Propeller Reduction Gearbox
A propeller speed reduction unit is a gearbox or a belt and pulley device used to reduce the output revolutions per minute (rpm) from the higher input rpm of the powerplant.Gunston 2006, p. 82. This allows the use of small displacement internal combustion engines to turn aircraft propellers within an efficient speed range. History and operation The Wright brothers recognised the need for propeller reduction gearing in 1903, but it was not generally used on aircraft engines until larger engines were designed in the 1920s. Large engines with high crankshaft speeds and power outputs demanded propeller reduction, pilots noted the increase in performance of similar aircraft fitted with reduction gearing. Types Types of propeller speed reduction units include: *Chain drive *Single reduction or spur gear *Internal spur gear *Farman or bevel planetary type *Fixed sun gear *Fixed internal gear *Belt drive *Epicyclic gearing Design variations The Rolls-Royce Falcon engine of 1915 feat ... [...More Info...]       [...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]   |
|
Counter-rotating Propellers
Counter-rotating propellers, also referred to as CRP, are propellers which spin in opposite directions to each other. They are used on some twin- and multi-engine propeller-driven aircraft. The propellers on most conventional twin-engined aircraft spin clockwise (as viewed from behind the engine). Counter-rotating propellers generally spin clockwise on the left engine and counter-clockwise on the right. The advantage of such designs is that counter-rotating propellers balance the effects of torque and P-factor, meaning that such aircraft do not have a critical engine in the case of engine failure. Drawbacks of counter-rotating propellers come from the fact that, in order to reverse the rotation of one propeller, either one propeller must have an additional reversing gearbox, or the engines themselves must be adapted to turn in opposite directions. (Meaning that there are essentially two engine designs, one with left-turning and the other with right-turning parts, which compl ... [...More Info...]       [...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]   |
|
Rotax
Rotax is the brand name for a range of internal combustion engines developed and manufactured by the Austrian company BRP-Rotax GmbH & Co KG (until 2016 BRP-Powertrain GmbH & Co. KG), in turn owned by the Canadian Bombardier Recreational Products. Rotax four-stroke and advanced two-stroke engines are used in a wide variety of small land, sea and airborne vehicles. Bombardier Recreational Products (BRP) use them in their own range of such vehicles. In the light aircraft class, in 1998 Rotax outsold all other aero engine manufacturers combined.Gunston, W.; "''World Encyclopaedia of Aero Engines''", 4th Edition, Patrick Stephens Ltd, 1998, Page 170. History The company was founded in 1920 in Dresden, Germany, as ROTAX-WERK AG. In 1930, it was taken over by Fichtel & Sachs and transferred its operations to Schweinfurt, Germany. Operations were moved to Wels, Austria, in 1943 and finally to Gunskirchen, Austria, in 1947. In 1959, the majority of Rotax shares were taken over by the ... [...More Info...]       [...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]   |
|
Light Sport Aircraft
A light-sport aircraft (LSA), or light sport aircraft, is a fairly new category of small, lightweight aircraft that are simple to fly. LSAs tend to be heavier and more sophisticated than ultralight (aka "microlight") aircraft, but LSA restrictions on weight and performance separates the category from established GA aircraft. There is no standard worldwide description of an LSA . LSAs in different countries The civil aviation authorities in different countries have their own particular specifications and regulations which define the LSA category. For example, in Australia the Civil Aviation Safety Authority defines a light-sport aircraft as a heavier-than-air or lighter-than-air craft, other than a helicopter, with a maximum gross takeoff weight of not more than for lighter-than-air craft; for heavier-than-air craft not intended for operation on water; or for aircraft intended for operation on water. It must have a maximum stall speed of in landing configuration; a maximum ... [...More Info...]       [...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]   |
|
Lycoming O-480
The Lycoming O-480 is a family of six-cylinder (engine), cylinder, flat engine, horizontally opposed fixed-wing aircraft engines of 479.6 cubic inch (7.86 L) displacement, made by Lycoming Engines. The engine is a six-cylinder version of the four-cylinder Lycoming O-320. Design and development O-480 series engines are installed on a number of different aircraft types. Their main competitive engines are the Continental IO-520 and Continental IO-550, IO-550 series. Variants All engines have an additional prefix preceding the ''480'' to indicate the specific configuration of the engine. Although the series is known as the "O-480", there are only geared engines in the series.FAA GO-480 Series Type Certificate. Retrieved on 10 January 2009. [...More Info...]       [...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]   |
|
Lycoming O-435
The Lycoming O-435 is an American six-cylinder, horizontally opposed fixed-wing aircraft and helicopter engine made by Lycoming Engines. The engine is a six-cylinder version of the four-cylinder Lycoming O-290. Design and development The powerplant is a horizontally opposed Lycoming six-cylinder design. It is a direct-drive or geared, air-cooled, and normally aspirated engine. The cylinders have steel barrels with aluminum heads, and the valves are operated by hydraulic lifters. The crankshaft is supported in an aluminum-alloy split case by four main bearings and one ball-thrust bearing, and lubricating oil is supplied from a 12 quart wet sump. The camshaft rides in journals that do not employ bearing inserts. The accessory housing supports two magnetos, a starter, a generator, and a dual tach drive. A spare mounting pad is included for a vacuum pump. Variants All engines have an additional prefix preceding the ''435'' to indicate the specific configuration of the engine. Ther ... [...More Info...]       [...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]   |
|
Beechcraft
Beechcraft is an American brand of civil aviation and military aircraft owned by Textron Aviation since 2014, headquartered in Wichita, Kansas. Originally, it was a brand of Beech Aircraft Corporation, an American manufacturer of general aviation, commercial, and military aircraft, ranging from light single-engined aircraft to twin-engined turboprop transports, business jets, and military trainers. Phillips, Edward H., aviation historian, BOOK:"Beechcraft: Pursuit of Perfection: A History of Beechcraft Airplanes,"1992, Flying Books, , 9780911139112, retrieved May 16, 2017Green, William, Gordon Swainborough, and John Mowinski, BOOK"Modern Commercial Aircraft,"1987, Portland House, New York, Beech later became a division of Raytheon and then Hawker Beechcraft before a bankruptcy sale turned its assets over to Textron (parent company of Beech's historical cross-town Wichita rival, Cessna Aircraft Company). It remains a brand of Textron Aviation.Ostrower, Jon and John Kell"Textron ... [...More Info...]       [...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]   |
|
Helio Courier
The Helio Courier is a cantilever high-wing light STOL utility aircraft designed in 1949. Around 500 of these aircraft were manufactured in Pittsburg, Kansas, from 1954 until 1974 by the Helio Aircraft Company. The design featured four leading edge slats that deployed automatically, and large trailing edge flaps. The engine was the 295 hp Lycoming GO-480, which had a gearbox that lowered the output RPM and allowed for the use of a large three-bladed propeller to further improve takeoff performance. Couriers were famous for their takeoffs, which often took only a few plane lengths and then climbed at very high angles. During airshow demonstrations, it was common for the aircraft to actually take off across a 100 - 200 foot wide runway. The geared engine, however, required constant maintenance and was a major downside to the design. During the early 1980s, new owners (Helio Aircraft Ltd.) made an attempt to build new aircraft with direct-drive Lycoming engines, to replace ... [...More Info...]       [...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]   |
|
Continental GO-300
The Continental O-300 and the C145 are a family of air-cooled flat-6 aircraft piston engines built by Teledyne Continental Motors.Christy, Joe: ''Engines for Homebuilt Aircraft & Ultralights'', pages 60-63. TAB Books, 1983. First produced in 1947, versions were still in production . It was produced under licence in the United Kingdom by Rolls-Royce in the 1960s. Development The C-145 was developed from the C-125 engine. Both powerplants share the same crankcase, although the C-145 produces an additional through a longer piston stroke, higher compression ratio of 7.0:1 and different carburetor jetting. The O-300 is a modernized C-145 and retains the same weight, dimensions, bore, stroke, compression ratio, displacement and output power of the earlier engine. GO-300 The GO-300 employs a reduction gearbox, so that the engine turns at 3200 rpm to produce a propeller rpm of 2400. The GO-300 produces whereas the ungeared O-300 produces . The GO-300 engine has a TBO (Time ... [...More Info...]       [...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]   |
|
Cessna 175
The Cessna 175 Skylark is a four-seat, single-engine, high-wing airplane produced by Cessna between 1958 and 1962. Production history The 175 was designed to fill a niche between the Cessna 172 and the faster Cessna 182. The engine of the 175, a geared version of the O-300 (Continental O-300#GO-300, Continental GO-300) used in the 172, is rated at 175 hp (130 kW), or 30 hp (22 kW) more than the 172 engine. Between 1958 and 1962, a total of 2,106 were built. The basic airplane was marketed as the 175, and the plane with a package of optional equipment and overall paint (a partial paint scheme was used on the basic model) was marketed as the Skylark. Design The airframe of the 175 is all metal, constructed of aluminum alloy. The fuselage is a monocoque#Aircraft, semi-monocoque structure, with exterior skin sheets riveted to formers and longerons. The strut-braced wings, likewise, are constructed of exterior skin sheets riveted to spar (aviation), spars and r ... [...More Info...]       [...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]   |
|
Homebuilt Aircraft
Homebuilt aircraft, also known as amateur-built aircraft or kit planes, are constructed by persons for whom this is not a professional activity. These aircraft may be constructed from "scratch", from plans, or from assembly kits.Armstrong, Kenneth: ''Choosing Your Homebuilt - the one you will finish and fly! Second Edition'', pp. 39–52. Butterfield Press, 1993. Peter M Bowers: ''Guide to Homebuilts - Ninth Edition''. TAB Books, Blue Ridge Summit PA, 1984. Overview In the United States, Brazil, Australia, New Zealand and South Africa, homebuilt aircraft may be licensed Experimental under FAA or similar local regulations. With some limitations, the builder(s) of the aircraft must have done it for their own education and recreation rather than for profit. In the U.S., the primary builder can also apply for a repairman's certificate for that airframe. The repairman's certificate allows the holder to perform and sign off on most of the maintenance, repairs, and inspections themsel ... [...More Info...]       [...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]   |
|
Camshaft
A camshaft is a shaft that contains a row of pointed cams, in order to convert rotational motion to reciprocating motion. Camshafts are used in piston engines (to operate the intake and exhaust valves), mechanically controlled ignition systems and early electric motor speed controllers. Camshafts in piston engines are usually made from steel or cast iron, and the shape of the cams greatly affects the engine's characteristics. History Trip hammers are one of the early uses of a form of cam to convert rotating motion, e.g. from a waterwheel, into the reciprocating motion of a hammer used in forging or to pound grain. Evidence for these exists back to the Han Dynasty in China, and they were widespread by the medieval period. The camshaft was described in 1206 by engineer Al-Jazari. He employed it as part of his automata, water-raising machines, and water clocks such as the castle clock. Once the rotative version of the steam engine was developed in the late 18th century, the ... [...More Info...]       [...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]   |