|
Wink Pulsing
Winking is a telephony signaling technique used both in connection with DC signaling on a trunk, and with indicator lamps on a key telephone. In telephone switching systems, wink pulsing is recurring pulsing in which the off-condition is relatively short compared to the on-condition. In wink start trunks, the exchange at the originating end sends an off-hook to alert to a call. The terminating end indicates readiness to receive the dialed telephone number by sending an off-hook of approximately half a second duration, or "wink". Upon receiving this go ahead signal, the originating end uses multi-frequency or other address signalling to send the phone number. On 1A2 key systems or similar key-operated telephone instruments, the hold position, ''i.e.,'' the hold condition, of a line is often indicated by winking the associated lamp at 120 impulses per minute. During 6% of the pulse period In medicine, a pulse represents the tactile arterial palpation of the cardiac cycle (he ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Telephony Signaling
In telecommunication, signaling is the use of signals for controlling communications. This may constitute an information exchange concerning the establishment and control of a telecommunication circuit and the management of the network. Classification Signaling systems may be classified based on several principal characteristics. In-band and out-of-band signaling In the public switched telephone network (PSTN), in-band signaling is the exchange of call control information within the same physical channel, or within the same frequency band, that the telephone call itself is using. An example is dual-tone multi-frequency signaling (DTMF), which is used on most telephone lines to customer premises. Out-of-band signaling is telecommunication signaling on a dedicated channel separate from that used for the telephone call. Out-of-band signaling has been used since Signaling System No. 6 (SS6) was introduced in the 1970s, and also in Signalling System No. 7 (SS7) in 1980 which bec ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Key Telephone
Key or The Key may refer to: Common meanings * Key (cryptography), a piece of information that controls the operation of a cryptography algorithm * Key (lock), device used to control access to places or facilities restricted by a lock * Key (map), a guide to a map's symbology * Key (music), a group of pitches in a piece * Key, on a typewriter or computer keyboard * Answer key, a list of answers to a test Geography * Cay, also spelled key, a small, low-elevation, sandy island formed on the surface of a coral reef United States * Key, Alabama * Key, Ohio * Key, West Virginia * Keys, Oklahoma * Florida Keys, an archipelago of about 1,700 islands in the southeast United States Elsewhere * Rural Municipality of Keys No. 303, Saskatchewan, Canada * Key, Iran, a village in Isfahan Province, Iran * Key Island, Tasmania, Australia * The Key, New Zealand, a locality in Southland, New Zealand Arts and media Films * ''The Key'' (1934 film), a 1934 film directed by Michael Curtiz * ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Telephone Switching
telephone exchange, telephone switch, or central office is a telecommunications system used in the public switched telephone network (PSTN) or in large enterprises. It interconnects telephone subscriber lines or virtual circuits of digital systems to establish telephone calls between subscribers. In historical perspective, telecommunication terms have been used with different semantics over time. The term ''telephone exchange'' is often used synonymously with ''central office'', a Bell System term. Often, a ''central office'' is defined as a building used to house the inside plant equipment of potentially several telephone exchanges, each serving a certain geographical area. Such an area has also been referred to as the exchange or exchange area. In North America, a central office location may also be identified as a ''wire center'', designating a facility to which a telephone is connected and obtains dial tone. For business and billing purposes, telecommunication carriers defin ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Pulse (signal Processing)
A pulse in signal processing is a rapid, transient change in the amplitude of a signal from a baseline value to a higher or lower value, followed by a rapid return to the baseline value. Pulse shapes Pulse shapes can arise out of a process called pulse-shaping. Optimum pulse shape depends on the application. Rectangular pulse These can be found in pulse waves, square waves, boxcar functions, and rectangular functions. In digital signals the up and down transitions between high and low levels are called the rising edge and the falling edge. In digital systems the detection of these sides or action taken in response is termed edge-triggered, rising or falling depending on which side of rectangular pulse. A digital timing diagram is an example of a well-ordered collection of rectangular pulses. Nyquist pulse A Nyquist pulse is one which meets the Nyquist ISI criterion and is important in data transmission. An example of a pulse which meets this condition is the sinc function. ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Off-hook
In telephony, on-hook and off-hook are two states of a communication circuit. On subscriber telephones the states are produced by placing the handset onto or off the hookswitch. Placing the circuit into the off-hook state is also called ''seizing the line''. ''Off-hook'' originally referred to the condition that prevailed when telephones had a separate earpiece (''receiver''), which hung from its switchhook until the user initiated a telephone call by removing it. When off hook the weight of the receiver no longer depresses the spring-loaded switchhook, thereby connecting the instrument to the telephone line. Off-hook The term off-hook has the following meanings: * The condition that exists when a telephone or other user instrument is in use, i.e., during dialing or communicating. * A general description of one of two possible signaling states at an interface between telecommunications systems, such as tone or no tone and ground connection versus battery connection. Note that if ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Telephone Number
A telephone number is a sequence of digits assigned to a landline telephone subscriber station connected to a telephone line or to a wireless electronic telephony device, such as a radio telephone or a mobile telephone, or to other devices for data transmission via the public switched telephone network (PSTN) or other public and private networks. A telephone number serves as an address for switching telephone calls using a system of destination code routing. Telephone numbers are entered or dialed by a calling party on the originating telephone set, which transmits the sequence of digits in the process of signaling to a telephone exchange. The exchange completes the call either to another locally connected subscriber or via the PSTN to the called party. Telephone numbers are assigned within the framework of a national or regional telephone numbering plan to subscribers by telephone service operators, which may be commercial entities, state-controlled administrations, or oth ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Multi-frequency
In telephony, multi-frequency signaling (MF) is a type of signaling that was introduced by the Bell System after World War II. It uses a combination of audible tones for address (telephone number) transport and supervision signaling on trunk lines between central offices. The signaling is sent ''in-band'' over the same channel as the bearer channel used for voice traffic. Multi-frequency signaling defines electronic signals that consist of a combination of two audible frequencies, usually selected from a set of six frequencies. Over several decades, various types of MF signaling were developed, including national and international varieties. The CCITT standardization process specified the American Bell System version as ''Regional Standard No. 1'', or Signalling System R1, and a corresponding European standard as Signalling System R2. Both were largely replaced by digital systems, such as Signalling System 7, which operate out-of-band on a separate data network. Because of the in-ba ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
1A2 Key System
The 1A2 Key Telephone System is a business telephone system developed and distributed by the Western Electric Company for the Bell System. The 1A2 Key Telephone System is a modular system that provided flexible solutions for a variety of telephone service requirements. It provides multiple users with control over multiple telephone lines without the requirement for an operator, system attendant, or receptionist. Each user can select a specific telephone line to place calls on, or to answer calls, and manage those calls by placing them on hold or transferring them to other stations. The system provides options for station-to-station signaling and intercom, and music-on-hold. The control functions are operated directly on each telephone instrument with a set of push buttons (''keys'') that have lamps installed internally to provide visual indication of line status. Introduced in 1964, the 1A2 system represents a stage of key telephone systems development at Bell Laboratories that ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Telephone Line
A telephone line or telephone circuit (or just line or circuit industrywide) is a single-user circuit on a telephone communication system. It is designed to reproduce speech of a quality that is understandable. It is the physical wire or other signaling medium connecting the user's telephone apparatus to the telecommunications network, and usually also implies a single telephone number for billing purposes reserved for that user. Telephone lines are used to deliver landline telephone service and Digital subscriber line (DSL) phone cable service to the premises. Telephone overhead lines are connected to the public switched telephone network. The voltage at a subscriber's network interface is typically 48 V between the ring and tip wires, with tip near ground and ring at -48 V. In the United States In 1878, the Bell Telephone Company began to use two-wire circuits, called the local loop, from each user's telephone to end offices which performed any necessary electrical s ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Pulse Period
In medicine, a pulse represents the tactile arterial palpation of the cardiac cycle (heartbeat) by trained fingertips. The pulse may be palpated in any place that allows an artery to be compressed near the surface of the body, such as at the neck ( carotid artery), wrist (radial artery), at the groin (femoral artery), behind the knee (popliteal artery), near the ankle joint (posterior tibial artery), and on foot (dorsalis pedis artery). Pulse (or the count of arterial pulse per minute) is equivalent to measuring the heart rate. The heart rate can also be measured by listening to the heart beat by auscultation, traditionally using a stethoscope and counting it for a minute. The radial pulse is commonly measured using three fingers. This has a reason: the finger closest to the heart is used to occlude the pulse pressure, the middle finger is used get a crude estimate of the blood pressure, and the finger most distal to the heart (usually the ring finger) is used to nullify the ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
.jpg "Click for more on -> Telephone Switching")
