7.62 UKM
   HOME

TheInfoList



OR:

The 7.62mm UKM .62×57mmis a specialized
rimless A rim is an external flange that is machined, cast, molded, stamped, or pressed around the bottom of a firearms cartridge. Thus, rimmed cartridges are sometimes called "flanged" cartridges. Almost all cartridges feature an extractor or headspacing ...
bottlenecked centerfire cartridge developed for long-range
rifle A rifle is a long-barreled firearm designed for accurate shooting, with a barrel that has a helical pattern of grooves ( rifling) cut into the bore wall. In keeping with their focus on accuracy, rifles are typically designed to be held with ...
s. The commercially successful
.338 Lapua Magnum The .338 Lapua Magnum (8.6×70 mm or 8.58×70 mm) is a rimless, bottlenecked, centerfire rifle cartridge. It was developed during the 1980s as a high-powered, long-range cartridge for military snipers. It was used in the War in Afghanistan and ...
cartridge has functioned as the parent case for the 7.62mm UKM, which is essentially a necked-down shortened version of the .338 Lapua Magnum. The .338 cartridge case was used for this since it has the capability to operate with high chamber pressures which, combined with smaller and hence lighter
bullet A bullet is a kinetic projectile, a component of firearm ammunition that is shot from a gun barrel. Bullets are made of a variety of materials, such as copper, lead, steel, polymer, rubber and even wax. Bullets are made in various shapes and co ...
s result in high muzzle velocities.


History

The 7.62mm UKM was developed by Michael Uekötter and C.I.P. (
Commission Internationale Permanente pour l'Epreuve des Armes à Feu Portatives Commission or commissioning may refer to: Business and contracting * Commission (remuneration), a form of payment to an agent for services rendered ** Commission (art), the purchase or the creation of a piece of art most often on behalf of anothe ...
) certified in 2002, so it is an officially registered and sanctioned member of the Finnish "family" of super magnum rifle cartridges. The 7.62mm UKM is not commercially available today and currently (2008) exists only as a C.I.P. datasheet. It is however still used by a few shooters who produce the cases from .338 Lapua Magnum brass by reshaping the shoulder and neck, and
handloading Handloading, or reloading, is the practice of making firearm cartridges by assembling the individual components (case, primer, propellant, and projectile), rather than purchasing mass-assembled, factory-loaded ammunition. The term ''hand ...
it with .30 calibre bullets.


Cartridge dimensions

The 7.62mm UKM has a 5.84 ml (90 grains) H2O cartridge case capacity. The exterior shape of the Lapua Magnum case was designed to promote reliable case feeding and extraction in
bolt-action Bolt-action is a type of manual firearm action that is operated by ''directly'' manipulating the bolt via a bolt handle, which is most commonly placed on the right-hand side of the weapon (as most users are right-handed). Most bolt-action ...
rifles and machineguns alike, under extreme conditions. 7.62mm UKM maximum C.I.P. cartridge dimensions. All sizes in millimeters (mm). Americans would define the shoulder angle at alpha/2 ≈ 20 degrees. The common
rifling In firearms, rifling is machining helical grooves into the internal (bore) surface of a gun's barrel for the purpose of exerting torque and thus imparting a spin to a projectile around its longitudinal axis during shooting to stabilize the pro ...
twist rate for this cartridge is 254 mm (1 in 10 in), 6 grooves, Ø lands = 7.62 mm, Ø grooves = 7.82 mm, land width = 2.79 mm and the primer type is large rifle magnum. According to the official C.I.P. (Commission Internationale Permanente pour l'Epreuve des Armes à Feu Portatives) rulings the 7.62mm UKM can handle up to Pmax piezo pressure. This now prevails over the C.I.P. decisions and tables edition 2003, that rated the 7.62mm UKM at Pmax maximum piezo pressure. In C.I.P. regulated countries every rifle cartridge combo has to be proofed at 125% of this maximum C.I.P. pressure to certify for sale to consumers. This means that 7.62mm UKM chambered arms in C.I.P. regulated countries are currently (2015) proof tested at PE piezo pressure. This for rifles very high maximum allowed chamber pressure level indicates that the cases of the .300 and .338 Lapua Magnum and 7.62mm UKM are built extremely sturdy to cope with this for rifles very high operating pressure. The large boltface combined with the high 440 MPa maximum pressure makes that the 7.62mm UKM should only be chambered in rifles that are capable of handling such large and fierce cartridges and thus high bolt thrust safely. Chambering such powerful super magnum cartridges in rifles intended for normal magnum rifle cartridges and using 440 MPa loads can cause serious or fatal injury to the shooter and bystanders.


Additional information

The ''7.62 mm UKM''’s main appeal is long-range shooting. Due to the large case capacity in relation to the 7.62 mm (.308 inch) calibre bore size the round is harsh on barrels like other .300 Magnum cartridges. In an Austrian based online forum "Leuchtspur.eu" the inventor Michael Uekötter claimed he needed to replace his ''Krieger'' custom barrel after more than 4,000 shots with the 7.62 mm UKM. A lot of thorough barrel cleaning (after every 5 to 10 shots) and carefully avoiding long strings of shots help to minimize barrel wear. The American .300 Dakota proprietary cartridge, based on the
.404 Jeffery The .404 Jeffery is a rifle cartridge designed for hunting large, dangerous game animals, such as the " Big Five" (elephant, rhino, cape buffalo, lion and leopard) of Africa. The cartridge is standardized by the C.I.P. and is also known as .404 ...
case, is probably the closest (as of 2008) commercially available ballistic twin of the 7.62 mm UKM.Conley Precision Cartridge 300 Dakota Ballistic Tables
/ref> The .300 Dakota is however a
rebated rim A rim is an external flange that is machined, cast, molded, stamped, or pressed around the bottom of a firearms cartridge. Thus, rimmed cartridges are sometimes called "flanged" cartridges. Almost all cartridges feature an extractor or headspacing ...
cartridge.


See also

*
List of rifle cartridges List of rifle cartridges, by primer type, calibre and name. File:Cartridge Sample 2.jpg, 350px, From left to right: 1 .17 HM2,2 .17 HMR, 2.5 .17 wsm, 3 .22LR, 4 .22 WMR, 5 .17/23 SMc, 6 5mm/35 SMc, 7 .22 Hornet, 8 .223 Remington, 9 .223 WSSM ...
* 7 mm caliber *
.300 Lapua Magnum The .300 Lapua Magnum (7.62×70mm) is a specialized rimless bottlenecked centerfire cartridge developed for long-range rifles. The commercially successful .338 Lapua Magnum cartridge has functioned as the parent case for the .300 Lapua Magnum, ...
*
.338 Lapua Magnum The .338 Lapua Magnum (8.6×70 mm or 8.58×70 mm) is a rimless, bottlenecked, centerfire rifle cartridge. It was developed during the 1980s as a high-powered, long-range cartridge for military snipers. It was used in the War in Afghanistan and ...


References

{{Reflist * C.I.P. CD-ROM edition 2003 * C.I.P. decisions, texts and tables
free current C.I.P. CD-ROM version download (ZIP and RAR format)


External links and sources

*
QuickLOAD QuickLOAD is an internal ballistics predictor computer program for firearms. For computations apart from other parameters, * the cartridge * the projectile (bullet) * the gun barrel length * the cartridge overall length * the propellant type and ...
internal ballistics predictor computer program for fire arms
C.I.P. TDCC sheet 7,62 UKM
Pistol and rifle cartridges Magnum rifle cartridges