|
United States Navy Mark 11 Mod 0 Sniper Weapon System
The SR-25 (Stoner Rifle-25) is a designated marksman rifle and semi-automatic sniper rifle designed by Eugene Stoner and manufactured by Knight's Armament Company. The SR-25 uses a rotating bolt and a direct impingement gas system. It is loosely based on Stoner's AR-10, rebuilt in its original 7.62×51mm NATO caliber. Up to 60% of parts of the SR-25 are interchangeable with the AR-15 and M16—everything but the upper and lower receivers, the hammer, the barrel assembly and the bolt carrier group. SR-25 barrels were originally manufactured by Remington Arms with its 5R (five grooves, right twist) rifling, with twist 1:11.25. The heavy barrel is free-floating, so handguards are attached to the front of the receiver and do not touch the barrel. History In the late 1950s, Eugene Stoner designed the AR-10 battle rifle to equip U.S. troops. It was accurate for an auto-loading rifle, but it lost the competition to the M14 rifle. The patent rights for the AR-10 and the AR-15 ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Rotating Bolt
Rotating bolt is a method of locking the breech (or rear barrel) of a firearm closed for firing. Johann Nicolaus von Dreyse developed the first rotating bolt firearm, the "Dreyse needle gun", in 1836. The Dreyse locked using the bolt handle rather than lugs on the bolt head like the Mauser M 98 or M16. The first rotating bolt rifle with two lugs on the bolt head was the Lebel Model 1886 rifle. The concept has been implemented on most firearms chambered for high powered cartridges since the 20th century. Design Ferdinand Ritter von Mannlicher, who had earlier developed a non-rotating bolt straight-pull rifle, developed the Steyr-Mannlicher M1895, a straight-pull rifle with a rotating bolt, which was issued to the Austro-Hungarian Army. Mannlicher then developed the M1893 auto rifle which had a screw delayed bolt and later the Mannlicher M1900 operated by a gas piston. This was an inspiration for later gas operated, semi-automatic and selective fire firearms (such as the M1 ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Free-floating Barrel
A free-floating barrel is a firearm design used in precision rifles, particularly match grade benchrest rifles, to accurize the weapon system. With conventional rifles, the gun barrel rests in contact with the fore-end of the gunstock, sometimes along the whole length. If the stock is manufactured from wood, environmental conditions or operational use may warp the wood, which may also cause the barrel to shift its alignment slightly over time, altering the projectile's external ballistics and thus the point of impact. Contact between the barrel and the stock also interferes with the natural frequency of the barrel, which can have a detrimental effect on accuracy especially when the barrel gets hot with repeated firing. The interference of the stock with the barrel's oscillation harmonics as the bullet passes down the bore can cause the barrel to vibrate inconsistently from shot to shot, depending on the external forces acting upon the stock at the time of the shot. Micro-v ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Rifling
In firearms, rifling is machining helical grooves into the internal (bore) surface of a gun's barrel for the purpose of exerting torque and thus imparting a spin to a projectile around its longitudinal axis during shooting to stabilize the projectile longitudinally by conservation of angular momentum, improving its aerodynamic stability and accuracy over smoothbore designs. Rifling is characterized by its twist rate, which indicates the distance the rifling takes to complete one full revolution, such as "1 turn in 10 inches" (1:10 inches), "1 turn in 254 mm" ("1:254 mm" or "1:25.4 cm)", or the like. Normally, an experienced shooter can infer the units of measurement from the numbers alone. A shorter distance indicates a faster twist, meaning that for a given velocity the projectile will rotate at a higher spin rate. The combination of length, weight, and shape of a projectile determines the twist rate needed to gyroscopically stabilize it – barrel ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Remington Arms
Remington Arms Company, LLC was an American manufacturer of firearms and ammunition, now broken into two companies, each bearing the Remington name. The firearms manufacturer is ''Remington Arms''. The ammunition business is called ''Remington''. The company which was broken up was called Remington Outdoor Company. Sturm, Ruger & Co. purchased the Marlin Firearms division of the Remington Outdoor Company in 2020. Founded in 1816 by Eliphalet Remington (as E. Remington and Sons) in Ilion, New York, it was one of the oldest gun makers in the US and claimed to be the oldest factory in the US that still made its original product. The company was the largest rifle manufacturer in North America according to 2015 ATF statistics. The company developed or adopted more cartridges than any other gun maker or ammunition manufacturer in the world. History 19th century origins The Remington company was founded in 1816. Eliphalet Remington II (1793–1861) believed he could build ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Bolt (firearm)
A bolt is the part of a repeating, breechloading firearm that blocks the rear opening (breech) of the barrel chamber while the propellant burns, and moves back and forward to facilitate loading/unloading of cartridges from the magazine. The firing pin and extractor are often integral parts of the bolt. The terms "breechblock" and "bolt" are often used interchangeably or without a clear distinction, though usually, a bolt is a type of breechblock that has a nominally circular cross-section. In most automatic firearms that use delayed blowback, recoil or gas operation, the bolt itself is housed within the larger bolt carrier group (BCG), which contains additional parts that receives rearward push from a gas tube (direct impingement) or a piston system. The slide of a self-loading pistol can be considered a bolt carrier, as it contains the same components and serves the same functions. Description In manually operated firearms such as bolt-action, lever-action, and pump- ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Gun Barrel
A gun barrel is a crucial part of gun-type weapons such as small firearms, artillery pieces, and air guns. It is the straight shooting tube, usually made of rigid high-strength metal, through which a contained rapid expansion of high-pressure gas(es) is used to propel a projectile out of the front end ( muzzle) at a high velocity. The hollow interior of the barrel is called the bore, and the diameter of the bore is called its caliber, usually measured in inches or millimetres. The first firearms were made at a time when metallurgy was not advanced enough to cast tubes capable of withstanding the explosive forces of early cannons, so the pipe (often built from staves of metal) needed to be braced periodically along its length for structural reinforcement, producing an appearance somewhat reminiscent of storage barrels being stacked together, hence the English name.''A History of Warfare'' - Keegan, John, Vintage 1993. History Gun barrels are usually metal. However, the e ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Hammer (firearm)
The hammer is a part of a firearm that is used to strike the percussion cap/primer, or a separate firing pin, to ignite the propellant and fire the projectile. It is so called due to the fact that it resembles a hammer in both form and function. The hammer itself is a metal piece that forcefully rotates about a pivot point. Evolution Firearms, initially known as "hand cannons", first became a viable weapon in 1364 through the advancement of chemical technologies to create a gunpowder efficient enough to launch a projectile at high speeds in a hand-held weapon. The issue quickly arose of how to effectively ignite the gunpowder while maintaining the weapon’s aim at the target. Initially, the problem was solved by using a "slow match": a chemically treated piece of rope that would stay lit for an extended period of time. The smoldering end of the rope would then be manually brought into contact with the gunpowder through a touch hole in the barrel of the weapon. when the user ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Receiver (firearms)
In firearms terminology, the firearm frame or receiver is the part of a firearm which integrates other components by providing housing for internal action components such as the hammer, bolt or breechblock, firing pin and extractor, and has threaded interfaces for externally attaching ("receiving") components such as the barrel, stock, trigger mechanism and iron/optical sights. The receiver is often made of forged, machined, or stamped steel or aluminium; in addition to these traditional materials, modern science and engineering have introduced polymers and sintered metal powders to receiver construction. Mounting A barrel can be fixed to the receiver using barrel and receiver action threads or similar methods. In US law For the purposes of United States law, the receiver or frame is legally the firearm, and as such it is the controlled part. The definition of which assembly is the legal receiver varies from firearm to firearm, under US law. Generally, the law requ ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
M16 Rifle
The M16 rifle (officially designated Rifle, Caliber 5.56 mm, M16) is a family of military rifles adapted from the ArmaLite AR-15 rifle for the United States military. The original M16 rifle was a 5.56×45mm automatic rifle with a 20-round magazine. In 1964, the M16 entered US military service and the following year was deployed for jungle warfare operations during the Vietnam War. In 1969, the M16A1 replaced the M14 rifle to become the US military's standard service rifle.Urdang, p. 801. The M16A1 incorporated numerous modifications including a bolt-assist, chrome-plated bore, protective reinforcement around the magazine release, and revised flash hider. In 1983, the US Marine Corps adopted the M16A2 rifle and the US Army adopted it in 1986. The M16A2 fires the improved 5.56×45mm (M855/SS109) cartridge and has a newer adjustable rear sight, case deflector, heavy barrel, improved handguard, pistol grip and buttstock, as well as a semi-auto and three-round burst fire sele ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
AR-15
An AR-15-style rifle is any lightweight semi-automatic rifle based on the Colt AR-15 design. The original ArmaLite AR-15 is a scaled-down derivative of Eugene Stoner's ArmaLite AR-10 design. The then Fairchild Engine and Airplane Corporation division ArmaLite sold the patent and trademarks to Colt's Manufacturing Company in 1959. After most of Colt's patents for the Colt AR-15 expired in 1977, many firearm manufacturers began to produce copies of the Colt AR-15 under various names. While the patents are expired, Colt retained the trademark of the AR-15 and is the sole manufacturer able to label their firearms as ''AR-15''. The "AR" in Colt AR-15 stands for "ArmaLite Rifle", not " assault rifle". The Federal Assault Weapons Ban restricted the sale of the Colt AR-15 and some derivatives in the United States from 1994 to 2004, although it did not affect rifles with fewer listed features. After the term modern sporting rifles was coined in 2009 by the US National Shooting Sports F ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
AR-10
The ArmaLite AR-10 is a 7.62×51mm NATO battle rifle designed by Eugene Stoner in the late 1950s and manufactured by ArmaLite (then a division of the Fairchild Aircraft Corporation). When first introduced in 1956, the AR-10 used an innovative combination of a straight-line barrel/stock design with phenolic composite, a new patent filed gas-operated bolt and carrier system and forged alloy parts resulting in a small arm significantly easier to control in automatic fire and over lighter than other infantry rifles of the day. Over its production life, the original AR-10 was built in relatively small numbers, with fewer than 10,000 rifles assembled. However, the ArmaLite AR-10 would become the progenitor for a wide range of firearms. In 1957, the basic AR-10 design was rescaled and substantially modified by ArmaLite to accommodate the .223 Remington cartridge, and given the designation ArmaLite AR-15. In 1959, ArmaLite sold its rights to the AR-10 and AR-15 to Colt's Manufacturing ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
.jpg "Click for more on -> Remington Arms")
