|
Tilting Pan Filter
A tilting pan filter is a chemical equipment used in continuous solid-liquid filtration. It is formed by a number of trapezoidal pans arranged in circle. At the center of the equipment there is the main valve which is connected to every pan through pipes. The pans are rotating continuously around the main valve, which provides the air or the vacuum necessary for the operation. In each pan it is carried out the filtration in a cyclic process that involves these stages: * feed is poured in the pan; the material to be filtered formed in this way a "cake"; * cake is washed out; * cake is dried through the aspiration of the liquid; * cake is washed out again; * cake is dried again; * pan is tilted in order to discharge the solid; * pan is sprayed with water to be cleaned; * pan is tilted back to the initial angle and the process continues with the feeding stage. References Related pages * Filtration * Filter cake A filter cake is formed by the substances that are retained on a ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Chemical Equipment
A chemical substance is a form of matter having constant chemical composition and characteristic properties. Some references add that chemical substance cannot be separated into its constituent elements by physical separation methods, i.e., without breaking chemical bonds. Chemical substances can be simple substances (substances consisting of a single chemical element), chemical compounds, or alloys. Chemical substances are often called 'pure' to set them apart from mixtures. A common example of a chemical substance is pure water; it has the same properties and the same ratio of hydrogen to oxygen whether it is isolated from a river or made in a laboratory. Other chemical substances commonly encountered in pure form are diamond (carbon), gold, table salt ( sodium chloride) and refined sugar ( sucrose). However, in practice, no substance is entirely pure, and chemical purity is specified according to the intended use of the chemical. Chemical substances exist as solids, liqu ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Solid
Solid is one of the State of matter#Four fundamental states, four fundamental states of matter (the others being liquid, gas, and Plasma (physics), plasma). The molecules in a solid are closely packed together and contain the least amount of kinetic energy. A solid is characterized by structural rigidity and resistance to a force applied to the surface. Unlike a liquid, a solid object does not flow to take on the shape of its container, nor does it expand to fill the entire available volume like a gas. The atoms in a solid are bound to each other, either in a regular geometric lattice (crystal, crystalline solids, which include metals and ordinary ice), or irregularly (an amorphous solid such as common window glass). Solids cannot be compressed with little pressure whereas gases can be compressed with little pressure because the molecules in a gas are loosely packed. The branch of physics that deals with solids is called solid-state physics, and is the main branch of condens ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Liquid
A liquid is a nearly incompressible fluid that conforms to the shape of its container but retains a (nearly) constant volume independent of pressure. As such, it is one of the four fundamental states of matter (the others being solid, gas, and plasma), and is the only state with a definite volume but no fixed shape. A liquid is made up of tiny vibrating particles of matter, such as atoms, held together by intermolecular bonds. Like a gas, a liquid is able to flow and take the shape of a container. Most liquids resist compression, although others can be compressed. Unlike a gas, a liquid does not disperse to fill every space of a container, and maintains a fairly constant density. A distinctive property of the liquid state is surface tension, leading to wetting phenomena. Water is by far the most common liquid on Earth. The density of a liquid is usually close to that of a solid, and much higher than that of a gas. Therefore, liquid and solid are both termed condensed matte ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Filtration
Filtration is a physical separation process that separates solid matter and fluid from a mixture using a ''filter medium'' that has a complex structure through which only the fluid can pass. Solid particles that cannot pass through the filter medium are described as ''oversize'' and the fluid that passes through is called the ''filtrate''. Oversize particles may form a filter cake on top of the filter and may also block the filter lattice, preventing the fluid phase from crossing the filter, known as ''blinding''. The size of the largest particles that can successfully pass through a filter is called the effective ''pore size'' of that filter. The separation of solid and fluid is imperfect; solids will be contaminated with some fluid and filtrate will contain fine particles (depending on the pore size, filter thickness and biological activity). Filtration occurs both in nature and in engineered systems; there are biological, geological, and industrial forms. Filtration is als ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Tilting Pan Filter
A tilting pan filter is a chemical equipment used in continuous solid-liquid filtration. It is formed by a number of trapezoidal pans arranged in circle. At the center of the equipment there is the main valve which is connected to every pan through pipes. The pans are rotating continuously around the main valve, which provides the air or the vacuum necessary for the operation. In each pan it is carried out the filtration in a cyclic process that involves these stages: * feed is poured in the pan; the material to be filtered formed in this way a "cake"; * cake is washed out; * cake is dried through the aspiration of the liquid; * cake is washed out again; * cake is dried again; * pan is tilted in order to discharge the solid; * pan is sprayed with water to be cleaned; * pan is tilted back to the initial angle and the process continues with the feeding stage. References Related pages * Filtration * Filter cake A filter cake is formed by the substances that are retained on a ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Valve
A valve is a device or natural object that regulates, directs or controls the flow of a fluid (gases, liquids, fluidized solids, or slurries) by opening, closing, or partially obstructing various passageways. Valves are technically fittings, but are usually discussed as a separate category. In an open valve, fluid flows in a direction from higher pressure to lower pressure. The word is derived from the Latin ''valva'', the moving part of a door, in turn from ''volvere'', to turn, roll. The simplest, and very ancient, valve is simply a freely hinged flap which swings down to obstruct fluid (gas or liquid) flow in one direction, but is pushed up by the flow itself when the flow is moving in the opposite direction. This is called a check valve, as it prevents or "checks" the flow in one direction. Modern control valves may regulate pressure or flow downstream and operate on sophisticated automation systems. Valves have many uses, including controlling water for irrigation, ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Pipe (fluid Conveyance)
A pipe is a tubular section or hollow cylinder, usually but not necessarily of circular cross-section, used mainly to convey substances which can flow — liquids and gases (fluids), slurries, powders and masses of small solids. It can also be used for structural applications; hollow pipe is far stiffer per unit weight than solid members. In common usage the words ''pipe'' and ''tube'' are usually interchangeable, but in industry and engineering, the terms are uniquely defined. Depending on the applicable standard to which it is manufactured, pipe is generally specified by a nominal diameter with a constant outside diameter (OD) and a schedule that defines the thickness. Tube is most often specified by the OD and wall thickness, but may be specified by any two of OD, inside diameter (ID), and wall thickness. Pipe is generally manufactured to one of several international and national industrial standards. While similar standards exist for specific industry applicati ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Vacuum
A vacuum is a space devoid of matter. The word is derived from the Latin adjective ''vacuus'' for "vacant" or "void". An approximation to such vacuum is a region with a gaseous pressure much less than atmospheric pressure. Physicists often discuss ideal test results that would occur in a ''perfect'' vacuum, which they sometimes simply call "vacuum" or free space, and use the term partial vacuum to refer to an actual imperfect vacuum as one might have in a laboratory or in space. In engineering and applied physics on the other hand, vacuum refers to any space in which the pressure is considerably lower than atmospheric pressure. The Latin term ''in vacuo'' is used to describe an object that is surrounded by a vacuum. The ''quality'' of a partial vacuum refers to how closely it approaches a perfect vacuum. Other things equal, lower gas pressure means higher-quality vacuum. For example, a typical vacuum cleaner produces enough suction to reduce air pressure by around 20%. But hig ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Filter Cake
A filter cake is formed by the substances that are retained on a filter. Filter aids, such as diatomaceous earth or activated carbon are usually used to form the filter cake. The purpose is to increase flow rate or achieve a smaller micron filtration. The filter cake grows in the course of filtration, becoming "thicker" as particulate matter and filter aid is retained on the filter. With increasing layer thickness, the flow resistance of the filter cake increases. After a time, the filter cake has to be removed from the filter, e.g. by backflushing. If this is not accomplished, the filtration is disrupted because the viscosity of the filter cake gets too high; hence, too little of the mixture to be filtered can pass through the filter cake and the filter plugs. The specifications of the filter cake dictate the filtration method of choice. See also * Filter press * Tilting pan filter A tilting pan filter is a chemical equipment used in continuous solid- liquid filtration. I ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Filtration
Filtration is a physical separation process that separates solid matter and fluid from a mixture using a ''filter medium'' that has a complex structure through which only the fluid can pass. Solid particles that cannot pass through the filter medium are described as ''oversize'' and the fluid that passes through is called the ''filtrate''. Oversize particles may form a filter cake on top of the filter and may also block the filter lattice, preventing the fluid phase from crossing the filter, known as ''blinding''. The size of the largest particles that can successfully pass through a filter is called the effective ''pore size'' of that filter. The separation of solid and fluid is imperfect; solids will be contaminated with some fluid and filtrate will contain fine particles (depending on the pore size, filter thickness and biological activity). Filtration occurs both in nature and in engineered systems; there are biological, geological, and industrial forms. Filtration is als ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Filter Cake
A filter cake is formed by the substances that are retained on a filter. Filter aids, such as diatomaceous earth or activated carbon are usually used to form the filter cake. The purpose is to increase flow rate or achieve a smaller micron filtration. The filter cake grows in the course of filtration, becoming "thicker" as particulate matter and filter aid is retained on the filter. With increasing layer thickness, the flow resistance of the filter cake increases. After a time, the filter cake has to be removed from the filter, e.g. by backflushing. If this is not accomplished, the filtration is disrupted because the viscosity of the filter cake gets too high; hence, too little of the mixture to be filtered can pass through the filter cake and the filter plugs. The specifications of the filter cake dictate the filtration method of choice. See also * Filter press * Tilting pan filter A tilting pan filter is a chemical equipment used in continuous solid- liquid filtration. I ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
