|
Verbandsbauart
The German term ''Verbandsbauart'' describes both a type of goods wagon as well as a type of tram. In order to standardise the goods wagons classes of the various German state railways (''Länderbahnen''), the German State Railway Wagon Association (''Deutscher Staatsbahnwagenverband'' or ''DWV'') issued regulations. The so-called ''Verbandsbauart'' (association) or ''DWV'' wagons, named after this association, were built from 1910 until the emergence of the Austauschbauart (interchangeable) wagons in 1927. Externally, the ''Verbandsbauart'' wagons looked very much like state railway goods wagons, but they were equipped for considerably higher maximum loads of up to 20 tons. A total of 11 classes were defined by norms defined by master engineering drawings (''Musterblättern'').Literally "design sheets"; hence the specific wagon designs are referred to here as "Sheet X" The wagons were built in numbers that today are hardly conceivable. The most important ones were the A2 and A10 ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Austauschbauart
The so-called ''Austauschbauart'' wagons were German railway vehicles produced from the late 1920s onwards which had common components built to agreed standards. Origin of the concept The German term ''Austauschbau'' ('interchangeable component manufacture') is a manufacturing concept. The idea was initially used in the field of mechanical engineering, but is now the basis for industrial mass production techniques. Fundamentals The basis of ''Austauschbau'' manufacture is that: ''Any quantity of part 'A' produced at different times and in different places, must match any quantity of a similarly produced part 'B' without further finishing being required.'' In short, it is a system of common, mandatory, standard production tolerances and fits that are specified for components, based on their function. To comply with the standards, special machines and tools are used that also meet precise tolerances. In addition, measurement tools and training are needed, to ensure compliance with ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Goods Wagon
Goods wagons or freight wagons (North America: freight cars), also known as goods carriages, goods trucks, freight carriages or freight trucks, are unpowered railway vehicles that are used for the transportation of cargo. A variety of wagon types are in use to handle different types of goods, but all goods wagons in a regional network typically have standardized couplers and other fittings, such as hoses for air brakes, allowing different wagon types to be assembled into trains. For tracking and identification purposes, goods wagons are generally assigned a unique identifier, typically a UIC wagon number, or in North America, a company reporting mark plus a company specific serial number. Development At the beginning of the railway era, the vast majority of goods wagons were four- wheeled (two wheelset) vehicles of simple construction. These were almost exclusively small covered wagons, open wagons with side-boards, and flat wagons with or without stakes. Over the course of ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Open Wagon
Open wagons (trucks in the UK) form a large group of railway goods wagons designed primarily for the transportation of bulk goods that are not moisture-retentive and can usually be tipped, dumped or shovelled. The International Union of Railways (UIC) distinguishes between ordinary wagons (Class E/ UIC-type 5) and special wagons (F/6). Open wagons often form a significant part of a railway company's goods wagon fleet; for example, forming just under 40% of the Deutsche Bahn's total goods wagon stock in Germany. UIC standard goods wagons Since the 1960s, the majority of goods wagons procured by European railway administrations have been built to standards laid down by, or based on, those established by the UIC. In addition to open wagons the table also shows wagons with opening roofs (Class T), whose design is based on open wagons. File:El-Wagen-UIC-Bauart1-Zittau.jpg, Twin-axled UIC Type 1 open wagon, used as an ash wagon, on a transporter wagon in Zittau File:Es-Wa ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
German State Railway Wagon Association
The German State Railway Wagon Association (german: Deutscher Staatsbahnwagenverband) or DWV was an association of the German state railways ''Länderbahnen'' founded in 1909. The purpose of the association was to guarantee the unrestricted exchange of goods wagons between the member railway administrations. The German State Railway Wagon Association could, unlike the ''Prussian State Railway Wagon Association'', stipulate standard wagon designs for the whole of Germany. It developed a total of eleven different wagon types, the ''Verbandsbauart'' (literally: association type) or ''DWV'' wagons. In addition to entire goods wagons, types of bogie were also specified. End With the founding of the Deutsche Reichsbahn on 1 April 1920 the DWV closed its operations. Preußische und Hessische Eisenbahndirektion in Mainz (publ.): ''Amtsblatt der Preußischen und Hessischen Eisenbahndirektion in Mainz'' dated 26 June 1920, No. 39. Bekanntmachung No. 577, p. 329. References See also * ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
German State Railway Norms
In German railway engineering, norms (''Normalien'') are standards for the design and production of railway vehicles. In the 1880s and 1890s, Prussian norms were developed for the locomotives, tenders and wagons of the Prussian state railways under the direction of the railway director responsible for railway engineering, Moritz Stambke. Later, these were largely adopted by the other state railways (''Länderbahnen'') in Germany. Engineering drawings These norms are defined by engineering drawings to 1:40 scale on individual sheets and show the locomotives and wagons as full design drawings, referred to by their sheet (''Musterblatt'') numbers. The first drawings date from 1878. In 1885 the Minister for Public Works tasked the Hütte Academic Institute with the publication of the norms. The drawings were regularly updated as technical developments occurred. The last Prussian drawings were issued in 1923. Goods wagons The design drawings for goods wagons were of special importanc ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Flat Wagon
Flat wagons (sometimes flat beds, flats or rail flats, US: flatcars), as classified by the International Union of Railways (UIC), are railway goods wagons that have a flat, usually full-length, deck (or 2 decks on car transporters) and little or no superstructure. By contrast, open wagons have high side and end walls and covered goods wagons have a fixed roof and sides. Flat wagons are often designed for the transportation of goods that are not weather-sensitive. Some flat wagons are able to be covered completely by tarpaulins or hoods and are therefore suitable for the transport of weather-sensitive goods. Unlike a "goods wagon with opening roof", the loading area of a flat is entirely open and accessible once the cover is removed. Flats form a large proportion of goods wagons; for example in 1998 they comprised 40% of the total goods fleet owned by the German carrier, DB, the overwhelming majority of which were flat wagons with bogies. Typical goods transported by these ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Bogie
A bogie ( ) (in some senses called a truck in North American English) is a chassis or framework that carries a wheelset, attached to a vehicle—a modular subassembly of wheels and axles. Bogies take various forms in various modes of transport. A bogie may remain normally attached (as on many railroad cars and semi-trailers) or be quickly detachable (as the dolly in a road train or in railway bogie exchange); it may contain a suspension within it (as most rail and trucking bogies do), or be solid and in turn be suspended (as most bogies of tracked vehicles are); it may be mounted on a swivel, as traditionally on a railway carriage or locomotive, additionally jointed and sprung (as in the landing gear of an airliner), or held in place by other means (centreless bogies). In Scotland, the term is used for a child’s (usually home-made) wooden cart. While ''bogie'' is the preferred spelling and first-listed variant in various dictionaries, bogey and bogy are also used. Rai ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Kunze-Knorr Compressed Air Brake
The Kunze-Knorr brake (''Kunze-Knorr-Bremse'' or ''KK-Bremse'') is an automatic compressed-air brake for goods, passenger and express trains. It was the first graduated brake for goods trains in Europe. When it was introduced after the First World War, goods train brakes switched from hand operation to compressed-air in various European countries. The Deutsche Reichsbahn alone put the cost of equipping German goods wagons with Kunze-Knorr brakes between 1918 and 1927 at 478.4 million Reichsmarks. The operating cost savings from faster goods services and having fewer brakemen was assessed by the Reichsbahn at almost 96.3 million Reichsmark annually. Inventors The Kunze-Knorr brake brought together the ideas of Prussian senior surveyor, Bruno Kunze (1854–1935), and preparatory work by the founder of Knorr-Bremse, Georg Knorr (1859–1911). It was the first, continuous, compressed-air brake that, even on long goods trains, enabled the brake force not only to be applied gradually, ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Stanchion
A stanchion () is a sturdy upright fixture that provides support for some other object. It can be a permanent fixture. Types In architecture stanchions are the upright iron bars in windows that pass through the eyes of the saddle bars or horizontal irons to steady the leadlight. The French call the latter ''traverses'', the stanchions ''montants'', and the whole arrangement ''armature''. Stanchions frequently finish with ornamental heads forged out of the iron. Stanchions are also the metal supporting members of lighting mounted from a lower elevation. This includes the metal inclined member for mounting a streetlight to a telephone or power pole, and the dedicated metal vertical support of a self-supporting or bottom-fed streetlight. In this case, the stanchion pole may double as the Electrical conduit, raceway for the electrical feed to the lighting. In industrial installations, walkway lighting may be mounted with a stanchion that is secured to a hand-rail. Stanchion lights ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Bundesarchiv RH8II Bild-B1945-44, Peenemünde, Kraftfahrzeugtransport Mit Eisenbahn
, type = Archive , seal = , seal_size = , seal_caption = , seal_alt = , logo = Bundesarchiv-Logo.svg , logo_size = , logo_caption = , logo_alt = , image = Bundesarchiv Koblenz.jpg , image_caption = The Federal Archives in Koblenz , image_alt = , formed = , preceding1 = , preceding2 = , dissolved = , superseding1 = , superseding2 = , agency_type = , jurisdiction = , status = Active , headquarters = PotsdamerStraße156075Koblenz , coordinates = , motto = , employees = , budget = million () , chief1_name = Michael Hollmann , chief1_position = President of the Federal Archives , chief2_name = Dr. Andrea Hänger , chief2_position ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
