|
Thrust-specific Fuel Consumption
Thrust-specific fuel consumption (TSFC) is the fuel efficiency of an engine design with respect to thrust output. TSFC may also be thought of as fuel consumption (grams/second) per unit of thrust (newtons, or N), hence ''thrust-specific''. This figure is inversely proportional to specific impulse, which is the amount of thrust produced per unit fuel consumed. TSFC or SFC for thrust engines (e.g. turbojets, turbofans, ramjets, rockets, etc.) is the mass of fuel needed to provide the net thrust for a given period e.g. lb/(h·lbf) (pounds of fuel per hour-pound of thrust) or g/(s·kN) (grams of fuel per second-kilonewton). Mass of fuel is used, rather than volume (gallons or litres) for the fuel measure, since it is independent of temperature. Specific fuel consumption of air-breathing jet engines at their maximum efficiency is more or less proportional to exhaust speed. The fuel consumption ''per mile'' or ''per kilometre'' is a more appropriate comparison for aircraft that travel ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Fuel Efficiency
Fuel efficiency is a form of thermal efficiency, meaning the ratio of effort to result of a process that converts chemical potential energy contained in a carrier (fuel) into kinetic energy or work. Overall fuel efficiency may vary per device, which in turn may vary per application, and this spectrum of variance is often illustrated as a continuous energy profile. Non-transportation applications, such as industry, benefit from increased fuel efficiency, especially fossil fuel power plants or industries dealing with combustion, such as ammonia production during the Haber process. In the context of transport, fuel economy is the energy efficiency of a particular vehicle, given as a ratio of distance traveled per unit of fuel consumed. It is dependent on several factors including engine efficiency, transmission design, and tire design. In most countries, using the metric system, fuel economy is stated as "fuel consumption" in liters per 100 kilometers (L/100 km) or kilometer ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Lift To Drag Ratio
In aerodynamics, the lift-to-drag ratio (or L/D ratio) is the lift generated by an aerodynamic body such as an aerofoil or aircraft, divided by the aerodynamic drag caused by moving through air. It describes the aerodynamic efficiency under given flight conditions. The L/D ratio for any given body will vary according to these flight conditions. For an aerofoil wing or powered aircraft, the L/D is specified when in straight and level flight. For a glider it determines the glide ratio, of distance travelled against loss of height. The term is calculated for any particular airspeed by measuring the lift generated, then dividing by the drag at that speed. These vary with speed, so the results are typically plotted on a 2-dimensional graph. In almost all cases the graph forms a U-shape, due to the two main components of drag. The L/D may be calculated using computational fluid dynamics or computer simulation. It is measured empirically by testing in a wind tunnel or in free flight te ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
JT8D
The Pratt & Whitney JT8D is a low-bypass (0.96 to 1) turbofan engine introduced by Pratt & Whitney in February 1963 with the inaugural flight of the Boeing 727. It was a modification of the Pratt & Whitney J52 turbojet engine which powered the US Navy A-6 Intruder and A-4 Skyhawk attack aircraft. Eight models comprise the JT8D standard engine family, covering the thrust range from 12,250 to 17,400 pounds-force (62 to 77 kN), and power 727, 737-100/200, and DC-9. The updated JT8D-200 family, covering the 18,900 to 21,000 pounds-force (84 to 93 kN), powers the MD-80 and re-engined Super 27 aircraft. The Volvo RM8 was license-built in Sweden for the Saab 37 Viggen fighter. Pratt & Whitney also sells static versions for powerplant and ship propulsion as the FT8. Design The JT8D is an axial-flow front turbofan engine incorporating a two-spool design. There are two coaxially-mounted independent rotating assemblies: one rotating assembly for the low pressure compre ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Soloviev D-30
The Soloviev D-30 (now the Aviadvigatel PS-30) is a Soviet two-shaft low-bypass turbofan engine, officially referred to as a "bypass turbojet". It is probably the single most important turbofan engine developed in the Soviet Union. Development of the turbofan spurred numerous growth versions with increased fan diameter and modified component arrangements. Developed within an amazingly short period of time (about three years), the D-30 turned out to be one of the most reliable engines in the history of Soviet engine development, and it was recognized with the USSR State Prize. Design and development The original version of the Soloviev D-30 was developed specifically to power the Tupolev Tu-134 short-to-medium range jet airliner; however, it also served as a base for the development of a family of advanced engines. Engine development was started in the early 60s. Nevertheless, by 1966, the engine was put into serial production. The D-30 engine has a two-stage compression spool, a ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
CFM56
The CFM International CFM56 (U.S. military designation F108) series is a Franco-American family of high-bypass turbofan aircraft engines made by CFM International (CFMI), with a thrust range of . CFMI is a 50–50 joint-owned company of Safran Aircraft Engines (formerly known as Snecma) of France, and GE Aviation (GE) of the United States. Both companies are responsible for producing components and each has its own final assembly line. GE produces the high-pressure compressor, combustor, and high-pressure turbine, Safran manufactures the fan, gearbox, exhaust and the low-pressure turbine, and some components are made by Avio of Italy and Honeywell from the US. The engines are assembled by GE in Evendale, Ohio, and by Safran in Villaroche, France. The completed engines are marketed by CFMI. Despite initial export restrictions, it is the most used turbofan aircraft engine in the world, in four major variants. The CFM56 first ran in 1974.Bilien, J. and Matta, R. (1989). ''The CFM5 ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
IAE V2500
The IAE V2500 is a two-shaft high-bypass turbofan engine built by International Aero Engines (IAE) which powers the Airbus A320 family, the McDonnell Douglas MD-90, and the Embraer C-390 Millennium. The engine's name is a combination of the Roman numeral V, symbolizing the five original members of the International Aero Engines consortium, which was formed in 1983 to produce the V2500 engine. The 2500 represents the produced by the original engine model, the V2500-A1. FAA type certification for the V2500 was granted in 1988. The maintenance, repair, and operations market for V2500 is close to as of 2015. Development Rolls-Royce based the 10-stage HP compressor on a scale-up of the RC34B eight-stage research unit used in the RB401-06 Demonstrator Engine, but with two additional stages added to the front and rear of the compressor spool. Pratt & Whitney developed the combustor and the 2-stage air-cooled HP turbine, while the Japanese Aero Engine Corporation provided the LP co ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
PS-90
The Aviadvigatel PS-90 is a Russian high-bypass commercial turbofan rated at 16000 kgf (157 kN, 35,300 lbf) thrust. It powers Russian airliners such as the Ilyushin Il-96 and the Tupolev Tu-204/Tu-214 series and transport aircraft such as the Ilyushin Il-76. It is made by the Russian aircraft engine company Aviadvigatel, which is the successor of the Soviet Soloviev Design Bureau. "PS" are the initials of Pavel Soloviev (russian: Павел Алеќсандрович Соловьёв). Design and development With the advent of new generation of Russian airliners, Aviadvigatel developed the PS-90 to satisfy the demands of economy, performance and exhaust emissions. It represented a huge advance over previous generations of 1960s era Soviet engines. The PS-90 is almost double the efficiency of those engines and is reasonably competitive to western engines of the 1980s such as the Pratt & Whitney PW2000. Design features It incorporates many firsts in a one-of-a-kind Russian eng ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
PW2000
The Pratt & Whitney PW2000, also known by the military designation F117 and initially referred to as the JT10D, is a series of high-bypass turbofan aircraft engines with a thrust range from . Built by Pratt & Whitney, they were designed for the Boeing 757. As a 757 powerplant, these engines compete with the Rolls-Royce RB211. Design and development Pratt & Whitney began working on the JT10D in October 1971 intended for the McDonnell Douglas YC-15 into the Advanced Medium STOL Transport project and the Boeing 767, then code named 7X7, which first ran in August 1974. In December 1980, Pratt & Whitney changed to a new naming system for its engines and the JT10D became the PW2037. The PW2000 is a dual-spool, axial air flow, annular combustion, high bypass turbofan with a dual-channel Full authority digital engine control (FADEC) system. It was certified in 1984 as the first civilian FADEC-controlled aviation engine. MTU Aero Engines holds a 21.2% stake in the engine, having d ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Progress D-18T
The Progress D-18T (or Lotarev D-18T) is a high-bypass turbofan that powers the Antonov An-124 Ruslan and An-225 large freighters. Design and development The engine was developed in the second half of the 1970s by the then Soviet Ivchenko-Progress design bureau. It is manufactured by the Motor Sich factory in Zaporizhzhia, Ukraine. It was the first engine in the USSR that could deliver more than 20,000 kgf (~196 kN or ~44,000 lbf) of thrust. The first start of a full-scale engine occurred on September 19, 1980, the An-124 maiden flight on December 24, 1982 and the engine passed official bench tests on December 19, 1985. An upgraded 3M version was developed to reduce emissions and increase the life of the hot section to 14,000 h, and is introduced on An-124s of Antonov Airlines. Currently 188 D-18T engines are in operation with a total flight time of over 1 million hours. Incidents In March 2020 Ukrainian authorities ordered a one time inspection of all D-18T engin ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
GE CF6
The General Electric CF6, US military designations F103 and F138, is a family of high-bypass turbofan engines produced by GE Aviation. Based on the TF39, the first high-power high-bypass jet engine, the CF6 powers a wide variety of civilian airliners. The basic engine core also powers the LM2500 and LM6000 marine and power generation turboshafts. It is gradually being replaced by the newer GEnx family. Development After developing the TF39 for the C-5 Galaxy in the late 1960s, GE offered a more powerful variant for civilian use, the CF6, and quickly found interest in two designs being offered for a recent Eastern Airlines contract, the Lockheed L-1011 and the McDonnell Douglas DC-10. Lockheed eventually selected the Rolls-Royce RB211, but the latter stuck with the CF6 and entered service in 1971. It was also selected for versions of the Boeing 747. Since then, the CF6 has powered versions of the Airbus A300, A310 and A330, Boeing 767, and McDonnell Douglas MD-11. The high b ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
RB211
The Rolls-Royce RB211 is a British family of high-bypass turbofan engines made by Rolls-Royce. The engines are capable of generating of thrust. The RB211 engine was the first production three-spool engine, and turned Rolls-Royce from a significant player in the aero-engine industry into a global leader. Originally developed for the Lockheed L-1011 TriStar, it entered service in 1972 and was the exclusive engine to power the L-1011. Mismanagement of the initial development and consequent cost issues led to the effective nationalisation of Rolls-Royce Limited, to save the workforce and the engine businesses important to the UK and many other aerospace and aircraft operating companies. In the early 1970s, the engine was reckoned by the company to be capable of at least 50 years of continuous development. The RB211 was superseded in 1989 by the Rolls-Royce Trent family of engines when the RB211-524L was renamed the Trent. History Background In 1966, American Airlines annou ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
PW4000
The Pratt & Whitney PW4000 is a family of dual-spool, axial-flow, high-bypass turbofan aircraft engines produced by Pratt & Whitney as the successor to the JT9D. It was first run in April 1984, was FAA certified in July 1986, and was introduced in June 1987. With thrust ranging from , it is used on many wide-body aircraft. Development The 52,000-62,000 lbf (230-275 kN), -fan PW4000 made its first run in April 1984, was FAA certified in July 1986, and was introduced in June 1987. It powers the Airbus A300-600 and Airbus A310-300, Boeing 747-400 and 767-200/300, and McDonnell Douglas MD-11 widebodies. Development of the , -fan version began in December 1991 for the Airbus A330, was FAA certified in August 1993, and made its first flight two months later. It received 90min Extended-range Twin-engine Operations (ETOPS) approval at introduction in December 1994, and 180min ETOPS approval in July 1995. In January 2000, it was the A330 market leader with more than hal ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
