444 Marlin

The .444 Marlin (10.9×57mmR) is a rifle cartridge designed in 1964 by Marlin Firearms and Remington Arms. It was designed to fill in a gap left by the older .45-70 when that cartridge was not available in any new lever-action rifles; at the time it was the largest lever-action cartridge available. The .444 resembles a lengthened .44 Magnum and provides a significant increase in velocity. It is usually used in the Marlin 444 lever-action rifle.

History

In the mid-1960s the .45-70 had all but disappeared from the American marketplace. There was no big-bore cartridge available in a lever-action rifle in current production, so Marlin decided to create a new cartridge to fill this empty niche. They created what is essentially an elongated version of the .44 Magnum by making it nearly an inch longer to give it power similar to the .45-70."A Hard-Hitter in Rifle or Gandgun by Dr. George E. Dvorchak, Jr. in The case Marlin created is very similar to a rimmed .303 British trimmed and necked-up to work with .429 bullets.

Some hunters initially claimed some trouble because the .444 was frequently hand-loaded using existing .429 bullets that were designed for use at handgun velocities. Remington has stated in letter and email, when asked, that their 240-grain .444 bullet was not the same as a .44 magnum handgun bullet.

Despite the litany of false rumors about the 240-grain bullets, the rifle gained additional popularity as additional bullets were designed for its higher velocity.The .444 Marlin
by Chuck Hawks

In 1972 Marlin re-introduced the .45-70 to their lever-action line, expanding their big-bore offerings. Sales of the .444 are now overshadowed by the .45-70 cartridge, which has enjoyed a resurgence in popularity due to interest in cowboy action shooting. This quick action and powerful stopping power has been shown to be an efficient and useful hunting rifle for experienced shooters.

Performance

The .444 Marlin can push a bullet at velocities over generating of energy. SAAMI has rated this cartridge at 44,000 CUP. It functions efficiently when used with cast lead bullets. Hand-cast bullets allows the shooter to optimize the alloy for strength and expansion at the higher velocities generated by the Marlin over the traditional .44 caliber bullets. There are several commercial moulds available for the hand-caster: the SAEC #433 mould which casts a gas-checked bullet, and the Lyman 429640 at are two of the more potent bullets for this caliber. Proper cartridge length is maintained by seating the bullet to the correct depth and using a crimp die to put a firm crimp on the seated bullet to prevent slippage in the magazine tube.

Best cast bullet accuracy in the .444 Marlin is attained when utilizing bullets sized to .432" diameter, both in the older "Micro-Grooved" and the newer "Ballard" style barrels. This bullet diameter is dictated more by the large diameter of chamber throats than by groove diameter of the barrel. A projectile closely fitting the throat dimensions greatly enhances the cast bullet performance of this cartridge. Those writers and publications citing the inability of the .444 Marlin's Micro-Groove barrel to accurately shoot cast bullets driven over . are simply in error, in that those results were largely obtained using .429" and .430" diameter cast bullets. Full factory velocity handloads when assembled using hard-cast, gas-checked bullets of .432" diameter will rival accuracy of any jacketed ammunition for this cartridge..444 Marlin- America's Most Versatile Big-Bore Part I :: By Marshall Stanton on 2001-06-27

Three years after the introduction of the .444 Marlin, Hornady introduced a new heavier bullet created specifically for use in this new .44 caliber cartridge. Since then Hornady has also made a 265 grain (17.2 g) interlock "Light Magnum" that boosts velocity to nearly and of energy at the muzzle. Hornady's latest offering for this caliber is its new LEVERevolution ammunition that has a soft polymer spire point that can be safely loaded in tubular magazines. Because of an increased ballistic coefficient, Hornady claims increased velocity at distances over , and velocity and energy at the muzzle of , and at , and versus and for its interlock ammo.

Other specialized companies such as Buffalo Bore, Cor-Bon, Underwood Ammo, and Grizzly Cartridge offer loadings for the .444 Marlin in bullet weights up to .

Comparisons

The newer .450 Marlin is also frequently compared with it. While it does not have the power of the .450 Marlin, the .444 Marlin is very similar ballistically to the .45-70, the almost extinct .348 Winchester, and is virtually identical to the .405 Winchester, in its loading. A bullet in has the same sectional density as a bullet in and can provide good penetration on large game. According to M. L. McPherson (editor, ''Cartridges of the World''), "the 444 is fully capable against any species in North America"''Nosler Reloading Guide 5th Edition''; Book by Nosler Inc, LP, 2002, p. 487. and describes its useful range as being out to about . The typical .444 Marlin fired from a rifle has more impact energy at than a .44 Magnum has at the muzzle when fired from a barrel.

See also

* 10 mm caliber
* List of rifle cartridges
* Table of handgun and rifle cartridges

References

*
*
*Cartridge Dimensions: ''Designing and Forming Custom Cartridges'', Book by Ken Howell, Precision Shooting, 1995, p. 359

External links

The Marlin Models 308, 336, 444, and 1895
at Chuck Hawks

{{Remington Cartridges Firearms

Pistol and rifle cartridges