|
Serving Area Interface
The serving area interface or service area interface (SAI) is an outdoor enclosure or metal box that allows access to telecommunications wiring. Alternate names *Access point (AP) *Cabinet (cab) *B-box (breakout box) *Cross box *Cross-connect box *Jumper wire interface (JWI) *Outside plant interface (OPI) *Pedestal (ped) *Primary cross-connection point (PCP) (UK)"Multimedia Telecommunications" (BT Telecommunications Series), B. Whyte (Ed.), Springer 1997 *Secondary cross-connection point (SCP) (UK) *Telecom cabinet Function The SAI provides the termination of individual twisted pairs of a telephony local loop for onward connection back to the nearest telephone exchange (US: " central office" (CO)) or remote switch, or first to transmission equipment such as a subscriber loop carrier multiplexer and then to the exchange main distribution frame (MDF). In the United Kingdom, the components from the PCP onwards to the customer are known as "D-side" (distribution side), and from ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Enclosure (electrical)
An electrical enclosure is a cabinet for electrical or electronic equipment to mount switches, knobs and displays and to prevent electrical shock to equipment users and protect the contents from the environment. The enclosure is the only part of the equipment which is seen by users. It may be designed not only for its utilitarian requirements, but also to be pleasing to the eye. Regulations may dictate the features and performance of enclosures for electrical equipment in hazardous areas, such as petrochemical plants or coal mines. Electronic packaging may place many demands on an enclosure for heat dissipation, radio frequency interference and electrostatic discharge protection, as well as functional, esthetic and commercial constraints. Standards Internationally, IEC 60529 classifies the ingress protection rating (IP Codes) of enclosures. In the United States, the National Electrical Manufacturers Association (NEMA) publishes NEMA enclosure type standards for the performa ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Point Of Appearance
Point of appearance is a generic term for any point in a telephone/data circuit from which a technician can test or pull stats. Some appearances are virtual, such as a Digital cross connect system computer terminal. Others are physical, like a punch down COSMIC frame where a technician can place a test set, or a heat coil socket. In the outside plant there is an appearance at the cross box, pedestal, and network interface device. The ultimate appearance is the telephone or other customer premises equipment (CPE). See also *Demarcation point *Point of presence A point of presence (PoP) is an artificial demarcation point or network interface point between communicating entities. A common example is an ISP point of presence, the local access point that allows users to connect to the Internet with their ... Communication circuits {{Tech-stub ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Twisted Pair
Twisted pair cabling is a type of wiring used for communications in which two conductors of a single circuit are twisted together for the purposes of improving electromagnetic compatibility. Compared to a single conductor or an untwisted balanced pair, a twisted pair reduces electromagnetic radiation from the pair and crosstalk between neighboring pairs and improves rejection of external electromagnetic interference. It was invented by Alexander Graham Bell. For additional noise immunity, twisted-pair cabling may be shielded. Cable with shielding is known as shielded twisted pair (STP) and without as unshielded twisted pair (UTP). Explanation A twisted pair can be used as a balanced line, which as part of a balanced circuit can greatly reduce the effect of noise currents induced on the line by coupling of electric or magnetic fields. The idea is that the currents induced in each of the two wires are very nearly equal. The twisting ensures that the two wires are on ave ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Local Loop
In telephony, the local loop (also referred to as the local tail, subscriber line, or in the aggregate as the last mile) is the physical link or circuit that connects from the demarcation point of the customer premises to the edge of the common carrier or telecommunications service provider's network. At the edge of the carrier access network in a traditional public telephone network, the local loop terminates in a circuit switch housed in an incumbent local exchange carrier or telephone exchange. Infrastructure Traditionally, the local loop was an electrical circuit in the form of a single pair of conductors from the telephone on the customer's premises to the local telephone exchange. Single-wire earth return lines had been used in some countries until the introduction of electric tramways from the 1900s made them unusable. Historically the first section was often an aerial open-wire line, with several conductors attached to porcelain insulators on cross-arms on "telegra ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Telephone Exchange
A telephone exchange, telephone switch, or central office is a telecommunications system used in the public switched telephone network (PSTN) or in large enterprises. It interconnects telephone subscriber lines or virtual circuits of digital systems to establish telephone calls between subscribers. In historical perspective, telecommunication terms have been used with different semantics over time. The term ''telephone exchange'' is often used synonymously with ''central office'', a Bell System term. Often, a ''central office'' is defined as a building used to house the inside plant equipment of potentially several telephone exchanges, each serving a certain geographical area. Such an area has also been referred to as the exchange or exchange area. In North America, a central office location may also be identified as a ''wire center'', designating a facility to which a telephone is connected and obtains dial tone. For business and billing purposes, telecommunication carriers defi ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Main Distribution Frame
In telephony, a main distribution frame (MDF or main frame) is a signal distribution frame for connecting equipment (inside plant) to cables and subscriber carrier equipment (outside plant). Overview The MDF is a termination point within the local telephone exchange where exchange equipment and terminations of local loops are connected by jumper wires at the MDF. All cable copper pairs supplying services through user telephone lines are terminated at the MDF and distributed through the MDF to equipment within the local exchange e.g. repeaters and DSLAM. Cables to intermediate distribution frames (IDF) terminate at the MDF. Trunk cables may terminate on the same MDF or on a separate trunk main distribution frame (TMDF). Like other distribution frames the MDF provides flexibility in assigning facilities, at lower cost and higher capacity than a patch panel. The most common kind of large MDF is a long steel rack accessible from both sides. On one side, termination blocks are ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
D-side (UK Telephone Cabling)
In a UK telephone line, the term D-side or distribution side refers at any point on a local loop connection between a customer's premises and a telephone exchange to the wires (or pairs of copper wires) leaving into the direction of the customer. Conversely, E-side is the exchange side of a telephone line, that is the wires leaving any connection point into the direction of the telephone exchange. These terms are used, for example, by technicians of Openreach, Virgin Media and other UK phone companies when referring to wiring connections going from a Primary Connection Point (PCP) telecoms cabinet to a point closer to a residence or business known as the "Distribution Point" (DP). On its way, it may pass through a Secondary Connection Point (SCP) telecoms cabinet, sometimes known as pillars, where again the wires going in the direction of the customer are called D side and those going back to exchange are called E side. In the event of a broadband or phone line problem, techni ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Maintenance Hole
A manhole (utility hole, maintenance hole, or sewer hole) is an opening to a confined space such as a shaft, utility vault, or large vessel. Manholes are often used as an access point for an underground public utility, allowing inspection, maintenance, and system upgrades. The majority of underground services have manholes, including water, sewers, telephone A telephone is a telecommunications device that permits two or more users to conduct a conversation when they are too far apart to be easily heard directly. A telephone converts sound, typically and most efficiently the human voice, into e ..., electricity, storm drains, district heating, and natural gas, gas. Manholes are generally found in urban areas, in streets and occasionally under sidewalks. In rural and undeveloped areas, services such as telephone and electricity are usually carried on utility poles or even Electricity pylon, pylons rather than underground. In Australia, ''manhole'' also commonly refe ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
DSLAM
A digital subscriber line access multiplexer (DSLAM, often pronounced ''DEE-slam'') is a network device, often located in telephone exchanges, that connects multiple customer digital subscriber line (DSL) interfaces to a high-speed digital communications channel using multiplexing techniques. Its cable internet (DOCSIS) counterpart is the Cable modem termination system. Path taken by data to DSLAM # Customer premises: DSL modem terminating the ADSL, SHDSL or VDSL circuit and providing a LAN or interface to a single computer or LAN segment. # Local loop: the telephone company wires from a customer to the telephone exchange or to a serving area interface, often called the " last mile" (LM). # Telephone exchange: #* Main distribution frame (MDF): a wiring rack that connects outside subscriber lines with internal lines. It is used to connect public or private lines coming into the building to internal networks. At the telco, the MDF is generally in proximity to the cable vau ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Remote Concentrator
In modern telephony a remote concentrator, remote concentrator unit (RCU), or remote line concentrator (RLC) is a concentrator at the lowest level in the telephone switch hierarchy. Subscribers' analogue telephone/PSTN lines are terminated on concentrators. They have three main functions: * Digitize: convert voice (and sometimes data) from analogue to a digital form. * Connect off-hook lines to the local exchange — the concentration function. * Multiplex, interleaving many calls together on a single wire or optical fiber. via Web Archive Only a few hundred telephone lines attach to each remote concentrator. In North America concentrators are loc ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
.jpg "Click for more on -> Telephone Exchange")
_(14733380746).jpg "Click for more on -> Main Distribution Frame")
