|
Round Turn And Two Half Hitches
{{Knot-details , name=Round turn and two half-hitches , image=Anderthalb Rundtörn mit zwei halben Schlägen.jpg , names= Round turn and a half-hitch, Two round turns and two half-hitches, etc. , type= hitch , strength= , origin= , related= Two half-hitches, Clove hitch, Buntline hitch, capstan equation , releasing= , uses= Secure the end of a rope to a fixed object. , caveat= , abok_number= #1720, #1721, #1784, #1834, #1835, #1836, #1883, #1884, #1910 The round turn and two half hitches is a hitch used to secure the end of a rope to a fixed object. The name refers to the components used to form the knot: a round turn wraps the rope around the object (completely encircling it) and the two half hitches secure the end around the standing part. Variations of this hitch can be made with differing numbers of turns and half-hitches; an example is illustrated below. With additional turns, it becomes a pipe hitch A pipe hitch is a hitch-type knot used to secure sm ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Two Half-hitches
Two half-hitches is a type of knot, specifically a binding knot or hitch knot. One variety consists of an overhand knot tied around a post, followed by a half-hitch. This knot is less often referred to as a clove hitch over itself, double half-hitch, or full-hitch. The following three-step process for tying the two half-hitches is also explained in the image gallery below. Click on the images for high-resolution versions. # Begin by forming a clockwise loop around the pole, with the working end of the rope on top. Bring the working end through the loop. At this point, you have an overhand knot around the pole. #Bring the working end down and to the left. Loop it under the standing end. Pull the working end through the loop just formed, tighten, and slide the knot along the standing end up to the post. #A correctly tied two half-hitches resembles a clove hitch tied around the standing end of the line, not a cow hitch. Image:Two half hitches 1.jpg, Step 1: Form a singl ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Clove Hitch
The clove hitch is a type of knot. Along with the bowline and the sheet bend, it is often considered one of the most important knots. A clove hitch is two successive half-hitches around an object. It is most effectively used as a crossing knot. It can be used as a binding knot, but is not particularly secure in that role. A clove hitch made around the rope's own standing part is known as either two half-hitches or buntline hitch, depending on whether the turns of the clove hitch progress away from or towards the hitched object. Usage This knot is particularly useful where the length of the running end needs to be adjustable, since feeding in rope from either direction will loosen the knot to be tightened at a new position. With certain types of cord, the clove hitch can slip when loaded. In modern climbing rope, the clove hitch will slip to a point, and then stop slipping. When tied around a carabiner, the load should pull on the end closest to its spine. With smaller ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Buntline Hitch
The buntline hitch is a knot used for attaching a rope to an object. It is formed by passing the working end around an object, then making a clove hitch around the rope's standing part and taking care that the turns of the clove hitch progress ''towards'' the object rather than away from it. Secure and easily tied, the buntline hitch will jam when subjected to extreme loads. Given the knot's propensity to jam, it is often made in slipped form. History Simple and effective, the buntline hitch dates to the age of sail, when it was used to secure buntlines to the foot of the sailsBrion Toss, ''Chapman's Nautical Guides: Knots'' (New York: Hearst Marine Books, 1990), 39.Clifford W. Ashley, ''The Ashley Book of Knots'' (New York: Doubleday, 1944), 310. on square-rigged ships. That the buntline hitch was the preferred knot speaks to its security and reliability.Geoffrey Budworth, ''The Complete Book of Knots'' (London: Octopus, 1997), 51. Once set, repeated jerking and slatting ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Capstan Equation
The capstan equation or belt friction equation, also known as Euler-Eytelwein's formula (after Leonhard Euler and Johann Albert Eytelwein), relates the hold-force to the load-force if a flexible line is wound around a cylinder (a bollard, a winch or a capstan). Because of the interaction of frictional forces and tension, the tension on a line wrapped around a capstan may be different on either side of the capstan. A small ''holding'' force exerted on one side can carry a much larger ''loading'' force on the other side; this is the principle by which a capstan-type device operates. A holding capstan is a ratchet device that can turn only in one direction; once a load is pulled into place in that direction, it can be held with a much smaller force. A powered capstan, also called a winch, rotates so that the applied tension is multiplied by the friction between rope and capstan. On a tall ship a holding capstan and a powered capstan are used in tandem so that a small force c ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
List Of Hitch Knots
A hitch knot is a type of knot used to secure a rope to an object or another rope. It is used in a variety of situations, including climbing, sailing, and securing loads. Hitch knots are classified based on their ability to be tightened or released, their resistance to slipping, and their strength. Some common types of hitch knots include the fisherman's knot, the water knot, and the clove hitch. Hitch knots are important because they allow a rope to be securely fastened to an object, enabling the rope to support weight or transmit force. Physical theory of hitches A simple mathematical theory of hitches has been proposed by Bayman and extended by Maddocks and Keller. It makes predictions that are approximately correct when tested empirically. Alphabetical list of hitch knots See also * List of knots * Single hitch References {{Knots Hitch knots, ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Rope
A rope is a group of yarns, plies, fibres, or strands that are twisted or braided together into a larger and stronger form. Ropes have tensile strength and so can be used for dragging and lifting. Rope is thicker and stronger than similarly constructed cord, string, and twine. Construction Rope may be constructed of any long, stringy, fibrous material, but generally is constructed of certain natural or synthetic fibres. Synthetic fibre ropes are significantly stronger than their natural fibre counterparts, they have a higher tensile strength, they are more resistant to rotting than ropes created from natural fibres, and they can be made to float on water. But synthetic ropes also possess certain disadvantages, including slipperiness, and some can be damaged more easily by UV light. Common natural fibres for rope are Manila hemp, hemp, linen, cotton, coir, jute, straw, and sisal. Synthetic fibres in use for rope-making include polypropylene, nylon, polyesters (e.g. ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Knot
A knot is an intentional complication in cordage which may be practical or decorative, or both. Practical knots are classified by function, including hitches, bends, loop knots, and splices: a ''hitch'' fastens a rope to another object; a ''bend'' fastens two ends of a rope to each another; a ''loop knot'' is any knot creating a loop; and ''splice'' denotes any multi-strand knot, including bends and loops. A knot may also refer, in the strictest sense, to a stopper or knob at the end of a rope to keep that end from slipping through a grommet or eye. Knots have excited interest since ancient times for their practical uses, as well as their topological intricacy, studied in the area of mathematics known as knot theory. History Knots and knotting have been used and studied throughout history. For example, Chinese knotting is a decorative handicraft art that began as a form of Chinese folk art in the Tang and Song Dynasty (960–1279 AD) in China, later popularized in t ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Round Turn
A turn is one round of rope on a pin or cleat, or one round of a coil. Turns can be made around various objects, through rings, or around the standing part of the rope itself or another rope. A turn also denotes a component of a knot. When the legs of a loop are brought together and crossed the rope has taken a turn. One distinguishes between single turn, round turn, and two round turns depending on the number of revolutions around an object. The benefit of round turns is best understood from the capstan equation. Riding turn A riding turn is a section of rope that passes on top of another section of rope, often parallel or at only a slight angle to the section below. Examples of riding turns can be seen in both the constrictor knot and the strangle knot. The second course of wrappings in some seizing knots can be referred to as riding turns. The formation of an unintentional riding turn on a sailing winch can cause it to jam. Single hitch A single hitch is a type of knot. ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Half Hitch
The half hitch is a simple overhand knot, where the working end of a line is brought over and under the standing part. Insecure on its own, it is a valuable component of a wide variety of useful and reliable hitches, bends, and knots. Two successive half hitches tied around an object makes up the common clove hitch. Two successive half hitches tied around the standing part of a rope is known as two half-hitches or double half hitch. One instance where a half hitch stands on its own without additional embellishment is when added to a timber hitch to help stabilize a load in the direction of pull. A timber hitch is tied on the far end of the load to bind it securely and a half hitch made at the forward end to serve as a guide for the rope. In this instance, the half hitch combined with a timber hitch is known as a killick hitch or kelleg hitch. The knot is attractive to the eye and so is used decoratively for French whipping which is also known as ''half hitch whipping''. S ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Pipe Hitch
A pipe hitch is a hitch-type knot used to secure smooth cylindrical objects, such as pipes, poles, beams, or spars. According to ''The Ashley Book of Knots'', a pipe hitch is "used to lower a pipe or hoist one" and as "another method of tying to a rectangular timber." Information The pipe hitch will not slip when tied correctly to a pipe or pole. This knot is a variation of the Round turn and two half-hitches.Ashley (1944), p.332. This knot can be used with a rope to pull a pipe or spar out of the ground, or to hoist a pipe or beam. Instructions The pipe hitch is started by wrapping four or more coils around a pipe or pole. It is finished by tying the working end around the standing part with a clove hitch, and less commonly with a cow hitch or a buntline hitch. See also *List of knots This list of knots includes many alternative names for common knots and lashings. Knot names have evolved over time, and there are many conflicting or confusing naming issues. The overhand ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
