|
Production String
The production string is a part of an oil well that is composed of the production tubing and other completion components and serves as the conduit through which the production fluid flows from the oil reservoir to the surface through the wellhead A wellhead is the component at the surface of an oil or gas well that provides the structural and pressure-containing interface for the drilling and production equipment. The primary purpose of a wellhead is to provide the suspension point and .... Its purpose is to both contain the fluids from contaminating the environment or eroding the other well structures, such as the casing. External links Schlumberger Oilfield Glossary: production string {{petroleum-stub Petroleum production ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Oil Well
An oil well is a drillhole boring in Earth that is designed to bring petroleum oil hydrocarbons to the surface. Usually some natural gas is released as associated petroleum gas along with the oil. A well that is designed to produce only gas may be termed a gas well. Wells are created by drilling down into an oil or gas reserve that is then mounted with an extraction device such as a pumpjack which allows extraction from the reserve. Creating the wells can be an expensive process, costing at least hundreds of thousands of dollars, and costing much more when in hard to reach areas, e.g., when creating offshore oil platforms. The process of modern drilling for wells first started in the 19th century, but was made more efficient with advances to oil drilling rigs during the 20th century. Wells are frequently sold or exchanged between different oil and gas companies as an asset – in large part because during falls in price of oil and gas, a well may be unproductive, but if price ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Production Tubing
Production tubing is a tube used in a wellbore through which production fluids are produced (travel). Background Production tubing is run into the drilled well after the casing is run and cemented in place. Production tubing protects wellbore casing from wear, tear, corrosion, and deposition of by-products, such as sand / silt, paraffins, and asphaltenes. Along with other components that constitute the production string, it provides a continuous bore from the production zone to the wellhead through which oil and gas can be produced. It is usually between five and ten centimeters in diameter and is held inside the casing through the use of expandable packing devices. Purpose and design of production tubing is to enable quick, efficient, and safe installation, removal and re-installation. If there is more than one zone of production in the well, up to four lines of production tubing can be run. Production casing Production casing is the final casing string set in a well and usua ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Production Fluid
Production fluid is the fluid mixture of oil, gas and water in formation fluid that flows to the surface of an oil well from a reservoir. Its consistency and composition varies. Fluids may be described by a multitude of characteristics including: *Water cut - the proportion of the fluid, which is water rather than hydrocarbons. *API gravity - the oilfield measurement of the weight of the hydrocarbons. *GOR - Gas to oil ratio describing how many standard cubic feet A standard cubic foot (scf) is a unit used both in the natural gas industry to represent an amount of natural gas and in other industries where other gases are used. It is the unit commonly used when following the customary system, a collection ... of gas can be obtained for every stock tank barrel of oil. * H2S - the concentration of this gas. Fluids with a high concentration of H2S are described as "sour". External links Schlumberger Oilfield Glossary: produced fluid Petroleum production Natural gas {{ ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Oil Reservoir
A petroleum reservoir or oil and gas reservoir is a subsurface accumulation of hydrocarbons contained in porous or fractured rock formations. Such reservoirs form when kerogen (ancient plant matter) is created in surrounding rock by the presence of high heat and pressure in the Earth's crust. Petroleum reservoirs are broadly classified as ''conventional'' and '' unconventional'' reservoirs. In conventional reservoirs, the naturally occurring hydrocarbons, such as crude oil or natural gas, are trapped by overlying rock formations with lower permeability, while in unconventional reservoirs, the rocks have high porosity and low permeability, which keeps the hydrocarbons trapped in place, therefore not requiring a cap rock. Reservoirs are found using hydrocarbon exploration methods. Oil field An oil field is an area of accumulation of liquid oil underground in multiple (potentially linked) reservoirs, trapped as it rises by impermeable rock formations. In industrial terms, an o ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Wellhead
A wellhead is the component at the surface of an oil or gas well that provides the structural and pressure-containing interface for the drilling and production equipment. The primary purpose of a wellhead is to provide the suspension point and pressure seals for the casing strings that run from the bottom of the hole sections to the surface pressure control equipment. While drilling the oil well, surface pressure control is provided by a blowout preventer (BOP). If the pressure is not contained during drilling operations by the column of drilling fluid, casings, wellhead, and BOP, a well blowout could occur. When the well has been drilled, it is completed to provide an interface with the reservoir rock and a tubular conduit for the well fluids. The surface pressure control is provided by a Christmas tree, which is installed on top of the wellhead, with isolation valves and choke equipment to control the flow of well fluids during production. Wellheads are typically welded on ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Casing (oil Well)
Casing is a large diameter pipe that is assembled and inserted into a recently drilled section of a borehole. Similar to the bones of a spine protecting the spinal cord, casing is set inside the drilled borehole to protect and support the wellstream. The lower portion (and sometimes the entirety) is typically held in place with cement. Deeper strings usually are not cemented all the way to the surface, so the weight of the pipe must be partially supported by a casing hanger in the wellhead. Casing that is cemented in place aids the drilling process in several ways: * Prevents contamination of fresh water well zones. * Prevents unstable upper formations from caving in and sticking the drill string or forming large caverns. * Provides a strong upper foundation to allow use of high-density drilling fluid to continue drilling deeper. * Isolates various zones, which may have different pressures or fluids, in the drilled formations from one another. * Seals off high pressure zones f ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
