|
Recovery Procedure
In telecommunication, a recovery procedure is a process that attempts to bring a system back to a normal operating state. Examples: #The actions necessary to restore an automated information system's data files and computational capability after a system failure. #In data communications, a process whereby a data station attempts to resolve conflicting or erroneous conditions arising during the data transfer. See also * Error detection and correction *Fault-tolerant design *Fault-tolerant system Fault tolerance is the property that enables a system to continue operating properly in the event of the failure of one or more faults within some of its components. If its operating quality decreases at all, the decrease is proportional to the ... References * Telecommunications techniques Fault tolerance {{telecomm-stub ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Telecommunication
Telecommunication is the transmission of information by various types of technologies over wire, radio, optical, or other electromagnetic systems. It has its origin in the desire of humans for communication over a distance greater than that feasible with the human voice, but with a similar scale of expediency; thus, slow systems (such as postal mail) are excluded from the field. The transmission media in telecommunication have evolved through numerous stages of technology, from beacons and other visual signals (such as smoke signals, semaphore telegraphs, signal flags, and optical heliographs), to electrical cable and electromagnetic radiation, including light. Such transmission paths are often divided into communication channels, which afford the advantages of multiplexing multiple concurrent communication sessions. ''Telecommunication'' is often used in its plural form. Other examples of pre-modern long-distance communication included audio messages, such as coded d ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Communications System
A communications system or communication system is a collection of individual telecommunications networks, transmission systems, relay stations, tributary stations, and terminal equipment usually capable of interconnection and interoperation to form an integrated whole. The components of a communications system serve a common purpose, are technically compatible, use common procedures, respond to controls, and operate in union. Telecommunications is a method of communication (e.g., for sports broadcasting, mass media, journalism, etc.). Communication is the act of conveying intended meanings from one entity or group to another through the use of mutually understood signs and semiotic rules. Types By media An optical communication system is any form of telecommunication that uses light as the transmission medium. Equipment consists of a transmitter, which encodes a ''message'' into an optical '' signal'', a '' communication channel'', which carries the signal to its dest ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Automated Information System
An automated information system (AIS) is an assembly of computer hardware, software, firmware, or any combination of these, configured to accomplish specific information-handling operations, such as communication, computation, dissemination, processing, and storage of information. Included are computers, word processing systems, networks, or other electronic information handling systems, and associated equipment. Management information systems are a common example of automated information systems. An example of this is an industrial robot. Also an Automated Information System (AIS) refers to any piece of equipment or interconnected system of equipment utilized in the automated collection, storage, manipulation, management, movement, control, display, switching, interchange, transmission, or receiving of data, and includes computer software, firmware, and hardware. Computers, word processing systems, networks, or other electronic information handling systems, as well as accompany ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Data File
A data file is a computer file which stores data to be used by a computer application or system, including input and output data. A data file usually does not contain instructions or code to be executed (that is, a computer program). Most of the computer programs work with data files. Types of data files Data files can be stored in two ways: * Text files; * Binary files. Text files A text file (also called ASCII files) stores information in ASCII characters. A text file contains human-readable characters. A user can read the contents of a text file or edit it using a text editor. In text files, each line of text is terminated, (delimited) with a special character known as EOL (End of Line) character. In text files some internal translations take place when this EOL character is read or written. Examples of text files *A text document (often .txt) Binary files A binary file is a file that contains information in the same format in which the information is held in memory i.e ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Data Communications
Data transmission and data reception or, more broadly, data communication or digital communications is the transfer and reception of data in the form of a digital bitstream or a digitized analog signal transmitted over a point-to-point or point-to-multipoint communication channel. Examples of such channels are copper wires, optical fibers, wireless communication using radio spectrum, storage media and computer buses. The data are represented as an electromagnetic signal, such as an electrical voltage, radiowave, microwave, or infrared signal. Analog transmission is a method of conveying voice, data, image, signal or video information using a continuous signal which varies in amplitude, phase, or some other property in proportion to that of a variable. The messages are either represented by a sequence of pulses by means of a line code (''baseband transmission''), or by a limited set of continuously varying waveforms (''passband transmission''), using a digital modulation ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Data Transfer
Data transmission and data reception or, more broadly, data communication or digital communications is the transfer and reception of data in the form of a digital bitstream or a digitized analog signal transmitted over a point-to-point or point-to-multipoint communication channel. Examples of such channels are copper wires, optical fibers, wireless communication using radio spectrum, storage media and computer buses. The data are represented as an electromagnetic signal, such as an electrical voltage, radiowave, microwave, or infrared signal. Analog transmission is a method of conveying voice, data, image, signal or video information using a continuous signal which varies in amplitude, phase, or some other property in proportion to that of a variable. The messages are either represented by a sequence of pulses by means of a line code (''baseband transmission''), or by a limited set of continuously varying waveforms (''passband transmission''), using a digital modulation ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Error Detection And Correction
In information theory and coding theory with applications in computer science and telecommunication, error detection and correction (EDAC) or error control are techniques that enable reliable delivery of digital data over unreliable communication channels. Many communication channels are subject to channel noise, and thus errors may be introduced during transmission from the source to a receiver. Error detection techniques allow detecting such errors, while error correction enables reconstruction of the original data in many cases. Definitions ''Error detection'' is the detection of errors caused by noise or other impairments during transmission from the transmitter to the receiver. ''Error correction'' is the detection of errors and reconstruction of the original, error-free data. History In classical antiquity, copyists of the Hebrew Bible were paid for their work according to the number of stichs (lines of verse). As the prose books of the Bible were hardly ever ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Fault-tolerant Design
Fault tolerance is the property that enables a system to continue operating properly in the event of the failure of one or more faults within some of its components. If its operating quality decreases at all, the decrease is proportional to the severity of the failure, as compared to a naively designed system, in which even a small failure can cause total breakdown. Fault tolerance is particularly sought after in high-availability, mission-critical, or even life-critical systems. The ability of maintaining functionality when portions of a system break down is referred to as graceful degradation. A fault-tolerant design enables a system to continue its intended operation, possibly at a reduced level, rather than failing completely, when some part of the system fails. The term is most commonly used to describe computer systems designed to continue more or less fully operational with, perhaps, a reduction in throughput or an increase in response time in the event of some partial ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Fault-tolerant System
Fault tolerance is the property that enables a system to continue operating properly in the event of the failure of one or more faults within some of its components. If its operating quality decreases at all, the decrease is proportional to the severity of the failure, as compared to a naively designed system, in which even a small failure can cause total breakdown. Fault tolerance is particularly sought after in high-availability, Mission critical, mission-critical, or even life-critical systems. The ability of maintaining functionality when portions of a system break down is referred to as graceful degradation. A fault-tolerant design enables a system to continue its intended operation, possibly at a reduced level, rather than failing completely, when some part of the system failure, fails. The term is most commonly used to describe computer systems designed to continue more or less fully operational with, perhaps, a reduction in throughput or an increase in response time (tech ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Telecommunications Techniques
Telecommunication is the transmission of information by various types of technologies over wire, radio, optical, or other electromagnetic systems. It has its origin in the desire of humans for communication over a distance greater than that feasible with the human voice, but with a similar scale of expediency; thus, slow systems (such as postal mail) are excluded from the field. The transmission media in telecommunication have evolved through numerous stages of technology, from beacons and other visual signals (such as smoke signals, semaphore telegraphs, signal flags, and optical heliographs), to electrical cable and electromagnetic radiation, including light. Such transmission paths are often divided into communication channels, which afford the advantages of multiplexing multiple concurrent communication sessions. ''Telecommunication'' is often used in its plural form. Other examples of pre-modern long-distance communication included audio messages, such as coded dru ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
