|
Railmotor
Railmotor is a term used in the United Kingdom and elsewhere for a railway lightweight railcar, usually consisting of a railway carriage with a steam traction unit, or a diesel or petrol engine, integrated into it. Steam railcars Overview In the earliest days of railways, designers wished to produce a vehicle for passenger carrying that was economical to build and operate on routes where passenger numbers were light. A single coach with its own prime mover was a solution adopted in some cases; this may be thought of as the predecessor to the railcar, a term more associated with the use of internal combustion engines. William Bridges Adams started building railmotors in small numbers as early as 1848. The Bristol and Exeter Railway used a steam carriage. In most cases the early designs were unsuccessful technically, but in the early years of the twentieth century, street-running passenger tramways started to use small steam engines to draw tramcars, replacing the customary hors ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
GWR Autocoach
The GWR Autocoach (or auto-trailer) is a type of coach that was used by the Great Western Railway for push-pull trains powered by a steam locomotive. The distinguishing design feature of an autocoach is the driving cab at one end, allowing the driver to control the train without needing to be located in the cab of the steam locomotive. This eliminates the need to run the engine round to the other end of the coach at the end of each journey. When one or more autocoaches are connected to a suitably equipped steam locomotive, the combination is known as an auto-train, or, historically, a railmotor train. A steam locomotive provided with the equipment to be used as an autotrain is said to be auto-fitted. The autocoach is the forerunner of the driving trailer used with push–pull trains. Design features A locomotive fitted with additional control equipment is used to power the autotrain. When running 'autocoach first', the regulator is operated by a linkage to a rotating shaft ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Great Western Railway
The Great Western Railway (GWR) was a British railway company that linked London with the southwest, west and West Midlands of England and most of Wales. It was founded in 1833, received its enabling Act of Parliament on 31 August 1835 and ran its first trains in 1838 with the initial route completed between London and Bristol in 1841. It was engineered by Isambard Kingdom Brunel, who chose a broad gauge of —later slightly widened to —but, from 1854, a series of amalgamations saw it also operate standard-gauge trains; the last broad-gauge services were operated in 1892. The GWR was the only company to keep its identity through the Railways Act 1921, which amalgamated it with the remaining independent railways within its territory, and it was finally merged at the end of 1947 when it was nationalised and became the Western Region of British Railways. The GWR was called by some "God's Wonderful Railway" and by others the "Great Way Round" but it was famed as the "Holiday ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Railcar
A railcar (not to be confused with a railway car) is a self-propelled railway vehicle designed to transport passengers. The term "railcar" is usually used in reference to a train consisting of a single coach (carriage, car), with a driver's cab at one or both ends. Some railway companies, such as the Great Western, termed such vehicles "railmotors" (or "rail motors"). Self-propelled passenger vehicles also capable of hauling a train are, in technical rail usage, more usually called "rail motor coaches" or "motor cars" (not to be confused with the motor cars, otherwise known as automobiles, that operate on roads). The term is sometimes also used as an alternative name for the small types of multiple unit which consist of more than one coach. That is the general usage nowadays in Ireland when referring to any diesel multiple unit (DMU), or in some cases electric multiple unit (EMU). In North America the term "railcar" has a much broader sense and can be used (as an abbr ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Steam Motor
A steam motor is a form of steam engine used for light locomotives and light self-propelled motor cars used on railways. The origins of steam motor cars for railways go back to at least the 1850s, if not earlier, as experimental economizations for railways or railroads with marginal budgets. These first examples, at least in North America, appear to have been fitted with light reciprocating engines, and either direct or geared drives, or geared-endless chain drives. Most incorporated a passenger carrying coach attached (usually rigidly) to the engine and its boiler. Boiler types varied in these earlier examples, with vertical boilers dominant in the first decade (as a space saver) and then with very small diameter horizontal boilers. Other examples of steam motor cars incorporated an express-baggage or luggage type car body, with coupling apparatus provided to allow the steam motor car to draw a light passenger coach. An early example with the all-in-one (coach, baggage, mail and ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
William Bridges Adams
William Bridges Adams (1797 – 23 July 1872) was an English author, inventor and locomotive engineer. He is best known for his patented Adams axle – a successful radial axle design in use on railways in Britain until the end of steam traction in 1968 – and the railway fishplate. His writings, including ''English Pleasure Carriages'' (1837) and ''Roads and Rails'' (1862) covered all forms of land transport. Later he became a noted writer on political reform, under the pen name ''Junius Redivivus'' ( Junius reborn); a reference to a political letter writer of the previous century. Personal life He was born and grew up in Woore, Shropshire, close to Madeley, Staffordshire, and was educated at the Madeley School. His father, the son of a yeoman farmer of Woore, moved to London where he worked his way from a journeyman coachbuilder to master tradesman. His principal business was that of supplying leather to coachmakers from a shop in Dean Street, Soho. In due course Adams was ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Bristol And Exeter Railway Fairfield Steam Carriage
The Bristol and Exeter Railway ''Fairfield'' was an experimental broad gauge self-propelled steam carriage. In later use the carriage portion was removed and it was used as a small shunting locomotive. Fairfield The steam carriage was built to the design of William Bridges Adams at Fairfield Works in Bow, London. It was tested on the West London Railway late in 1848, although it was early in 1850 before modifications had been made that allowed Adams to demonstrate that it was working to the agreed standards. The design was not perpetuated by the Bristol and Exeter Railway, instead they purchased small 2-2-2T locomotives for working their branch lines. It worked on the Clevedon and Tiverton branches, although it might have spent some time on the Weston branch too. The power unit had a single pair of driving wheels driven through a jackshaft by small cylinders, the steam produced in a vertical boiler. The boiler was not covered by a cab or other bodywork; the two pairs of ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
0-4-0
Under the Whyte notation for the classification of steam locomotives, represents one of the simplest possible types, that with two axles and four coupled wheels, all of which are driven. The wheels on the earliest four-coupled locomotives were connected by a single gear wheel, but from 1825 the wheels were usually connected with coupling rods to form a single driven set. The notation 0-4-0T indicates a tank locomotive of this wheel arrangement on which its water and fuel is carried on board the engine itself, rather than in an attached tender. In Britain, the Whyte notation of wheel arrangement was also often used for the classification of electric and diesel-electric locomotives with side-rod-coupled driving wheels. Under the UIC classification used in Europe and, in more recent years, in simplified form in the United States, a 0-4-0 is classified as B (German and Italian) if the axles are connected by side rods or gearing and 020 (French), independent of axle motoring. The ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
LSWR C14 Class
The London and South Western Railway C14 class was a class of ten 2-2-0 tank locomotives intended to work push–pull trains on lightly used lines in 1907. The S14 class was an 0-4-0 version of the same basic design. Both classes proved to be underpowered in this role and many examples were sold as light shunters during the First World War. Three C14 remained with the LSWR and were rebuilt as 0-4-0Ts. They lasted until the late 1950s. History C14 class During the first few years of the twentieth century the London and South Western Railway became concerned about losses incurred on several branch and short-distance passenger services, and began to experiment with the use of steam-powered railmotors. The resulting units proved to be under-powered during the summer months when traffic was higher, and also inflexible, as the power unit was permanently connected to the coach. As an alternative Dugald Drummond designed a class of small 2-2-0 tank locomotives, based on the railmotor p ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
0-2-2
An 0-2-2, in the Whyte notation for the classification of steam locomotives by wheel arrangement, is one that has two coupled driving wheels followed by two trailing wheels, with no leading wheels. The configuration was briefly built by Robert Stephenson and Company for the Liverpool and Manchester Railway Equivalent classifications Other equivalent classifications are: *UIC classification: A1 (also known as German classification and Italian classification) *French classification: 011 *Turkish classification: 12 *Swiss classification: 1/2 Liverpool & Manchester Railway ''Rocket'' The 0-2-2 or ''Northumbrian'' wheel arrangement was first used for Stephenson's ''Rocket'', their entry for the Rainhill Trials of 1829, a competition to choose a locomotive design for the new Liverpool & Manchester Railway. Stephenson recognised that the rules of the competition favoured a fast, light locomotive of only moderate hauling power. Although George Stephenson's previous designs had b ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Train Station
A train station, railway station, railroad station or depot is a railway facility where trains stop to load or unload passengers, freight or both. It generally consists of at least one platform, one track and a station building providing such ancillary services as ticket sales, waiting rooms and baggage/freight service. If a station is on a single-track line, it often has a passing loop to facilitate traffic movements. Places at which passengers only occasionally board or leave a train, sometimes consisting of a short platform and a waiting shed but sometimes indicated by no more than a sign, are variously referred to as "stops", "flag stops", " halts", or "provisional stopping places". The stations themselves may be at ground level, underground or elevated. Connections may be available to intersecting rail lines or other transport modes such as buses, trams or other rapid transit systems. Terminology In British English, traditional terminology favours ''railway station' ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
SECR P Class
The South Eastern and Chatham Railway (SECR) P class is a class of 0-6-0T steam locomotive designed by Harry Wainwright. They were inspired by, and loosely based on, the more successful LB&SCR A1 class "Terriers" and eight were built in 1909 and 1910. They were originally intended for lightweight passenger trains, to replace underpowered steam railmotors. Certain cost-saving design compromises had been made, compared to the Terrier design, and the P class were found to be underpowered, having only 73% of the Terrier's tractive effort. The P class were later re-allocated to shunting and station pilot duties. All eight locomotives passed into Southern Railway ownership at The Grouping in 1923, and into British Railways ownership at Nationalisation in 1948. Withdrawals took place between 1955 and 1961, but four examples have been preserved. Numbering The first two locomotives, built in 1909, were numbered 753 and 754. The 1910-built locomotives re-used numbers ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Train Station
A train station, railway station, railroad station or depot is a railway facility where trains stop to load or unload passengers, freight or both. It generally consists of at least one platform, one track and a station building providing such ancillary services as ticket sales, waiting rooms and baggage/freight service. If a station is on a single-track line, it often has a passing loop to facilitate traffic movements. Places at which passengers only occasionally board or leave a train, sometimes consisting of a short platform and a waiting shed but sometimes indicated by no more than a sign, are variously referred to as "stops", "flag stops", " halts", or "provisional stopping places". The stations themselves may be at ground level, underground or elevated. Connections may be available to intersecting rail lines or other transport modes such as buses, trams or other rapid transit systems. Terminology In British English, traditional terminology favours ''railway station' ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
.jpg "Click for more on -> Railmotor")
.jpg "Click for more on -> Railcar")
.jpg "Click for more on -> Train Station")
