|
X.21
X.21 (sometimes referred to as X21) is an interface specification for differential communications introduced in the mid-1970s by the ITU-T. X.21 was first introduced as a means to provide a digital signaling interface for telecommunications between carriers and customers' equipment. This includes specifications for DTE/ DCE physical interface elements, alignment of call control characters and error checking, elements of the call control phase for circuit switching services, and test loops. When X.21 is used with V.11, it provides synchronous data transmission at rates from 600 bit/s to 10 Mbit/s. There is also a variant of X.21 that is only used in select legacy applications, “circuit switched X.21”. X.21 normally is found on a 15-pin D-sub connector and is capable of running full-duplex data transmissions. The Signal Element Timing, or clock, is provided by the carrier (the telephone company), and is responsible for correct clocking of the data. X.21 was primarily used i ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Data Circuit-terminating Equipment
A data circuit-terminating equipment (DCE) is a device that sits between the data terminal equipment (DTE) and a data transmission circuit. It is also called data communication(s) equipment and data carrier equipment. Usually, the DTE device is the terminal (or computer), and the DCE is a modem. In a ''data station'', the DCE performs functions such as signal conversion, coding, and line clocking and may be a part of the DTE or intermediate equipment. Interfacing equipment may be required to couple the DTE into a transmission circuit or channel and from a transmission circuit or channel into the DTE. Usage Although the terms are most commonly used with RS-232, several data communication standards define different types of interfaces between a DCE and a DTE. The DCE is a device that communicates with a DTE device in these standards. Standards that use this nomenclature include: * Federal Standard 1037C, MIL-STD-188 * RS-232 * Certain ITU-T standards in the V series (notably V.24 ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Circuit Switched
Circuit switching is a method of implementing a telecommunications network in which two network nodes establish a dedicated communications channel ( circuit) through the network before the nodes may communicate. The circuit guarantees the full bandwidth of the channel and remains connected for the duration of the communication session. The circuit functions as if the nodes were physically connected as with an electrical circuit. Circuit switching originated in analog telephone networks where the network created a dedicated circuit between two telephones for the duration of a telephone call. It contrasts with message switching and packet switching used in modern digital networks in which the trunklines between switching centers carry data between many different nodes in the form of data packets without dedicated circuits. Description The defining example of a circuit-switched network is the early analog telephone network. When a call is made from one telephone to another, swit ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Differential Signaling
Differential signalling is a method for electrically transmitting information using two complementary signals. The technique sends the same electrical signal as a differential pair of signals, each in its own conductor. The pair of conductors can be wires in a twisted-pair or ribbon cable or traces on a printed circuit board. Electrically, the two conductors carry voltage signals which are equal in magnitude, but of opposite polarity. The receiving circuit responds to the difference between the two signals, which results in a signal with a magnitude twice as large. The symmetrical signals of differential signalling may be referred to as ''balanced'', but this term is more appropriately applied to balanced circuits and balanced lines which reject common-mode interference when fed into a differential receiver. Differential signalling does not make a line balanced, nor does noise rejection in balanced circuits require differential signalling. Differential signalling is to ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
ITU-T
The ITU Telecommunication Standardization Sector (ITU-T) is one of the three sectors (divisions or units) of the International Telecommunication Union (ITU). It is responsible for coordinating standards for telecommunications and Information Communication Technology such as X.509 for cybersecurity, Y.3172 and Y.3173 for machine learning, and H.264/MPEG-4 AVC for video compression, between its Member States, Private Sector Members, and Academia Members. The first meeting of the World Telecommunication Standardization Assembly (WTSA), the sector's governing conference, took place on 1 March of that year. ITU-T has a permanent secretariat called the Telecommunication Standardization Bureau (TSB), which is based at the ITU headquarters in Geneva, Switzerland. The current director of the TSB is Chaesub Lee (of South Korea), whose first 4-year term commenced on 1 January 2015, and whose second 4-year term commenced on 1 January 2019. Chaesub Lee succeeded Malcolm Johnson (Director), Malc ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Data Terminal Equipment
Data terminal equipment (DTE) is an end instrument that converts user information into signals or reconverts received signals. These can also be called tail circuits. A DTE device communicates with the data circuit-terminating equipment (DCE). The DTE/DCE classification was introduced by IBM. A DTE is the functional unit of a data station that serves as a data source or a data sink and provides for the data communication control function to be performed in accordance with the link protocol. Usually, the DTE device is the terminal (or a computer emulating a terminal), and the DCE is a modem or another carrier-owned device. The data terminal equipment may be a single piece of equipment or an interconnected subsystem of multiple pieces of equipment that perform all the required functions necessary to permit users to communicate. A user interacts with the DTE (e.g. through a human-machine interface), or the DTE may be the user. Connections Two different types of devices are as ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Call Control
In telephony, call control refers to the software within a telephone switch that supplies its central function. Call control decodes addressing information and routes telephone calls from one end point to another. It also creates the features that can be used to adapt standard switch operation to the needs of users. These are called supplementary services and are commonly invoked by a Vertical service code. Examples include "Call waiting", " Call forward on busy" etc. Call control software, because of its central place in the operation of the telephone network, is marked by both complexity and reliability. Call control systems will typically require many thousands of person years in development. They will contain millions of lines of high level code. However they must and do meet reliability requirements that specify switch down time of only a few minutes in forty years. The required functionality and reliability of call control is a major challenge for Voice over IP (VoIP) systems. ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Error Control
In information theory and coding theory with applications in computer science and telecommunication, error detection and correction (EDAC) or error control are techniques that enable reliable delivery of digital data over unreliable communication channels. Many communication channels are subject to channel noise, and thus errors may be introduced during transmission from the source to a receiver. Error detection techniques allow detecting such errors, while error correction enables reconstruction of the original data in many cases. Definitions ''Error detection'' is the detection of errors caused by noise or other impairments during transmission from the transmitter to the receiver. ''Error correction'' is the detection of errors and reconstruction of the original, error-free data. History In classical antiquity, copyists of the Hebrew Bible were paid for their work according to the number of stichs (lines of verse). As the prose books of the Bible were hardly ever writ ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
ITU-T V-Series Recommendations
The ITU-T V-Series Recommendations on Data communication over the telephone network specify the protocols that govern approved modem communication standards and interfaces. ''Note:'' the '' bis'' and ''ter'' suffixes are ITU-T standard designators of successive iterations of a standard (''bis'' and ''ter'' are derived from the Latin for "twice" and "thrice"). General standards ''Applies to V.1–V.9'' *V.1 is an ITU-T recommendation, entitled ''Equivalence between binary notation symbols and the significant conditions of a two-condition code.'' *V.2 is an ITU-T recommendation, approved in November 1988, titled ''Power levels for data transmission over telephone lines.'' *V.4 is an ITU-T recommendation, approved in November 1988, titled ''General structure of signals of International Alphabet No. 5 code for character oriented data transmission over public telephone networks.'' *V.5 was an ITU-T recommendation, approved in November 1988, titled ''Standardization of data signall ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Germany
Germany,, officially the Federal Republic of Germany, is a country in Central Europe. It is the second most populous country in Europe after Russia, and the most populous member state of the European Union. Germany is situated between the Baltic and North seas to the north, and the Alps to the south; it covers an area of , with a population of almost 84 million within its 16 constituent states. Germany borders Denmark to the north, Poland and the Czech Republic to the east, Austria and Switzerland to the south, and France, Luxembourg, Belgium, and the Netherlands to the west. The nation's capital and most populous city is Berlin and its financial centre is Frankfurt; the largest urban area is the Ruhr. Various Germanic tribes have inhabited the northern parts of modern Germany since classical antiquity. A region named Germania was documented before AD 100. In 962, the Kingdom of Germany formed the bulk of the Holy Roman Empire. During the 16th ce ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Foldoc License
The Free On-line Dictionary of Computing (FOLDOC) is an online, searchable, encyclopedic dictionary of computing subjects. History FOLDOC was founded in 1985 by Denis Howe and was hosted by Imperial College London. In May 2015, the site was updated to state that it was "no longer supported by Imperial College Department of Computing". Howe has served as the editor-in-chief since the dictionary's inception, with visitors to the website able to make suggestions for additions or corrections to articles. Open sourcing The dictionary incorporates the text of other free resources, such as the Jargon File, as well as covering many other computing-related topics. Due to its availability under the GNU Free Documentation License, a copyleft license, it has in turn been incorporated in whole or part into other free content projects, such as Wikipedia. Recognition * This site's brief 2001 review by a Ziff Davis Ziff Davis, Inc. is an American digital media and internet company. Fir ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
