software used for recording, editing and producing audio files. DAWs come in a wide variety of configurations from a single software program on a laptop, to an integrat ...
.


Recorded music

Before the introduction of multitrack recording, all the sounds and effects that were to be part of a recording were mixed together at one time during a live performance. If the sound blend was not satisfactory, or if one musician made a mistake, the selection had to be performed over until the desired balance and performance was obtained. However, with the introduction of multitrack recording, the production phase of a modern recording has radically changed into one that generally involves three stages: recording, overdubbing, and mixdown.


Film and television

During production dialogue recording of actors is done by a person variously known as location sound mixer, production sound or some similar designation. That person is a department head with a crew consisting of a boom operator and sometimes a cable person. Audio mixing for film and television is a process during the post-production stage of a
moving image A film also called a movie, motion picture, moving picture, picture, photoplay or (slang) flick is a work of visual art that simulates experiences and otherwise communicates ideas, stories, perceptions, feelings, beauty, or atmosphere ...
program by which a multitude of recorded sounds are combined. In the editing process, the source's signal level, frequency content, dynamics, and panoramic position are commonly manipulated and effects added. In video production, this is called sweetening. The process takes place on a mixing stage, typically in a studio or purpose-built
theater Theatre or theater is a collaborative form of performing art that uses live performers, usually actors or actresses, to present the experience of a real or imagined event before a live audience in a specific place, often a stage. The perform ...
, once the picture elements are edited into a final version. Normally the engineers will mix four main audio elements called stems: speech (dialogue,
ADR ADR or adr may refer to: Computing * Asynchronous DRAM refresh, an approach for persistent memory found in some Intel Xeon processors * The adr microformat, part of the hCard microformat * Architectural decision record * Action–domain–respond ...
,
voice-over Voice-over (also known as off-camera or off-stage commentary) is a production technique where a voice—that is not part of the narrative (non- diegetic)—is used in a radio, television production, filmmaking, theatre, or other presentation ...
s, etc.), ambience (or atmosphere), sound effects, and music. As multi machine synchronization became available, filmmakers were able to split elements into multiple reels. With the advent of digital workstations and growing complexity, track counts in excess of 100 became common.


Dialogue intelligibility

Since the 2010s, critics and members of the audience have reported that dialogue in films tends to be increasingly more difficult to understand than in older films, to the point where viewers need to rely on subtitles to understand what is being said. Ben Pearson of ''
SlashFilm ''/Film'', also spelled ''Slashfilm'', is a blog that covers movie news, reviews, interviews, and trailers. It was founded by Peter Sciretta in August 2005. Podcasts Six podcasts have run on the site. ''The /Filmcast'', hosted by David Chen, De ...
'' attributed this to a combination of factors, only some of which can be addressed through audio mixing: * Unintelligibility as a stylistic choice by filmmakers, particularly by
Christopher Nolan Christopher Edward Nolan (born 30 July 1970) is a British-American filmmaker. Known for his lucrative Hollywood blockbusters with complex storytelling, Nolan is considered a leading filmmaker of the 21st century. His films have grossed $5&nb ...
and those influenced by him * Soft, under one's breath delivery of lines by actors, a practice particularly popular among younger actors, as opposed to the theatrical clarity of delivery previously used * Low priority of sound recording on set, with priority given to the visual aspects of production * Increased technological possibilities, including in post-production, no longer compel filmmakers to obtain an optimal recording on set * The film crew's familiarity with the dialogue can lead them to overestimate its intelligibility * Theaters play films at a lower than recommended volume to avoid excessive loudness complaints from the audience * Different standards of compression and volume balance applied by the various streaming platforms * Inadequate audio remixing for films played in a home theater setting or on mobile devices, where the audio playback capabilities of the various setups strongly differ from each other and from cinema settings


Live sound

Live sound mixing Live sound mixing is the blending of multiple sound sources by an audio engineer using a mixing console or software. Sounds that are mixed include those from instruments and voices which are picked up by microphones (for drum kit, lead vocals an ...
is the process of electrically blending together multiple sound sources at a live event using a
mixing console A mixing console or mixing desk is an electronic device for Audio mixing (recorded music), mixing audio signals, used in sound recording and reproduction and sound reinforcement systems. Inputs to the console include microphones, signals fro ...
. Sounds used include those from instruments, voices, and pre-recorded material. Individual sources may be equalised and routed to
effect processors An effects unit or effects pedal is an electronic device that alters the sound of a musical instrument or other audio source through audio signal processing. Common effects include distortion/overdrive, often used with electric guitar in el ...
to ultimately be amplified and reproduced via
loudspeakers A loudspeaker (commonly referred to as a speaker or speaker driver) is an electroacoustic transducer that converts an electrical audio signal into a corresponding sound. A ''speaker system'', also often simply referred to as a "speaker" or "l ...
. The live sound engineer balances the various audio sources in a way that best suits the needs of the event.


References


Further reading

*Rose, Jay, '' Producing Great Sound for Film and Video''. Focal Press, fourth edition 2014 Book info. * * {{cite book , title=Mixing Audio: Concepts, Practices and Tools , author=Izhaki, R. , isbn=9781136114229 , url=https://books.google.com/books?id=4WlM5vpO5QsC , date=2013 , publisher=Taylor & Francis Audio engineering Cinematic techniques Film sound production