Teletraffic
   HOME
*





Teletraffic
Teletraffic engineering, telecommunications traffic engineering, or just traffic engineering when in context, is the application of transportation traffic engineering theory to telecommunications. Teletraffic engineers use their knowledge of statistics including queuing theory, the nature of traffic, their practical models, their measurements and simulations to make predictions and to plan telecommunication networks such as a telephone network or the Internet. These tools and knowledge help provide reliable service at lower cost. The field was created by the work of A. K. Erlang for circuit-switched networks but is applicable to packet-switched networks, as they both exhibit Markovian properties, and can hence be modeled by e.g. a Poisson arrival process. The crucial observation in traffic engineering is that in large systems the law of large numbers can be used to make the aggregate properties of a system over a long period of time much more predictable than the behaviour of ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


Routing In The PSTN
Routing in the PSTN is the process of forwarding telephone calls between the constituent telephone networks that comprise the public switched telephone network (PSTN). Telephone calls are routed across a network of potentially many switching systems, often owned by different telephone carriers. Switching systems are connected with trunks. Each switch may have many neighbors. Neighboring switches owned by different operators are connected at interconnect points. The PSTN is a network that uses destination routing to direct calls from origin to the recipient. It is not a full mesh network with the nodes of every operator directly connected to those of every other, which would be impractical and inefficient. Therefore, calls may be routed through intermediate operator networks before they reach their final destination. Efficient least-cost routing is an important procedure in PSTN routing. Call routing Each time a call is placed for routing, the destination number (a ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


Long-tail Traffic
A long-tailed or heavy-tailed probability distribution is one that assigns relatively high probabilities to regions far from the mean or median. A more formal mathematical definition is given below. In the context of teletraffic engineering a number of quantities of interest have been shown to have a long-tailed distribution. For example, if we consider the sizes of files transferred from a web-server, then, to a good degree of accuracy, the distribution is heavy-tailed, that is, there are a large number of small files transferred but, crucially, the number of very large files transferred remains a major component of the volume downloaded. Many processes are technically long-range dependent but not self-similar. The differences between these two phenomena are subtle. Heavy-tailed refers to a probability distribution, and long-range dependent refers to a property of a time series and so these should be used with care and a distinction should be made. The terms are distinct although s ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


Grade Of Service
In telecommunication engineering, and in particular teletraffic engineering, the quality of voice service is specified by two measures: the grade of service (GoS) and the quality of service (QoS). Grade of service is the probability of a call in a circuit ''group'' being blocked or delayed for more than a specified interval, expressed as a vulgar fraction or decimal fraction. This is always with reference to the busy hour when the traffic intensity is the greatest. Grade of service may be viewed independently from the perspective of incoming versus outgoing calls, and is not necessarily equal in each direction or between different source-destination pairs. "Grade of Service" sometimes means a measure of inbound call center traffic to verify adherence to conditions to measure the success of customers served. On the other hand, the quality of service which a ''single'' circuit is designed or conditioned to provide, e.g. voice grade or program grade is called the quality of service. ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  




Quality Of Service
Quality of service (QoS) is the description or measurement of the overall performance of a service, such as a telephony or computer network, or a cloud computing service, particularly the performance seen by the users of the network. To quantitatively measure quality of service, several related aspects of the network service are often considered, such as packet loss, bit rate, throughput, transmission delay, availability, jitter, etc. In the field of computer networking and other packet-switched telecommunication networks, quality of service refers to traffic prioritization and resource reservation control mechanisms rather than the achieved service quality. Quality of service is the ability to provide different priorities to different applications, users, or data flows, or to guarantee a certain level of performance to a data flow. Quality of service is particularly important for the transport of traffic with special requirements. In particular, developers have introduced Voice ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


picture info

Queuing Theory
Queueing theory is the mathematical study of waiting lines, or queues. A queueing model is constructed so that queue lengths and waiting time can be predicted. Queueing theory is generally considered a branch of operations research because the results are often used when making business decisions about the resources needed to provide a service. Queueing theory has its origins in research by Agner Krarup Erlang when he created models to describe the system of Copenhagen Telephone Exchange company, a Danish company. The ideas have since seen applications including telecommunication, traffic engineering, computing and, particularly in industrial engineering, in the design of factories, shops, offices and hospitals, as well as in project management. Spelling The spelling "queueing" over "queuing" is typically encountered in the academic research field. In fact, one of the flagship journals of the field is ''Queueing Systems''. Single queueing nodes A queue, or queueing node ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


Network Traffic Simulation
Network traffic simulation is a process used in telecommunications engineering to measure the efficiency of a communications network. Overview Telecommunications systems are complex real-world systems, containing many different components which interact, in complex interrelationships.Flood, J.E. ''Telecommunications Switching, Traffic and Networks'', Chapter 4: Telecommunications Traffic, New York: Prentice-Hall, 1998. The analysis of such systems can become extremely difficult: modelling techniques tend to analyse each component rather than the relationships between components.Penttinen A., ''Chapter 9 – Simulation'', Lecture Notes: S-38.145 - Introduction to Teletraffic Theory, Helsinki University of Technology, Fall 1999. Simulation is an approach which can be used to model large, complex stochastic systems for forecasting or performance measurement purposes.Kennedy I. G., ''Traffic Simulation'', School of Electrical and Information Engineering, University of the Witwatersrand, ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


Network Design
Network planning and design is an iterative process, encompassing topological design, network-synthesis, and network-realization, and is aimed at ensuring that a new telecommunications network or service meets the needs of the subscriber and operator.Penttinen A., ''Chapter 10 – Network Planning and Dimensioning, Lecture Notes: S-38.145 - Introduction to Teletraffic Theory'', Helsinki University of Technology, Fall 1999. The process can be tailored according to each new network or service.Farr R.E., ''Telecommunications Traffic, Tariffs and Costs – An Introduction For Managers'', Peter Peregrinus Ltd, 1988. A network planning methodology A traditional network planning methodology in the context of business decisions involves five layers of planning, namely: * need assessment and resource assessment * short-term network planning * IT resource * long-term and medium-term network planning * operations and maintenance. Each of these layers incorporates plans for different t ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


Broadband Networks
The ideal telecommunication network has the following characteristics: broadband, ''multi-media'', ''multi-point'', ''multi-rate'' and economical implementation for a diversity of services (multi-services). The Broadband Integrated Services Digital Network (B-ISDN) was planned to provide these characteristics. Asynchronous Transfer Mode (ATM) was promoted as a target technology for meeting these requirements. Communication services Personal computing facilitated easy access, manipulation, storage, and exchange of information, and required reliable data transmission. Communicating documents by images and the use of high-resolution graphics terminals provided a more natural and informative mode of human interaction than do voice and data alone. Video teleconferencing enhances group interaction at a distance. High-definition entertainment video improves the quality of pictures, but requires much higher transmission rates. These new data transmission requirements may require new tra ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  




Limited Availability
When customers of a public switched telephone network make telephone calls, they utilize a telecommunications network called a switched-circuit network. In a switched-circuit network, devices known as switches are used to connect the calling party to the called party. Each switch has a number of inlets and outlets, and by connecting a specific inlet to the correct outlet, each switch helps to complete an end-to-end circuit between users. This method is used in, for example graded multiple banks of selectors.Inherent Load Balancing
Bell System Technical Journal, Jan 1970, pp 135-165 In a modern network,

picture info

Telecommunications
Telecommunication is the transmission of information by various types of technologies over wire, radio, optical, or other electromagnetic systems. It has its origin in the desire of humans for communication over a distance greater than that feasible with the human voice, but with a similar scale of expediency; thus, slow systems (such as postal mail) are excluded from the field. The transmission media in telecommunication have evolved through numerous stages of technology, from beacons and other visual signals (such as smoke signals, semaphore telegraphs, signal flags, and optical heliographs), to electrical cable and electromagnetic radiation, including light. Such transmission paths are often divided into communication channels, which afford the advantages of multiplexing multiple concurrent communication sessions. ''Telecommunication'' is often used in its plural form. Other examples of pre-modern long-distance communication included audio messages, such as coded drumb ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


Traffic Measurement (telecommunications)
Measurement of traffic within a network allows network managers and analysts to both make day-to-day decisions about operations and to plan for long-term developments.Penttinen A., ''Chapter 4 – Traffic Modelling and Measurements'', Lecture Notes: S-38.145 - Introduction to Teletraffic Theory, Helsinki University of Technology, Fall 1999.Kennedy I., ''Why Traffic Measurement? School of Electrical and Information Engineering, University of the Witwatersrand, 2003 Traffic Measurements are used in many fundamental activities such as: *Identification of traffic patterns and trends *Calculating the traffic intensity in a specific circuit or group *Monitoring the service *Dimensioning and managing the network *Calculating tariffs *Performing forecasting *Dimensioning and managing the SS7 network *Checking the performance of the common channel signalling network The following sections will answer some fundamental questions about Traffic Measurement, such as: What should be measured; w ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


Tariffing
A telecommunications tariff is an open contract between a telecommunications service provider and the public, filed with a regulating body such as state and municipal Public Utilities Commissions and federal entities such as the Federal Communications Commission (FCC). Such tariffs outline the terms and conditions of providing telecommunications service to the public including rates, fees, and charges. Reasons for tariffs At a minimum, tariffs imposed must cover the cost of providing the service to the consumer. The consumer may be the final user or an intermediary such as a service provider. If a telecommunications operator cannot recover its costs, it will make a loss and the company will go bankrupt. Tariffs must also be used to cover maintenance, additional research and other indirect costs associated with providing the service. However, telecommunications service providers must be careful not to over-price each service, as prices have a direct influence on demand for that s ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]