|
Spread Spectrum
In telecommunication and radio communication, spread-spectrum techniques are methods by which a signal (e.g., an electrical, electromagnetic, or acoustic signal) generated with a particular bandwidth is deliberately spread in the frequency domain, resulting in a signal with a wider bandwidth. These techniques are used for a variety of reasons, including the establishment of secure communications, increasing resistance to natural interference, noise, and jamming, to prevent detection, to limit power flux density (e.g., in satellite downlinks), and to enable multiple-access communications. Telecommunications Spread spectrum generally makes use of a sequential noise-like signal structure to spread the normally narrowband information signal over a relatively wideband (radio) band of frequencies. The receiver correlates the received signals to retrieve the original information signal. Originally there were two motivations: either to resist enemy efforts to jam the communication ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Telecommunication
Telecommunication is the transmission of information by various types of technologies over wire, radio, optical, or other electromagnetic systems. It has its origin in the desire of humans for communication over a distance greater than that feasible with the human voice, but with a similar scale of expediency; thus, slow systems (such as postal mail) are excluded from the field. The transmission media in telecommunication have evolved through numerous stages of technology, from beacons and other visual signals (such as smoke signals, semaphore telegraphs, signal flags, and optical heliographs), to electrical cable and electromagnetic radiation, including light. Such transmission paths are often divided into communication channels, which afford the advantages of multiplexing multiple concurrent communication sessions. ''Telecommunication'' is often used in its plural form. Other examples of pre-modern long-distance communication included audio messages, such as code ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Time-hopping Spread Spectrum
Time-hopping (TH) is a communications signal technique which can be used to achieve anti-jamming (AJ) or low probability of intercept (LPI). It can also refer to pulse-position modulation, which in its simplest form employs 2k discrete pulses (referring to the unique positions of the pulse within the transmission window) to transmit k bit(s) per pulse. Details To achieve LPI, the transmission time is changed randomly by varying the period and duty cycle of the pulse (carrier) using a pseudo-random sequence. The transmitted signal will then have intermittent start and stop times. Although often used to form hybrid spread-spectrum (SS) systems, TH is strictly speaking a non-SS technique. Spreading of the spectrum is caused by other factors associated with TH, such as using pulses with low duty cycle having a wide frequency response. An example of hybrid SS is TH-FHSS or hybrid TDMA (time division multiple access). See also *Spread spectrum *Frequency-hopping spread spectrum *Dire ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Telefunken
Telefunken was a German radio and television apparatus company, founded in Berlin in 1903, as a joint venture of Siemens & Halske and the ''Allgemeine Elektrizitäts-Gesellschaft'' (AEG) ('General electricity company'). The name "Telefunken" appears in: * the product brand name "Telefunken"; * ''Gesellschaft für drahtlose Telegraphie m.b.H., System Telefunken'', founded 1903 in Berlin as a subsidiary of AEG and Siemens & Halske; * ''Telefunken, Gesellschaft für drahtlose Telegraphie m.b.H.'' (from 1923 to 1955 – since 1941 subsidiary of the AEG only); * ''Telefunken GmbH'' in 1955; * ''Telefunken Aktiengesellschaft (AG)'' in 1963; * Merger of AEG and Telefunken to form ''Allgemeine Elektrizitäts-Gesellschaft AEG-Telefunken'' (from 1967 to 1979); * AEG-TELEFUNKEN AG (from 1979 to 1985); * ''TELEFUNKEN Fernseh und Rundfunk GmbH'', Hanover (1972, subsidiary of AEG-TELEFUNKEN); * Telefunken electronic GmbH (a spin-off of AEG-Telefunken and DASA * the company (since 1992) ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Frequency-hopping
Frequency-hopping spread spectrum (FHSS) is a method of transmitting radio signals by rapidly changing the carrier frequency among many distinct frequencies occupying a large spectral band. The changes are controlled by a code known to both transmitter and receiver. FHSS is used to avoid interference, to prevent eavesdropping, and to enable code-division multiple access (CDMA) communications. The available frequency band is divided into smaller sub-bands. Signals rapidly change ("hop") their carrier frequencies among the center frequencies of these sub-bands in a predetermined order. Interference at a specific frequency will affect the signal only during a short interval. FHSS offers four main advantages over a fixed-frequency transmission: # FHSS signals are highly resistant to narrowband interference because the signal hops to a different frequency band. # Signals are difficult to intercept if the frequency-hopping pattern is not known. # Jamming is also difficult if the p ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Guglielmo Marconi
Guglielmo Giovanni Maria Marconi, 1st Marquis of Marconi (; 25 April 187420 July 1937) was an Italian inventor and electrical engineer, known for his creation of a practical radio wave-based wireless telegraph system. This led to Marconi being credited as the inventor of radio, and he shared the 1909 Nobel Prize in Physics with Karl Ferdinand Braun "in recognition of their contributions to the development of wireless telegraphy".Guglielmo Marconi: The Nobel Prize in Physics 1909 . nobelprize.org Marconi was also an entrepreneur, businessman, and founder of The Wireless Telegraph & Signal Company in the |
Code-division Multiple Access
Code-division multiple access (CDMA) is a channel access method used by various radio communication technologies. CDMA is an example of multiple access, where several transmitters can send information simultaneously over a single communication channel. This allows several users to share a band of frequencies (see bandwidth). To permit this without undue interference between the users, CDMA employs spread spectrum technology and a special coding scheme (where each transmitter is assigned a code). CDMA optimizes the use of available bandwidth as it transmits over the entire frequency range and does not limit the user's frequency range. It is used as the access method in many mobile phone standards. IS-95, also called "cdmaOne", and its 3G evolution CDMA2000, are often simply referred to as "CDMA", but UMTS, the 3G standard used by GSM carriers, also uses "wideband CDMA", or W-CDMA, as well as TD-CDMA and TD-SCDMA, as its radio technologies. It can be also used as a cha ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Rake Receiver
A rake receiver is a radio receiver designed to counter the effects of multipath fading. It does this by using several "sub-receivers" called ''fingers'', that is, several correlators each assigned to a different multipath component. Each finger independently decodes a single multipath component; at a later stage the contribution of all fingers are combined in order to make the most use of the different transmission characteristics of each transmission path. This could very well result in higher signal-to-noise ratio (or Eb/N0) in a multipath environment than in a "clean" environment. The multipath channel through which a radio wave transmits can be viewed as transmitting the original (line of sight) wave pulse through a number of multipath components. Multipath components are delayed copies of the original transmitted wave traveling through a different echo path, each with a different magnitude and time-of-arrival at the receiver. Since each component contains the original infor ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Multipath Propagation
In radio communication, multipath is the propagation phenomenon that results in radio signals reaching the receiving antenna by two or more paths. Causes of multipath include atmospheric ducting, ionospheric reflection and refraction, and reflection from water bodies and terrestrial objects such as mountains and buildings. When the same signal is received over more than one path, it can create interference and phase shifting of the signal. Destructive interference causes fading; this may cause a radio signal to become too weak in certain areas to be received adequately. For this reason, this effect is also known as multipath interference or multipath distortion. Where the magnitudes of the signals arriving by the various paths have a distribution known as the Rayleigh distribution, this is known as Rayleigh fading. Where one component (often, but not necessarily, a line of sight component) dominates, a Rician distribution provides a more accurate model, and this is kno ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Fading
In wireless communications, fading is variation of the attenuation of a signal with various variables. These variables include time, geographical position, and radio frequency. Fading is often modeled as a random process. A fading channel is a communication channel that experiences fading. In wireless systems, fading may either be due to multipath propagation, referred to as multipath-induced fading, weather (particularly rain), or shadowing from obstacles affecting the wave propagation, sometimes referred to as shadow fading. Key concepts The presence of reflectors in the environment surrounding a transmitter and receiver create multiple paths that a transmitted signal can traverse. As a result, the receiver sees the superposition of multiple copies of the transmitted signal, each traversing a different path. Each signal copy will experience differences in attenuation, delay and phase shift while traveling from the source to the receiver. This can result in either c ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Power Spectral Density
The power spectrum S_(f) of a time series x(t) describes the distribution of power into frequency components composing that signal. According to Fourier analysis, any physical signal can be decomposed into a number of discrete frequencies, or a spectrum of frequencies over a continuous range. The statistical average of a certain signal or sort of signal (including noise) as analyzed in terms of its frequency content, is called its spectrum. When the energy of the signal is concentrated around a finite time interval, especially if its total energy is finite, one may compute the energy spectral density. More commonly used is the power spectral density (or simply power spectrum), which applies to signals existing over ''all'' time, or over a time period large enough (especially in relation to the duration of a measurement) that it could as well have been over an infinite time interval. The power spectral density (PSD) then refers to the spectral energy distribution that would ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Eavesdropping
Eavesdropping is the act of secretly or stealthily listening to the private conversation or communications of others without their consent in order to gather information. Etymology The verb ''eavesdrop'' is a back-formation from the noun ''eavesdropper'' ("a person who eavesdrops"), which was formed from the related noun ''eavesdrop'' ("the dripping of water from the eaves of a house; the ground on which such water falls"). An eavesdropper was someone who would hang from the eave of a building so as to hear what is said within. The PBS documentaries ''Inside the Court of Henry VIII'' (April 8, 2015) and ''Secrets of Henry VIII’s Palace'' (June 30, 2013) include segments that display and discuss "eavedrops", carved wooden figures Henry VIII had built into the eaves (overhanging edges of the beams in the ceiling) of Hampton Court to discourage unwanted gossip or dissension from the King's wishes and rule, to foment paranoia and fear, and demonstrate that everything said there was ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
