Rack-and-pinion Steering
   HOME
*



picture info

Rack-and-pinion Steering
A rack and pinion is a type of linear actuator that comprises a circular gear (the '' pinion'') engaging a linear gear (the ''rack''). Together, they convert rotational motion into linear motion. Rotating the pinion causes the rack to be driven in a line. Conversely, moving the rack linearly will cause the pinion to rotate. A rack and pinion drive can use both straight and helical gears. Though some suggest helical gears are quieter in operation, no hard evidence supports this theory. Helical racks, while being more affordable, have proven to increase side torque on the datums, increasing operating temperature leading to premature wear. Straight racks require a lower driving force and offer increased torque and speed per percentage of gear ratio which allows lower operating temperature and lessens viscal friction and energy use. The maximum force that can be transmitted in a rack and pinion mechanism is determined by the tooth pitch and the size of the pinion as well as the gear ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  




Rack And Pinion Animation
Rack or racks may refer to: Storage and installation * Amp rack, short for amplifier rack, a piece of furniture in which amplifiers are mounted * Bicycle stand, Bicycle rack, a frame for storing bicycles when not in use * Bustle rack, a type of storage bin mounted on armored fighting vehicles * Drying rack, for hanging clothing to dry * Firearm rack, for storing firearms * Pallet racking, structural racks (usually steel) for storing palletised loads * Rack (billiards), for placing billiard balls in their starting positions * Roof rack, a system used to carry items on top of a car * Standardized equipment racks ** 19-inch rack and 23-inch rack, commonly used for computer, communications, and AV equipment ** Rack unit, equipment sizing measure ** International Standard Payload Rack, used in spaceflight * Toast rack, a serving piece Media * The Rack (album), ''The Rack'' (album), debut album by Asphyx *The Rack (1915 film), ''The Rack'' (1915 film), an American silent drama fil ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


Steer System
Steer, Steers or Steering may refer to: Animals * Steer or bullock, castrated male cattle * Ox, a steer used as a draft animal People * Steer (surname) * Steers (surname) Places * Steer Creek (West Virginia), a tributary of the Little Kanawha River in central West Virginia in the United States * Steer Island, a former bar island in Summers County, West Virginia * Steer Stadium, a baseball park located in Graham, Texas Other uses * Steering, mechanism used to turn a vehicle * "Steer" (song), a 2007 song by Missy Higgins * Steers Steers is one of South Africa's most recognizable quick-service restaurant brands. The company is well known for serving burgers and chips. Other menu items include chicken burgers, ribs as well as ice cream and milkshakes, among other things. ..., South African fast food chain * STEER, a variant of PEST, a technique used in business analysis See also * Steers (other) * Steerage (other) {{disambiguation ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


picture info

Actuator
An actuator is a component of a machine that is responsible for moving and controlling a mechanism or system, for example by opening a valve. In simple terms, it is a "mover". An actuator requires a control device (controlled by control signal) and a source of energy. The control signal is relatively low energy and may be electric voltage or current, pneumatic, or hydraulic fluid pressure, or even human power. Its main energy source may be an electric current, hydraulic pressure, or pneumatic pressure. The Control device is usually a valve. When it receives a control signal, an actuator responds by converting the source's energy into mechanical motion. In the ''electric'', ''hydraulic'', and ''pneumatic'' sense, it is a form of automation or automatic control. History The history of the pneumatic actuation system and the hydraulic actuation system dates to around the time of World War II (1938). It was first created by Xhiter Anckeleman who used his knowledge of engines and ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


picture info

Pneumatic Rack And Pinion Actuators
Pneumatics (from Greek ‘wind, breath’) is a branch of engineering that makes use of gas or pressurized air. Pneumatic systems used in industry are commonly powered by compressed air or compressed inert gases. A centrally located and electrically-powered compressor powers cylinders, air motors, pneumatic actuators, and other pneumatic devices. A pneumatic system controlled through manual or automatic solenoid valves is selected when it provides a lower cost, more flexible, or safer alternative to electric motors, and hydraulic actuators. Pneumatics also has applications in dentistry, construction, mining, and other areas. Gases used in pneumatic systems Pneumatic systems in fixed installations, such as factories, use compressed air because a sustainable supply can be made by compressing atmospheric air. The air usually has moisture removed, and a small quantity of oil is added at the compressor to prevent corrosion and lubricate mechanical components. Factory-plumbed ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


picture info

Mountain Railway
A mountain railway is a railway that operates in a mountainous region. It may operate through the mountains by following mountain valleys and tunneling beneath mountain passes, or it may climb a mountain to provide transport to and from the summit. Mountain railways often use narrow gauge tracks to allow for tight curves in the track and reduce tunnel size and structure gauge, and hence construction cost and effort. Where mountain railways need to climb steep gradients, they may use steep grade railway technology, or even operate as funicular railways. List of mountain railways Argentina * Mendoza to Los Andes, Chile, see Chile below Australia * Glenreagh Mountain Railway * Mt Morgan Rack Railway - abandoned in 1955. * Skitube Alpine Railway * West Coast Wilderness Railway Austria * Achensee Railway * Arlberg Railway * Mariazell Railway * Pöstlingberg Railway * Semmering Railway - A world Heritage Site * Schafberg Railway * Schneeberg Railway Bolivia * Ferr ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


picture info

Forging
Forging is a manufacturing process involving the shaping of metal using localized compressive forces. The blows are delivered with a hammer (often a power hammer) or a die. Forging is often classified according to the temperature at which it is performed: cold forging (a type of cold working), warm forging, or hot forging (a type of hot working). For the latter two, the metal is heated, usually in a forge. Forged parts can range in weight from less than a kilogram to hundreds of metric tons.Degarmo, p. 389 Forging has been done by smiths for millennia; the traditional products were kitchenware, hardware, hand tools, edged weapons, cymbals, and jewellery. Since the Industrial Revolution, forged parts are widely used in mechanisms and machines wherever a component requires high strength; such forgings usually require further processing (such as machining) to achieve a finished part. Today, forging is a major worldwide industry. History Forging is one of the oldest known me ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


Arthur Ernest Bishop
Arthur Ernest Bishop AM (19172006) was a noted Australian engineer and inventor. Life Bishop was born in Sydney, New South Wales in 1917. He demonstrated highly innovative capabilities during the Second World War relating to overcoming problems of instability of aircraft tail-wheel landing gear during take-off and landing, and was awarded license fees for his inventions. These were significant and partly as a result, he was able in 1954 to move to Detroit, Michigan, United States, with ideas and patents to improve steering systems for automobiles, and for the next two decades introduced improvements into various vehicles around the world mainly in aspects of hydraulically powered and variable-ratio steering. In order to license the ideas or supply purpose-built manufacturing equipment, he developed both lower-cost methods for mass production, while also giving improvements to steering feel and vehicle response. By the 1970s he had returned to Australia as a base, and had develo ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


picture info

Power Steering
A power steering is a mechanical device equipped on a motor vehicle that helps drivers steer the vehicle by reducing steering effort needed to turn the steering wheel, making it easier for the vehicle to turn or maneuver at lower speeds. Hydraulic or electric actuators add controlled energy to the steering mechanism, so the driver can provide less effort to turn the steered wheels when driving at typical speeds, and reduce considerably the physical effort necessary to turn the wheels when a vehicle is stopped or moving slowly. Power steering can also be engineered to provide some artificial feedback of forces acting on the steered wheels. Hydraulic power steering systems for cars augment steering effort via an actuator, a hydraulic cylinder that is part of a servo system. These systems have a direct mechanical connection between the steering wheel and the linkage that steers the wheels. This means that power-steering system failure (to augment effort) still permits the vehicle ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


picture info

Feedback
Feedback occurs when outputs of a system are routed back as inputs as part of a chain of cause-and-effect that forms a circuit or loop. The system can then be said to ''feed back'' into itself. The notion of cause-and-effect has to be handled carefully when applied to feedback systems: History Self-regulating mechanisms have existed since antiquity, and the idea of feedback had started to enter economic theory in Britain by the 18th century, but it was not at that time recognized as a universal abstraction and so did not have a name. The first ever known artificial feedback device was a float valve, for maintaining water at a constant level, invented in 270 BC in Alexandria, Egypt. This device illustrated the principle of feedback: a low water level opens the valve, the rising water then provides feedback into the system, closing the valve when the required level is reached. This then reoccurs in a circular fashion as the water level fluctuates. Centrifugal governors were ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


picture info

Backlash (gear)
In mechanical engineering, backlash, sometimes called lash, play, or slop, is a clearance or lost motion in a mechanism caused by gaps between the parts. It can be defined as "the maximum distance or angle through which any part of a mechanical system may be moved in one direction without applying appreciable force or motion to the next part in mechanical sequence."p. 1-8 An example, in the context of gears and gear trains, is the amount of clearance between mated gear teeth. It can be seen when the direction of movement is reversed and the slack or lost motion is taken up before the reversal of motion is complete. It can be heard from the railway couplings when a train reverses direction. Another example is in a valve train with mechanical tappets, where a certain range of lash is necessary for the valves to work properly. Depending on the application, backlash may or may not be desirable. Some amount of backlash is unavoidable in nearly all reversing mechanical couplings, al ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


picture info

Recirculating Ball
Recirculating ball, also known as recirculating ball and nut or worm and sector, is a steering mechanism commonly found in older automobiles, off-road vehicles, and some trucks. Most newer cars use the more economical rack and pinion steering instead, but some upmarket manufacturers (such as BMW and Mercedes-Benz) held on to the design until well into the 1990s for the durability and strength inherent in the design. A few, including Chrysler, General Motors and Lada, still use this technology in certain models including the Jeep Wrangler{{Cite book , url=https://books.google.com/books?id=HlbCM7VEmroC&q=wrangler+Recirculating+ball&pg=PA91 , title=High-Performance Jeep Wrangler TJ Builder's Guide, isbn=9781932494266, last1=Lee, first1=Christian, year=2007 and the Lada Niva. Mechanism The recirculating ball steering mechanism contains a worm gear inside a block with a threaded hole in it; this block has gear teeth cut into the outside to engage the sector shaft (also called a ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]