![ArmorPiercingShell](https://upload.wikimedia.org/wikipedia/commons/e/e0/ArmorPiercingShell.png)
Armour-piercing ammunition (AP) is a type of
projectile designed to penetrate either
body armour
Body armor, also known as body armour, personal armor or armour, or a suit or coat of armor, is protective clothing designed to absorb or deflect physical attacks. Historically used to protect military personnel, today it is also used by variou ...
or
vehicle armour
Military vehicles are commonly armoured (or armored; see spelling differences) to withstand the impact of shrapnel, bullets, shells, rockets, and missiles, protecting the personnel inside from enemy fire. Such vehicles include armoured fi ...
.
From the 1860s to 1950s, a major application of armour-piercing projectiles was to defeat the thick armour carried on many
warship
A warship or combatant ship is a naval ship that is built and primarily intended for naval warfare. Usually they belong to the armed forces of a state. As well as being armed, warships are designed to withstand damage and are usually faster ...
s and cause damage to their lightly-armoured interiors. From the 1920s onwards, armour-piercing weapons were required for
anti-tank warfare.
AP rounds smaller than 20 mm are intended for lightly-armoured targets such as body armour,
bulletproof glass
Bulletproof glass, ballistic glass, transparent armor, or bullet-resistant glass is a strong and optically transparent material that is particularly resistant to penetration by projectiles. Like any other material, it is not completely impenetr ...
, and lightly-armoured vehicles.
As tank armour improved during
World War II
World War II or the Second World War, often abbreviated as WWII or WW2, was a world war that lasted from 1939 to 1945. It involved the vast majority of the world's countries—including all of the great powers—forming two opposing ...
, anti-vehicle rounds began to use a smaller but dense penetrating body within a larger shell, firing at very high
muzzle velocity. Modern penetrators are long rods of dense material like
tungsten
Tungsten, or wolfram, is a chemical element with the symbol W and atomic number 74. Tungsten is a rare metal found naturally on Earth almost exclusively as compounds with other elements. It was identified as a new element in 1781 and first isol ...
or
depleted uranium (DU) that further improve the terminal ballistics.
History
The late 1850s saw the development of the
ironclad warship
An ironclad is a steam-propelled warship protected by iron or steel armor plates, constructed from 1859 to the early 1890s. The ironclad was developed as a result of the vulnerability of wooden warships to explosive or incendiary shells. Th ...
, which carried
wrought iron
Wrought iron is an iron alloy with a very low carbon content (less than 0.08%) in contrast to that of cast iron (2.1% to 4%). It is a semi-fused mass of iron with fibrous slag inclusions (up to 2% by weight), which give it a wood-like "grain" ...
armour of considerable thickness. This armour was practically immune to both the round
cast-iron
Cast iron is a class of iron–carbon alloys with a carbon content more than 2%. Its usefulness derives from its relatively low melting temperature. The alloy constituents affect its color when fractured: white cast iron has carbide impuriti ...
cannonballs then in use and to the recently developed
explosive shell
A shell, in a military context, is a projectile whose payload contains an explosive, incendiary, or other chemical filling. Originally it was called a bombshell, but "shell" has come to be unambiguous in a military context. Modern usage ...
.
The first solution to this problem was effected by
Major Sir W. Palliser, who, with the
Palliser shot
upPalliser shot, Mark I, for 9-inch Rifled Muzzle Loading (RML) gun
Palliser shot is an early British armour-piercing artillery projectile, intended to pierce the armour protection of warships being developed in the second half of the 19th centu ...
, invented a method of hardening the head of the pointed cast-iron shot.
By casting the projectile point downwards and forming the head in an iron mold, the hot metal was suddenly chilled and became intensely ''
hard
Hard may refer to:
* Hardness, resistance of physical materials to deformation or fracture
* Hard water, water with high mineral content
Arts and entertainment
* ''Hard'' (TV series), a French TV series
* Hard (band), a Hungarian hard rock supe ...
'' (resistant to deformation through a
Martensite phase transformation), while the remainder of the mold, being formed of sand, allowed the metal to cool slowly and the body of the shot to be made ''
tough''
[ (resistant to shattering).
These chilled iron shots proved very effective against wrought iron armour but were not serviceable against compound and steel armour,][ which was first introduced in the 1880s. A new departure, therefore, had to be made, and ]forged steel
Forging is a manufacturing process involving the shaping of metal using localized compressive forces. The blows are delivered with a hammer (often a power hammer) or a die. Forging is often classified according to the temperature at which it ...
rounds with points hardened by water took the place of the Palliser shot. At first, these forged-steel rounds were made of ordinary carbon steel, but as armour improved in quality, the projectiles followed suit.[
During the 1890s and subsequently, cemented steel armour became commonplace, initially only on the thicker armour of warships. To combat this, the projectile was formed of steel—forged or cast—containing both ]nickel
Nickel is a chemical element with symbol Ni and atomic number 28. It is a silvery-white lustrous metal with a slight golden tinge. Nickel is a hard and ductile transition metal. Pure nickel is chemically reactive but large pieces are slow ...
and chromium. Another change was the introduction of a soft metal cap over the point of the shell – so called "Makarov tips" invented by Russian admiral Stepan Makarov. This "cap" increased penetration by cushioning some of the impact shock and preventing the armour-piercing point from being damaged before it struck the armour face, or the body of the shell from shattering. It could also help penetration from an oblique angle by keeping the point from deflecting away from the armour face.
Types
Ships and vehicles
Explosive
An armour-piercing shell must withstand the shock of punching through armour plating
Military vehicles are commonly armoured (or armored; see spelling differences) to withstand the impact of shrapnel, bullets, shells, rockets, and missiles, protecting the personnel inside from enemy fire. Such vehicles include armoured fight ...
. Shells designed for this purpose have a greatly strengthened body with a specially hardened and shaped nose. One common addition to later shells is the use of a softer ring or cap of metal on the nose known as a penetrating cap, or armour-piercing cap. This lowers the initial shock of impact to prevent the rigid shell from shattering, as well as aiding the contact between the target armour and the nose of the penetrator to prevent the shell from bouncing off in glancing shots. Ideally, these caps have a blunt profile, which led to the use of a further thin aerodynamic cap to improve long-range ballistics. Armour-piercing shells may contain a small explosive charge known as a "bursting charge". Some smaller-calibre
In guns, particularly firearms, caliber (or calibre; sometimes abbreviated as "cal") is the specified nominal internal diameter of the gun barrel bore – regardless of how or where the bore is measured and whether the finished bore match ...
armour-piercing shells have an inert filling or an incendiary charge in place of the bursting charge.
Armour-piercing shells containing an explosive filling were initially termed "shell", distinguishing them from non-explosive "shot". This was largely a matter of British usage, relating to the 1877 invention of the first of the type, the Palliser shell with 1.5% high explosive (HE). By the start of World War II, armour-piercing shells with bursting charges were sometimes distinguished by the suffix "HE"; armour-piercing high explosive (APHE) was common in anti-tank shells of 75 mm calibre and larger, due to the similarity with the much larger naval armour piercing shells already in common use. As the war progressed, ordnance design evolved so that the bursting charges in APHE became ever smaller to non-existent, especially in smaller calibre shells, e.g. Panzergranate 39
The Panzergranate 39 or Pzgr. 39 was a German armor-piercing shell used during World War II. It was manufactured in various calibers and was the most common anti-tank shell used in German tank (German: ''Kampfwagenkanone''; shorted to ''KwK'') an ...
with only 0.2% high-explosive filling.
The primary shell types for modern anti-tank warfare are discarding-sabot kinetic energy penetrators, such as APDS. Full-calibre armour-piercing shells are no longer the primary method of conducting anti-tank warfare. They are still in use in artillery above 50 mm calibre, but the tendency is to use semi-armour-piercing high-explosive (SAPHE) shells, which have less anti-armour capability but far greater anti-materiel and anti-personnel effects. These still have ballistic caps, hardened bodies and base fuzes, but tend to have far thinner body material and much higher explosive contents (4–15%).
Common terms (and acronyms) for modern armour-piercing and semi-armour-piercing shells are:
*HEI-BF – High-explosive incendiary (base fuze)
*SAPHE – Semi-armour-piercing high-explosive
*SAPHEI – Semi-armour-piercing high-explosive incendiary
*SAPHEI-T – Semi-armour-piercing high-explosive incendiary tracer
World War I era
Shot and shell used before and during World War I
World War I (28 July 1914 11 November 1918), often abbreviated as WWI, was one of the deadliest global conflicts in history. Belligerents included much of Europe, the Russian Empire, the United States, and the Ottoman Empire, with fightin ...
were generally cast from special chromium (stainless) steel that was melted in pots. They were forged into shape afterward and then thoroughly annealed, the core bored at the rear and the exterior turned up in a lathe.[ The projectiles were finished in a similar manner to others described above. The final, or tempering treatment, which gave the required hardness/toughness profile (differential hardening) to the projectile body, was a closely guarded secret.][
The rear cavity of these projectiles was capable of receiving a small bursting charge of about 2% of the weight of the complete projectile; when this is used, the projectile is called a shell, not a shot. The high-explosive filling of the shell, whether fuzed or unfuzed, had a tendency to explode on striking armour in excess of its ability to perforate.][
]
World War II
During World War II, projectiles used highly alloyed steels containing nickel
Nickel is a chemical element with symbol Ni and atomic number 28. It is a silvery-white lustrous metal with a slight golden tinge. Nickel is a hard and ductile transition metal. Pure nickel is chemically reactive but large pieces are slow ...
-chromium- molybdenum, although in Germany, this had to be changed to a silicon
Silicon is a chemical element with the symbol Si and atomic number 14. It is a hard, brittle crystalline solid with a blue-grey metallic luster, and is a tetravalent metalloid and semiconductor. It is a member of group 14 in the periodic ta ...
-manganese
Manganese is a chemical element with the symbol Mn and atomic number 25. It is a hard, brittle, silvery metal, often found in minerals in combination with iron. Manganese is a transition metal with a multifaceted array of industrial alloy use ...
-chromium-based alloy when those grades became scarce. The latter alloy, although able to be hardened to the same level, was more brittle and had a tendency to shatter on striking highly sloped armour. The shattered shot lowered penetration, or resulted in total penetration failure; for ''armour-piercing high-explosive'' (APHE) projectiles, this could result in premature detonation of the high-explosive filling. Advanced and precise methods of differentially hardening a projectile were developed during this period, especially by the German armament industry. The resulting projectiles change gradually from high hardness (low toughness) at the head to high toughness (low hardness) at the rear and were much less likely to fail on impact.
APHE shells for tank guns, although used by most forces of this period, were not used by the British. The only British APHE projectile for tank use in this period was the ''Shell AP, Mk1'' for the 2 pdr anti-tank gun and this was dropped as it was found that the fuze tended to separate from the body during penetration. Even when the fuze did not separate and the system functioned correctly, damage to the interior was little different from the solid shot, and so did not warrant the additional time and cost of producing a shell version. They had been using APHE since the invention of the 1.5% high-explosive Palliser shell in the 1870s and 1880s, and understood the tradeoffs between reliability, damage, percentage of high explosive, and penetration, and deemed reliability and penetration to be most important for tank use. Naval APHE projectiles of this period, being much larger used a bursting charge of about 1–3% of the weight of the complete projectile,[ but in anti-tank use, the much smaller and higher velocity shells used only about 0.5% e.g. ]Panzergranate 39
The Panzergranate 39 or Pzgr. 39 was a German armor-piercing shell used during World War II. It was manufactured in various calibers and was the most common anti-tank shell used in German tank (German: ''Kampfwagenkanone''; shorted to ''KwK'') an ...
with only 0.2% high-explosive filling. This was due to much higher armour penetration requirements for the size of shell (e.g. over 2.5 times calibre in anti-tank use compared to below 1 times calibre for naval warfare). Therefore, in most APHE shells put to anti-tank use the aim of the bursting charge was to aid the number of fragments produced by the shell after armour penetration, the energy of the fragments coming from the speed of the shell after being fired from a high velocity anti-tank gun, as opposed to its bursting charge. There were some notable exceptions to this, with naval calibre shells put to use as anti-concrete and anti-armour shells, albeit with a much reduced armour penetrating ability. The filling was detonated by a rear-mounted delay fuze. The explosive used in APHE projectiles needs to be highly insensitive to shock to prevent premature detonation. The US forces normally used the explosive Explosive D
Dunnite, also known as Explosive D or systematically as ammonium picrate, is an explosive developed in 1906 by US Army Major Beverly W. Dunn, who later served as the chief inspector of the Bureau of Transportation Explosives. Ammonium picrate is ...
, otherwise known as ammonium picrate, for this purpose. Other combatant forces of the period used various explosives, suitably desensitized (usually by the use of waxes mixed with the explosive).
HEAT
High-explosive anti-tank
High-explosive anti-tank (HEAT) is the effect of a shaped charge explosive that uses the Munroe effect to penetrate heavy armor. The warhead functions by having an explosive charge collapse a metal liner inside the warhead into a high-velocity ...
(HEAT) shells are a type of shaped charge
A shaped charge is an explosive charge shaped to form an explosively formed penetrator (EFP) to focus the effect of the explosive's energy. Different types of shaped charges are used for various purposes such as cutting and forming metal, ini ...
used to defeat armoured vehicles. They are very efficient at defeating plain steel armour but less so against later composite and reactive armour
Reactive armour is a type of vehicle armour that reacts in some way to the impact of a weapon to reduce the damage done to the vehicle being protected. It is most effective in protecting against shaped charges and specially hardened kinetic ener ...
. The effectiveness of such shells is independent of velocity, and hence the range: it is as effective at 1000 metres as at 100 metres. This is because HEAT shells do not lose penetrating ability over distance. The speed can even be zero in the case where a soldier places a magnetic mine onto a tank's armour plate. A HEAT charge is most effective when detonated at a certain, optimal distance in front of a target and HEAT shells are usually distinguished by a long, thin nose probe protruding in front of the rest of the shell and detonating it at a correct distance, e.g., PIAT
The Projector, Infantry, Anti Tank (PIAT) Mk I was a British man-portable anti-tank weapon developed during the Second World War. The PIAT was designed in 1942 in response to the British Army's need for a more effective infantry anti-tank weapon ...
bomb. HEAT shells are less effective when spun, as when fired from a rifled gun.
HEAT shells were developed during World War II as a munition made of an explosive shaped charge that uses the Munroe effect
A shaped charge is an explosive charge shaped to form an explosively formed penetrator (EFP) to focus the effect of the explosive's energy. Different types of shaped charges are used for various purposes such as cutting and forming metal, ini ...
to create a very high-velocity particle stream of metal in a state of superplasticity
In materials science, superplasticity is a state in which solid crystalline material is deformed well beyond its usual breaking point, usually over about 600% during tensile deformation. Such a state is usually achieved at high homologous tempe ...
, and used to penetrate solid vehicle armour
Military vehicles are commonly armoured (or armored; see spelling differences) to withstand the impact of shrapnel, bullets, shells, rockets, and missiles, protecting the personnel inside from enemy fire. Such vehicles include armoured fi ...
. HEAT rounds caused a revolution in anti-tank warfare when they were first introduced in the later part of World War II. One infantryman could effectively destroy any extant tank with a handheld weapon, thereby dramatically altering the nature of mobile operations. During World War II, weapons using HEAT warheads were known as having a ''hollow charge'' or ''shaped charge'' warhead.
Claims for priority of invention are difficult to resolve due to subsequent historic interpretations, secrecy, espionage, and international commercial interest. Shaped-charge warheads were promoted internationally by the Swiss inventor Henry Mohaupt Wolfdieter Hans-Jochem Mohaupt, known as Heinrich Mohaupt, in the U.S. Henry (Hans) Mohaupt (August 16, 1915 – May 20, 2001) was a Swiss American inventor. He first demonstrated and exhibited shaped charge warheads internationally before the Secon ...
, who exhibited the weapon before World War II. Before 1939, Mohaupt demonstrated his invention to British and French ordnance authorities. During the war, the French communicated Henry Mohaupt's technology to the U.S. Ordnance Department, who invited him to the US, where he worked as a consultant on the bazooka
Bazooka () is the common name for a man-portable recoilless anti-tank rocket launcher weapon, widely deployed by the United States Army, especially during World War II. Also referred to as the "stovepipe", the innovative bazooka was among the ...
project. By mid-1940, Germany had introduced the first HEAT round to be fired by a gun, the 7.5 cm fired by the Kw.K.37 L/24 of the Panzer IV
The ''Panzerkampfwagen'' IV (Pz.Kpfw. IV), commonly known as the ''Panzer'' IV, was a German medium tank developed in the late 1930s and used extensively during the Second World War. Its ordnance inventory designation was Sd.Kfz. 161.
The Pan ...
tank and the Stug III self-propelled gun (7.5 cm Gr.38 Hl/A, later editions B and C). In mid-1941, Germany started producing HEAT rifle grenades, first issued to paratrooper
A paratrooper is a military parachutist—someone trained to parachute into a military operation, and usually functioning as part of an airborne force. Military parachutists (troops) and parachutes were first used on a large scale during Worl ...
s and by 1942 to regular army units. In 1943, the ''Püppchen'', ''Panzerschreck
''Panzerschreck'' (lit. "tank fright", "tank's fright" or "tank's bane") was the popular name for the ''Raketenpanzerbüchse'' 54 ("Rocket Anti-armor Rifle Model 54", abbreviated to RPzB 54), an 88 mm reusable anti-tank rocket launcher dev ...
'' and ''Panzerfaust
The ''Panzerfaust'' (, "armour fist" or "tank fist", plural: ''Panzerfäuste'') was a development family of single-shot man-portable anti-tank systems developed by Nazi Germany during World War II. The weapons were the first single-use light an ...
'' were introduced. The Panzerfaust and Panzerschreck or 'tank terror' gave the German infantryman the ability to destroy any tank on the battlefield from 50–150 m with relative ease of use and training, unlike the UK PIAT.
The first British HEAT weapon to be developed and issued was a rifle grenade
A rifle grenade is a grenade that uses a rifle-based launcher to permit a longer effective range than would be possible if the grenade were thrown by hand.
The practice of projecting grenades with rifle-mounted launchers was first widely used dur ...
using a -inch (63.5 mm) cup launcher on the end of the barrel; the British No. 68 AT grenade issued to the British army in 1940. By 1943, the PIAT was developed; a combination of a HEAT warhead and a spigot mortar
A mortar is usually a simple, lightweight, man-portable, muzzle-loaded weapon, consisting of a smooth-bore (although some models use a rifled barrel) metal tube fixed to a base plate (to spread out the recoil) with a lightweight bipod mount and ...
delivery system. While cumbersome, the weapon at last allowed British infantry to engage armour at range; the earlier magnetic hand-mines and grenades required them to approach suicidally close. During World War II, the British referred to the Munroe effect as the ''cavity effect on explosives''.
Non-explosive
Armour-piercing solid shot for cannons may be simple, or composite, solid projectiles but tend to also combine some form of incendiary capability with that of armour-penetration. The incendiary compound is normally contained between the cap and penetrating nose, within a hollow at the rear, or a combination of both. If the projectile also uses a tracer, the rear cavity is often used to house the tracer compound. For larger-calibre projectiles, the tracer may instead be contained within an extension of the rear sealing plug. Common abbreviations for solid (non-composite/hardcore) cannon-fired shot are; ''AP'', ''AP-T'', ''API'' and ''API-T''; where "T" stands for "tracer" and "I" for "incendiary". More complex, composite projectiles containing explosives and other ballistic devices tend to be referred to as armour-piercing shells.
Early rounds
Early WWII-era uncapped armour-piercing projectiles fired from high-velocity guns were able to penetrate about twice their calibre at close range (100 m). At longer ranges (500–1,000 m), this dropped 1.5–1.1 calibres due to the poor ballistic shape and higher drag of the smaller-diameter early projectiles. In January 1942 a process was developed by Arthur E. Schnell for 20 mm and 37 mm armour piercing rounds to press bar steel under 500 tons of pressure that made more even "flow-lines" on the tapered nose of the projectile, which allowed the shell to follow a more direct nose first path to the armour target. Later in the conflict, APCBC fired at close range (100 m) from large-calibre, high-velocity guns (75–128 mm) were able to penetrate a much greater thickness of armour in relation to their calibre (2.5 times) and also a greater thickness (2–1.75 times) at longer ranges (1,500–2,000 m).
In an effort to gain better aerodynamics, AP rounds were given ballistic cap
Armour-piercing, capped, ballistic capped (APCBC) is a type of configuration for armour-piercing ammunition introduced in the 1930s to improve the armour-piercing capabilities of both naval and anti-tank guns. The configuration consists of an ar ...
s to reduce drag and improve impact velocities at medium to long range. The hollow ballistic cap would break away when the projectile hit the target. These rounds were classified as armour-piercing ballistic capped (APBC) rounds.
Armour-piercing, capped projectiles had been developed in the early 1900s, and were in service with both the British and German fleets during World War I. The shells generally consisted of a nickel steel
Nickel is a chemical element with symbol Ni and atomic number 28. It is a silvery-white lustrous metal with a slight golden tinge. Nickel is a hard and ductile transition metal. Pure nickel is chemically reactive but large pieces are slow to r ...
body that contained the burster charge and was fitted with a hardened steel nose intended to penetrate heavy armour. Striking a hardened steel plate at high velocity imparted significant force to the projectile and standard armour-piercing shells had a tendency to shatter instead of penetrating, especially at oblique angles, so shell designers added a mild steel cap to the nose of the shells. The more flexible mild steel would deform on impact and reduce the shock transmitted to the projectile body. Shell design varied, with some fitted with hollow caps and others with solid ones.
Since the best-performance penetrating caps were not very aerodynamic, an additional ballistic cap
Armour-piercing, capped, ballistic capped (APCBC) is a type of configuration for armour-piercing ammunition introduced in the 1930s to improve the armour-piercing capabilities of both naval and anti-tank guns. The configuration consists of an ar ...
was later fitted to reduce drag. The resulting rounds were classified as armour-piercing capped ballistic capped (APCBC). The hollow ballistic cap gave the rounds a sharper point which reduced drag and broke away on impact.[Popular Science, December 1944, pg 126](_blank)
illustration at bottom of page on working principle of APCBC type shell
APDS
An important armour-piercing development was the armour-piercing discarding sabot
Sabot may refer to:
* Sabot (firearms), disposable supportive device used in gunpowder ammunitions to fit/patch around a sub-caliber projectile
* Sabot (shoe), a type of wooden shoe
People
* Dick Sabot (1944–2005), American economist and busi ...
(APDS). An early version was developed by engineers working for the French Edgar Brandt company, and was fielded in two calibres (75 mm/57 mm for the 75 mm Mle1897/33 anti-tank gun, 37 mm/25 mm for several 37 mm gun types) just before the French-German armistice of 1940. The Edgar Brandt engineers, having been evacuated to the United Kingdom, joined ongoing APDS development efforts there, culminating in significant improvements to the concept and its realization. The APDS projectile type was further developed in the United Kingdom between 1941 and 1944 by L. Permutter and S. W. Coppock, two designers with the Armaments Research Department. In mid-1944 the APDS projectile was first introduced into service for the UK's QF 6-pdr anti-tank gun and later in September 1944 for the QF-17 pdr anti-tank gun. The idea was to use a stronger and denser penetrator material with smaller size and hence less drag, to allow increased impact velocity and armour penetration.
The armour-piercing concept calls for more penetration capability than the target's armour thickness. The penetrator is a pointed mass of high-density material that is designed to retain its shape and carry the maximum possible amount of energy as deeply as possible into the target. Generally, the penetration capability of an armour-piercing round increases with the projectile's kinetic energy and also with concentration of that energy in a small area. Thus, an efficient means of achieving increased penetrating power is increased velocity for the projectile. However, projectile impact against armour at higher velocity causes greater levels of shock. Materials have characteristic maximum levels of shock capacity, beyond which they may shatter, or otherwise disintegrate. At relatively high impact velocities, steel is no longer an adequate material for armour-piercing rounds. Tungsten and tungsten alloys are suitable for use in even higher-velocity armour-piercing rounds, due to their very high shock tolerance and shatter resistance, and to their high melting and boiling temperatures. They also have very high density. Aircraft and tank rounds sometimes use a core of depleted uranium. Depleted-uranium penetrators have the advantage of being pyrophoric
A substance is pyrophoric (from grc-gre, πυροφόρος, , 'fire-bearing') if it ignites spontaneously in air at or below (for gases) or within 5 minutes after coming into contact with air (for liquids and solids). Examples are organolit ...
and self-sharpening on impact, resulting in intense heat and energy focused on a minimal area of the target's armour. Some rounds also use explosive or incendiary tips to aid in the penetration of thicker armour. High explosive incendiary/armour piercing ammunition combines a tungsten carbide
Tungsten carbide (chemical formula: WC) is a chemical compound (specifically, a carbide) containing equal parts of tungsten and carbon atoms. In its most basic form, tungsten carbide is a fine gray powder, but it can be pressed and formed into ...
penetrator with an incendiary and explosive tip.
Energy is concentrated by using a reduced-diameter tungsten shot, surrounded by a lightweight outer carrier, the ''sabot'' (a French word for a wooden shoe). This combination allows the firing of a smaller diameter (thus lower mass/aerodynamic resistance/penetration resistance) projectile with a larger area of expanding-propellant "push", thus a greater propelling force and resulting kinetic energy. Once outside the barrel, the sabot is stripped off by a combination of centrifugal force
In Newtonian mechanics, the centrifugal force is an inertial force (also called a "fictitious" or "pseudo" force) that appears to act on all objects when viewed in a rotating frame of reference. It is directed away from an axis which is parall ...
and aerodynamic force, giving the shot low drag in flight. For a given calibre, the use of APDS ammunition can effectively double the anti-tank performance of a gun.
APFSDS
An armour-piercing fin-stabilized discarding sabot
Armour-piercing fin-stabilized discarding sabot (APFSDS), long dart penetrator, or simply dart ammunition, is a type of kinetic energy penetrator ammunition used to attack modern vehicle armour. As an armament for main battle tanks, it succeeds ...
(APFSDS) projectile uses the sabot principle with fin (drag) stabilization. A long, thin sub-projectile has increased sectional density
Density (volumetric mass density or specific mass) is the substance's mass per unit of volume. The symbol most often used for density is ''ρ'' (the lower case Greek letter rho), although the Latin letter ''D'' can also be used. Mathematical ...
and thus penetration potential. However, once a projectile has a length-to-diameter ratio greater than 10 (less for higher density projectiles), spin stabilization becomes ineffective. Instead, aerodynamic lift stabilization is used, by means of fins attached to the base of the sub-projectile, making it look like a large metal arrow.
Large calibre APFSDS projectiles are usually fired from smooth-bore (unrifled) barrels, though they can be and often are fired from rifled guns. This is especially true when fired from small to medium calibre weapon systems. APFSDS projectiles are usually made from high-density metal alloys, such as tungsten
Tungsten, or wolfram, is a chemical element with the symbol W and atomic number 74. Tungsten is a rare metal found naturally on Earth almost exclusively as compounds with other elements. It was identified as a new element in 1781 and first isol ...
heavy alloys (WHA) or depleted uranium (DU); maraging steel
Maraging steels (a portmanteau of " martensitic" and "aging") are steels that are known for possessing superior strength and toughness without losing ductility. ''Aging'' refers to the extended heat-treatment process. These steels are a special cla ...
was used for some early Soviet projectiles. DU alloys are cheaper and have better penetration than others, as they are denser and self-sharpening. Uranium is also pyrophoric
A substance is pyrophoric (from grc-gre, πυροφόρος, , 'fire-bearing') if it ignites spontaneously in air at or below (for gases) or within 5 minutes after coming into contact with air (for liquids and solids). Examples are organolit ...
and may become opportunistically incendiary, especially as the round shears past the armour exposing non-oxidized metal, but both the metal's fragments and dust contaminate the battlefield with toxic hazards. The less toxic WHAs are preferred in most countries except the US and Russia.
APCR and HVAP
Armour-piercing, composite rigid (APCR) in British nomenclature
Nomenclature (, ) is a system of names or terms, or the rules for forming these terms in a particular field of arts or sciences. The principles of naming vary from the relatively informal conventions of everyday speech to the internationally ag ...
, high-velocity armour-piercing (HVAP) in US nomenclature, and 'hard core ammunition' (german: Hartkernmunition) in German nomenclature, is a projectile which has a core of high-density hard material, such as tungsten carbide
Tungsten carbide (chemical formula: WC) is a chemical compound (specifically, a carbide) containing equal parts of tungsten and carbon atoms. In its most basic form, tungsten carbide is a fine gray powder, but it can be pressed and formed into ...
, surrounded by a full-bore shell of a lighter material (e.g., an aluminium
Aluminium (aluminum in American and Canadian English) is a chemical element with the symbol Al and atomic number 13. Aluminium has a density lower than those of other common metals, at approximately one third that of steel. I ...
alloy). However, the low sectional density
Sectional density (often abbreviated SD) is the ratio of an object's mass to its cross sectional area with respect to a given axis. It conveys how well an object's mass is distributed (by its shape) to overcome resistance along that axis.
Secti ...
of the APCR resulted in high aerodynamic drag. Tungsten compounds such as tungsten carbide were used in small quantities of inhomogeneous and discarded sabot round, but that element was in short supply in most places. Most APCR projectiles are shaped like the standard APCBC round (although some of the German ''Pzgr.'' 40 and some Soviet designs resemble a stubby arrow), but the projectile is lighter: up to half the weight of a standard AP round of the same calibre. The lighter weight allows a higher muzzle velocity. The kinetic energy of the round is concentrated in the core and hence on a smaller impact area, improving the penetration of the target armour. To prevent shattering on impact, a shock-buffering cap is placed between the core and the outer ballistic shell as with APC rounds. However, because the round is lighter but still the same overall size it has poorer ballistic qualities, and loses velocity and accuracy at longer ranges. The APCR was superseded by the APDS, which dispensed with the outer light alloy shell once the round had left the barrel. The concept of a heavy, small-diameter penetrator encased in light metal was later employed in small-arms armour-piercing incendiary and HEIAP rounds.
APCNR
Armour-piercing, composite non-rigid (APCNR) in British nomenclature
Nomenclature (, ) is a system of names or terms, or the rules for forming these terms in a particular field of arts or sciences. The principles of naming vary from the relatively informal conventions of everyday speech to the internationally ag ...
, or 'flange projectile' ( sv, Flänsprojektil) in Swedish nomenclature, is a sub-calibre projectile used in squeeze bore
A squeeze bore, alternatively taper-bore, cone barrel or conical barrel, is a weapon where the internal barrel diameter progressively decreases towards the muzzle resulting in a reduced final internal diameter. These weapons are used in conjuncti ...
weapons (also known as "tapered bore" weapons) using the Gerlich principle. This projectile design is based on the same design as the APCR - a high-density core within a shell of soft iron or another alloy - but it is fired by a gun with a tapered barrel, either a taper in a fixed barrel or a final added section. The projectile is initially full-bore, but the outer shell is deformed as it passes through the taper. Flanges or studs are swaged down in the tapered section so that as it leaves the muzzle the projectile has a smaller overall cross-section. This gives it better flight characteristics with a higher sectional density, and the projectile retains velocity better at longer ranges than an undeformed shell of the same weight. As with the APCR, the kinetic energy of the round is concentrated at the core of impact. The initial velocity of the round is greatly increased by the decrease of barrel cross-sectional area toward the muzzle, resulting in a commensurate increase in velocity of the expanding propellant gases.
The Germans deployed their initial design as a light anti-tank weapon, '' 2,8 cm schwere Panzerbüchse 41'', early in World War II
World War II or the Second World War, often abbreviated as WWII or WW2, was a world war that lasted from 1939 to 1945. It involved the vast majority of the world's countries—including all of the great powers—forming two opposing ...
, and followed by the 4.2 cm Pak 41
The 4.2 cm Pak 41 (Panzerabwehrkanone —"anti-tank gun") was a light anti-tank gun issued to German airborne units in World War II. This gun was externally similar to the 3.7 cm Pak 36, using a modified version of the latter's ca ...
and 7.5 cm Pak 41
The 7.5 cm Pak 41 was one of the last Nazi Germany, German anti-tank guns brought into service and used in World War II and notable for being one of the largest anti-tank guns to rely on the Squeeze bore, Gerlich principle (pioneered by the G ...
. Although HE rounds were also put into service, they weighed only 93 grams and had low effectiveness. The German taper was a fixed part of the barrel.
In contrast, the British used the Littlejohn squeeze-bore adaptor, which could be attached or removed as necessary. The adaptor extended the usefulness of armoured cars and light tanks, which could not be upgraded with any gun larger than the QF 2 pdr. Although a full range of shells and shot could be used, changing an adaptor during a battle is usually impractical.
The APCNR was superseded by the APDS design which was compatible with non-tapered barrels.
Aerial bombs
Armour-piercing bombs dropped by aircraft were used during World War II
World War II or the Second World War, often abbreviated as WWII or WW2, was a world war that lasted from 1939 to 1945. It involved the vast majority of the world's countries—including all of the great powers—forming two opposing ...
against capital and other armoured ships. Among the bombs used by the Imperial Japanese Navy
The Imperial Japanese Navy (IJN; Kyūjitai: Shinjitai: ' 'Navy of the Greater Japanese Empire', or ''Nippon Kaigun'', 'Japanese Navy') was the navy of the Empire of Japan from 1868 to 1945, when it was dissolved following Japan's surrend ...
in the attack on Pearl Harbor
The attack on Pearl HarborAlso known as the Battle of Pearl Harbor was a surprise military strike by the Imperial Japanese Navy Air Service upon the United States against the naval base at Pearl Harbor in Honolulu, Territory of Hawaii ...
were armour-piercing bombs, modified from naval shells, which succeeded in sinking the battleship . The ''Luftwaffe
The ''Luftwaffe'' () was the aerial-warfare branch of the German ''Wehrmacht'' before and during World War II. Germany's military air arms during World War I, the ''Luftstreitkräfte'' of the Imperial Army and the '' Marine-Fliegerabtei ...
s PC 1400
The PC 1400 (Panzersprengbombe Cylindrisch) or ''cylindrical armor-piercing explosive bomb'' in English was an armor-piercing bomb used by the Luftwaffe during World War II.
History
The PC series of bombs differed from the SC series because the ...
armour-piercing bomb and the derived Fritz X
Fritz X was the most common name for a German guided anti-ship glide bomb used during World War II. ''Fritz X'' was the world's first precision guided weapon deployed in combat and the first to sink a ship in combat. ''Fritz X'' was a nickname us ...
precision-guided bomb were able to penetrate of armour. The ''Luftwaffe'' also developed a series of bombs propelled by rockets
A rocket (from it, rocchetto, , bobbin/spool) is a vehicle that uses jet propulsion to accelerate without using the surrounding air. A rocket engine produces thrust by reaction to exhaust expelled at high speed. Rocket engines work entirely ...
to assist in penetrating the armour of ships and similar targets.
Small arms
Armour-piercing rifle and pistol cartridges are usually built around a penetrator of hardened steel
The term hardened steel is often used for a medium or high carbon steel that has been given heat treatment and then quenching followed by tempering. The quenching results in the formation of metastable martensite, the fraction of which is reduced ...
, tungsten
Tungsten, or wolfram, is a chemical element with the symbol W and atomic number 74. Tungsten is a rare metal found naturally on Earth almost exclusively as compounds with other elements. It was identified as a new element in 1781 and first isol ...
, or tungsten carbide
Tungsten carbide (chemical formula: WC) is a chemical compound (specifically, a carbide) containing equal parts of tungsten and carbon atoms. In its most basic form, tungsten carbide is a fine gray powder, but it can be pressed and formed into ...
, and such cartridges are often called 'hard-core bullets'. Rifle armour-piercing ammunition generally carries its hardened penetrator within a copper
Copper is a chemical element with the symbol Cu (from la, cuprum) and atomic number 29. It is a soft, malleable, and ductile metal with very high thermal and electrical conductivity. A freshly exposed surface of pure copper has a pinkis ...
or cupronickel
Cupronickel or copper-nickel (CuNi) is an alloy of copper that contains nickel and strengthening elements, such as iron and manganese. The copper content typically varies from 60 to 90 percent. (Monel is a nickel-copper alloy that contains a minimu ...
jacket, similar to the jacket which would surround lead
Lead is a chemical element with the symbol Pb (from the Latin ) and atomic number 82. It is a heavy metal that is denser than most common materials. Lead is soft and malleable, and also has a relatively low melting point. When freshly cu ...
in a conventional projectile. Upon impact on a hard target, the copper case is destroyed, but the penetrator continues its motion and penetrates the target. Armour-piercing ammunition for pistols has also been developed and uses a design similar to the rifle ammunition. Some small ammunition, such as the FN 5.7mm round, is inherently capable at piercing armour, being of a small calibre and very high velocity. The entire projectile is not normally made of the same material as the penetrator because the physical characteristics that make a good penetrator (i.e. extremely tough, hard metal) make the material equally harmful to the barrel of the gun firing the cartridge.
Defense
Most modern active protection systems (APS) are unlikely to be able to defeat full-calibre AP rounds fired from a large-calibre anti-tank gun, because of the high mass of the shot, its rigidity, short overall length, and thick body. The APS uses fragmentation warheads or projected plates, and both are designed to defeat the two most common anti-armour projectiles in use today: HEAT and kinetic energy penetrator. Defeating HEAT projectiles can occur by damaging or detonating their explosive filling, or by damaging a shaped charge liner or fuzing system. Defeating kinetic energy projectiles can occur by inducing changes in yaw or pitch or by fracturing the rod.
See also
* Raufoss Mk 211
The Raufoss Mk 211 is a .50 BMG (12.7×99mm NATO) multi-purpose anti-materiel high-explosive incendiary/armor-piercing ammunition projectile produced by Nammo under the model name ''NM140 MP''. It is commonly referred to as ''multipurpose'' or '' ...
* Panzergranate 39
The Panzergranate 39 or Pzgr. 39 was a German armor-piercing shell used during World War II. It was manufactured in various calibers and was the most common anti-tank shell used in German tank (German: ''Kampfwagenkanone''; shorted to ''KwK'') an ...
Notes
References
Bibliography
*
*
External links
*{{YouTube, c=UCxV8JseLCWxRwLVd1ykivvg, SY Simulations
Naval artillery
Projectiles
Vehicle armour