Phenomena
Acoustic emission is the transient elastic waves within a material, caused by the rapid release of localized stress energy. An ''event'' source is the phenomenon which releases elastic energy into the material, which then propagates as an elastic wave. Acoustic emissions can be detected in frequency ranges under 1 kHz, and have been reported at frequencies up to 100 MHz, but most of the released energy is within the 1 kHz to 1 MHz range. Rapid stress-releasing events generate a spectrum of stress waves starting at 0 Hz, and typically falling off at several MHz. The three major applications of AE techniques are: 1) source location – determine the locations where an ''event'' source occurred; 2) material mechanical performance – evaluate and characterize materials/structures; and 3) health monitoring – monitor the safe operation of a structure, for example, bridges, pressure containers, and pipe lines, etc. More recent research has focused on using AE to not only locate but also to characterise the source mechanisms such as crack growth, friction, delamination, matrix cracking, etc. This would give AE the ability to tell the end user what source mechanism is present and allow them to determine whether structural repairs are necessary. AE can be related to an irreversible release of energy. It can also be generated from sources not involving material failure, includingUses
The application of acoustic emission to non-destructive testing of materials typically takes place between 20 kHz and 1 MHz. Unlike conventional ultrasonic testing, AE tools are designed for monitoring acoustic emissions produced by the material during failure or stress, and not on the material's effect on externally generated waves. Part failure can be documented during unattended monitoring. The monitoring of the level of AE activity during multiple load cycles forms the basis for many AE safety inspection methods, that allow the parts undergoing inspection to remain in service. The technique is used, for example, to study the formation of cracks during the welding process, as opposed to locating them after the weld has been formed with the more familiar ultrasonic testing technique. In a material under active stress, such as some components of an airplane during flight, transducers mounted in an area can detect the formation of a crack at the moment it begins propagating. A group of transducers can be used to record signals, then locate the precise area of their origin by measuring the time for the sound to reach different transducers. The technique is also valuable for detecting cracks forming in pressure vessels and pipelines transporting liquids under high pressures. Also, this technique is used for estimation of corrosion in reinforced concrete structures.Estimation of corrosion in reinforced concrete by electrochemical techniques and acoustic emission, journal of advanced concrete technology, vol. 3, No 1, 137–144, February 2005 In addition to non-destructive testing, acoustic emission monitoring has applications in process monitoring. Applications where acoustic emission monitoring has successfully been used include detecting anomalies in fluidized beds, and end points in batch granulation. Standards for the use of acoustic emission for non-destructive testing of pressure vessels have been developed by theSee also
* Ultrasonic homogenizer *References
External links and further reading