|
Pin Loom
Pin weaving is a form of small-scale weaving traditionally done on a frame made of pins; the warp and weft are wrapped around the pins. Pin-woven textiles have a selvage edge all the way around. Pin looms were popular from the 1930s to the 1960s. Quite elaborate patterns were published, especially in the 1930s. 21st-century designs often focus more on the fiber than on elaborate patterning; for instance, yarns with precisely repeating colours can be used to make plaids. Equipment The equipment needed is minimal, consisting of pins, a pinnable board, and a bodkin needle. It can also be done on some types of spool knitting, knitting frame. There are also commercial looms made for pin weaving. Smooth, rounded pin tops are desirable; they don't snag the yarn or fingers. Pins are usually spaced ¼ to ⅛ of an inch apart (3-7 millimeters apart). 4-8 pins per inch (3-6 pins every two centimeters), The pins may be numbered (with numbers written beside the pins), and the lower-left co ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Another Collection Of Zoom Loom Squares
Another or variant may refer to: * anOther or Another Magazine, culture and fashion magazine * Another (novel), ''Another'' (novel), a Japanese horror novel ** Another (film), ''Another'' (film), a Japanese 2012 live-action film based on the novel * Another River, a river in the U.S. state of Alaska * A. N. Other, a pseudonym See also * Yet another * Indefinite pronoun * English determiners * Other (other) * Others (other) * {{disambiguation ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Cuff
A cuff is a layer of fabric at the lower edge of the sleeve of a garment (shirt, coat, jacket, etc.) at the wrist, or at the ankle end of a trouser leg. The function of turned-back cuffs is to protect the cloth of the garment from fraying, and, when frayed, to allow the cuffs to be readily repaired or replaced, without changing the garment. Cuffs are made by turning back (folding) the material, or a separate band of material can be sewn on, or worn separately, attached either by buttons or studs. A cuff may display an ornamental border or have lace or some other trimming. In US usage, the word ''trouser cuffs'' refers to the folded, finished bottoms of the legs of a pair of trousers. In the UK, while this usage is now sometimes followed, the traditional term for the turned up trouser hem is 'turnup'. History Between the 15th and 18th centuries, rich men often wore sleeve cuffs ornamented with fine lace. Still today, Catholic clergy have the cuffs of their choir dress ornamen ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Shed (weaving)
In weaving, the shed is the temporary separation between upper and lower warp yarns through which the weft is woven. The shed is created to make it easy to interlace the weft into the warp and thus create woven fabric. Most types of looms have some sort of device which separates some of the warp threads from the others. This separation is called the shed, and allows for a shuttle carrying the weft thread to move through the shed perpendicular to the warp threads. Which threads are raised and which are lowered are changed after each pass of the shuttle. The process of weaving can be simplified to a series of four steps: the shed is raised, the shuttle is passed through, the shed is closed, and the weft thread is beaten into place. These steps are then repeated, with a different set of threads being raised so as to interlace the warp and weft. The term ''shedding'' refers to the action of creating a shed. A ''shedding device'' is the device used to raise or open the shed. Creating ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Loom
A loom is a device used to weave cloth and tapestry. The basic purpose of any loom is to hold the warp threads under tension to facilitate the interweaving of the weft threads. The precise shape of the loom and its mechanics may vary, but the basic function is the same. Etymology and usage The word "loom" derives from the Old English ''geloma'', formed from ''ge-'' (perfective prefix) and ''loma'', a root of unknown origin; the whole word ''geloma'' meant a utensil, tool, or machine of any kind. In 1404 "lome" was used to mean a machine to enable weaving thread into cloth. By 1838 "loom" had gained the additional meaning of a machine for interlacing thread. Weaving Weaving is done by intersecting the longitudinal threads, the warp, i.e. "that which is thrown across", with the transverse threads, the weft, i.e. "that which is woven". The major components of the loom are the warp beam, heddles, harnesses or shafts (as few as two, four is common, sixteen not unheard of), s ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Darning Loom
Darning is a sewing technique for repairing holes or worn areas in fabric or knitting using needle and thread alone. It is often done by hand, but it is also possible to darn with a sewing machine. Hand darning employs the darning stitch, a simple running stitch in which the thread is "woven" in rows along the grain of the fabric, with the stitcher reversing direction at the end of each row, and then filling in the framework thus created, as if weaving. Darning is a traditional method for repairing fabric damage or holes that do not run along a seam, and where patching is impractical or would create discomfort for the wearer, such as on the heel of a sock. Darning also refers to any of several needlework techniques that are worked using darning stitches: *Pattern darning is a type of embroidery that uses parallel rows of straight stitches of different lengths to create a geometric design. *Net darning, also called filet lace, is a 19th-century technique using stitching ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Pleat
A pleat (plait in older English) is a type of fold formed by doubling fabric back upon itself and securing it in place. It is commonly used in clothing and upholstery to gather a wide piece of fabric to a narrower circumference. Pleats are categorized as ''pressed'', that is, ironed or otherwise heat-set into a sharp crease, or ''unpressed'', falling in soft rounded folds. Pleats sewn into place are called tucks. Types Accordion Accordion pleats or knife pleats are a form of tight pleating which allows the garment to expand its shape when moving. Accordion pleating is also used for some dress sleeves, such as pleating the end of the elbow, with the fullness of the pleat gathered closely at the cuff. This form of pleating inspired the "skirt dancing" of Loie Fuller. Accordion pleats may also be used in hand fans. Box Box pleats are knife pleats back-to-back, and have a tendency to spring out from the waistline.Picken, Mary Brooks, ''The Fashion Dictionary'', p. 257 They ha ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Bias (textile)
For woven textiles, grain refers to the orientation of the weft and warp threads. The three named grains are straight grain, cross grain, and the bias grain. In sewing, a pattern piece can be cut from fabric in any orientation, and the chosen grain or orientation will affect the way the fabric hangs and stretches and thus the fit of a garment. Generally speaking a piece is said to be cut on a particular grain when the longest part of the pattern or the main seams of the finished piece are aligned with that grain. Non-woven materials such as felt, interfacing or leather do not have a grain. Straight grain The straight grain is oriented parallel with the warp threads and the selvedge. The straight grain typically has less stretch than the crossgrain since the warp threads will be pulled tighter than the weft during weaving. Most garments are cut with the straight grain oriented top to bottom.Howard, Pamela. "For woven fabrics, it's important to go with the grain". Threads (Taunton Pre ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Sewing Pattern
In sewing and fashion design, a pattern is the template from which the parts of a garment are traced onto woven or knitted fabrics before being cut out and assembled. Patterns are usually made of paper, and are sometimes made of sturdier materials like paperboard or cardboard if they need to be more robust to withstand repeated use. The process of making or cutting patterns is sometimes compounded to the one-word Patternmaking, but it can also be written pattern(-)making or pattern cutting. A sloper pattern (home sewing) or block pattern (industrial production) is a custom-fitted, basic pattern from which patterns for many different styles can be developed. The process of changing the size of a finished pattern is called grading. Several companies, like Butterick and Simplicity, specialize in selling pre-graded patterns directly to consumers who will sew the patterns at home. Commercial clothing manufacturers make their own patterns in-house as part of their design and producti ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Japanese Clothing
There are typically two types of clothing worn in Japan: traditional clothing known as , including the national dress of Japan, the kimono, and , which encompasses all else not recognised as either national dress or the dress of another country. Traditional Japanese fashion represents a long-standing history of traditional culture, encompassing colour palettes developed in the Heian period, silhouettes adopted from Tang dynasty clothing and cultural traditions, motifs taken from Japanese culture, nature and traditional literature, the use of types of silk for some clothing, and styles of wearing primarily fully-developed by the end of the Edo period. The most well-known form of traditional Japanese fashion is the kimono, with the term ''kimono'' translating literally as "something to wear" or "thing worn on the shoulders".Assmann, Stephanie. "Between Tradition and Innovation: The Reinvention of the Kimono in Japanese Consumer Culture." ''Fashion Theory: The Journal of Dress, Bod ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Gusset
In sewing, a gusset is a triangular or rhomboidal piece of fabric inserted into a seam to add breadth or reduce stress from tight-fitting clothing. Gussets were used at the shoulders, underarms, and hems of traditional shirts and chemises made of rectangular lengths of linen to shape the garments to the body. Gussets are used in manufacturing of modern tights and pantyhose to add breadth at the crotch seam. As with other synthetic underwear, these gussets are often made of moisture-wicking breathable fabrics such as cotton, to keep the genital area dry and ventilated.US 20030196252 , Sara Blakely, "Two-ply body-smoothing undergarment", issued 2003-10-23 Preve ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
