P-83 Wanad
   HOME
*





P-83 Wanad
The P-83 Wanad ( Pl. Vanadium) is a single-action and double-action Polish semi-automatic pistol, chambered for the 9×18mm Makarov cartridge and designed by Ryszard Chełmicki and Marian Gryszkiewicz of the state research institute Ośrodek Badawczo-Rozwojowy in Radom. The P-83 succeeded the P-64 as the sidearm for the Polish Army and police. The P-83 is still in limited use by both the Polish police and the Polish military but it has been mostly replaced by Glock 19 pistols in Police service and partially by the indigenous WIST 94 pistol in the Polish military. Design details The P-83 is a double-action/single-action straight-blowback operated pistol with a single stack 8-round box magazine. It is formed primarily of sheet metal stampings which have been blued. The pistol has an external case extractor on the slide which actuates a loaded chamber indicator (which, both visually and tactilely, indicates the presence of a round in the chamber). There is a manual safety ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


Polish People's Republic
The Polish People's Republic ( pl, Polska Rzeczpospolita Ludowa, PRL) was a country in Central Europe that existed from 1947 to 1989 as the predecessor of the modern Republic of Poland. With a population of approximately 37.9 million near the end of its existence, it was the second-most populous communist and Eastern Bloc country in Europe. It was also one of the main signatories of the Warsaw Pact alliance. The largest city and official capital since 1947 was Warsaw, followed by the industrial city of Łódź and cultural city of Kraków. The country was bordered by the Baltic Sea to the north, the Soviet Union to the east, Czechoslovakia to the south, and East Germany to the west. The Polish People's Republic was a socialist one-party state, with a unitary Marxist–Leninist government headed by the Polish United Workers' Party (PZPR). The country's official name was the "Republic of Poland" (') between 1947 and 1952 in accordance with the transitional Small Constitutio ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


picture info

WIST-94
The WIST-94 is a semi-automatic pistol produced in Poland. Development WIST-94 was designed at Military Institute of Armament Technology (WITU) under the code name Piryt (Pyrite in Polish). Two prototypes were made in 1992, which differ in the barrel locking system: Model A01 used a rotary-locking system and Model B01 using conventional, Browning-type tilting barrel locking. B01 was the only one to complete testing but the development was temporarily halted due to the military cutting off funding. Financed by WITU and Prexer company, the project continued and in 1994 a new prototype was developed. Called WIST-94 it is based on the B01 prototype. The new pistol was chosen by the Polish military as its new standard sidearm. Design details The WIST-94 is a semi-automatic pistol chambered for 9mm Parabellum round. It uses the Browning cam-lug system of operation. The polygonal-rifled barrel is locked to the slide by three locking lugs machined into the upper part of the barrel. The ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


380 ACP Semi-automatic Pistols
38 may refer to: *38 (number), the natural number following 37 and preceding 39 *one of the years 38 BC, AD 38, 1938, 2038 *.38, a caliber of firearms and cartridges **.38 Special, a revolver cartridge *'' Thirty-Eight: The Hurricane That Transformed New England'', a 2016 book by Stephen Long *"Thirty Eight", a song by Karma to Burn from the album ''Almost Heathen ''Almost Heathen'' is the third studio album by the stoner rock band Karma to Burn, released in 2001 via Spitfire Records. It was the last album released before their seven-year disbandment in 2002. The album was reissued in 2022 by Heavy Psych Sou ...
'', 2001 {{Numberdis ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


picture info

32 ACP Semi-automatic Pistols
3 (three) is a number, numeral and digit. It is the natural number following 2 and preceding 4, and is the smallest odd prime number and the only prime preceding a square number. It has religious or cultural significance in many societies. Evolution of the Arabic digit The use of three lines to denote the number 3 occurred in many writing systems, including some (like Roman and Chinese numerals) that are still in use. That was also the original representation of 3 in the Brahmic (Indian) numerical notation, its earliest forms aligned vertically. However, during the Gupta Empire the sign was modified by the addition of a curve on each line. The Nāgarī script rotated the lines clockwise, so they appeared horizontally, and ended each line with a short downward stroke on the right. In cursive script, the three strokes were eventually connected to form a glyph resembling a with an additional stroke at the bottom: ३. The Indian digits spread to the Caliphate in the 9th ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  




P-83 Wanad Pistol (Polish) Civilian Export Edition
P83 may refer to: * Bell XP-83, an American prototype fighter aircraft * FB P-83 Wanad, a pistol * BRM P83, a Formula One racing car * , a patrol boat of the Royal Australian Navy * , a submarine of the Royal Navy * , a corvette of the Indian Navy * Papyrus 83 Papyrus 83 (in the Gregory-Aland numbering), designated by 𝔓83, is a copy of the New Testament in Greek. It is a papyrus manuscript of the Gospel of Matthew. The surviving texts of Matthew are verses 20:23-25,30-31; 23:39-24:1,6. The manuscrip ..., a biblical manuscript * P83, a state regional road in Latvia {{disambiguation ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


picture info

Revolver
A revolver (also called a wheel gun) is a repeating handgun that has at least one barrel and uses a revolving cylinder containing multiple chambers (each holding a single cartridge) for firing. Because most revolver models hold up to six rounds of cartridge before needing to reload, revolvers are also commonly called six shooters. Before firing, cocking the revolver's hammer partially rotates the cylinder, indexing one of the cylinder chambers into alignment with the barrel, allowing the bullet to be fired through the bore. The hammer cocking in nearly all revolvers are manually driven, and can be achieved either by the user using the thumb to directly pull back the hammer (as in single-action), via internal linkage relaying the force of the trigger-pull (as in double-action), or both (as in double/single-action). By sequentially rotating through each chamber, the revolver allows the user to fire multiple times until having to reload the gun, unlike older single-shot fir ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


picture info

Firing Pin
A firing pin or striker is a part of the firing mechanism of a firearm that impacts the primer in the base of a cartridge and causes it to fire. In firearms terminology, a striker is a particular type of firing pin where a compressed spring acts directly on the firing pin to provide the impact force rather than it being struck by a hammer. The terms may also be used for a component of equipment or a device which has a similar function. Such equipment or devices include: artillery, munitions and pyrotechnics. Firearms The typical firing pin is a thin, simple rod with a hardened, rounded tip that strikes and crushes the primer. The rounded end ensures the primer is indented rather than pierced (to contain propellant gasses). It sits within a hole through the breechblock and is struck by the hammer when the trigger is "pulled". A light firing-pin spring is often used to keep the firing pin rearward. It may be termed a ''firing-pin return spring'', since it returns it to t ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


picture info

Safety (firearms)
Close-up shot of a safety of an M16A2 rifle In firearms, a safety or safety catch is a mechanism used to help prevent the accidental discharge of a firearm, helping to ensure safer handling. Safeties can generally be divided into subtypes such as internal safeties (which typically do not receive input from the user) and external safeties (which typically allow the user to give input, for example, toggling a lever from "on" to "off" or something similar). Sometimes these are called "passive" and "active" safeties (or "automatic" and "manual"), respectively. Firearms with the ability to allow the user to select various fire modes may have separate switches for safety and for mode selection (e.g. Thompson submachine gun) or may have the safety integrated with the mode selector as a fire selector with positions from safe to semi-automatic to full-automatic fire (e.g. M16). Some firearms manufactured after the late 1990s and early 2000s include a mandatory integral locking mecha ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


picture info

Loaded Chamber Indicator
file:M16A2 Safety Closeup.jpg, Close-up shot of a safety of an M16 rifle, M16A2 rifle In firearms, a safety or safety catch is a mechanism used to help prevent the accidental discharge of a firearm, helping to ensure safer handling. Safeties can generally be divided into subtypes such as internal safeties (which typically do not receive input from the user) and external safeties (which typically allow the user to give input, for example, toggling a lever from "on" to "off" or something similar). Sometimes these are called "passive" and "active" safeties (or "automatic" and "manual"), respectively. Firearms with the ability to allow the user to Selective fire, select various fire modes may have separate switches for safety and for mode selection (e.g. Thompson submachine gun) or may have the safety integrated with the mode selector as a fire selector with positions from safe to semi-automatic to full-automatic fire (e.g. M16 rifle, M16). Some firearms manufactured after the late ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


picture info

Bluing (steel)
Bluing is a passivation process in which steel is partially protected against rust using a black oxide coating. It is named after the blue-black appearance of the resulting protective finish. Bluing involves an electrochemical conversion coating resulting from an oxidizing chemical reaction with iron on the surface selectively forming magnetite (), the black oxide of iron. In comparison, rust, the red oxide of iron (), undergoes an extremely large volume change upon hydration; as a result, the oxide easily flakes off causing the typical reddish rusting away of iron. Black oxide provides minimal protection against corrosion, unless also treated with a water-displacing oil to reduce wetting and galvanic action. In colloquial use, thin coatings of black oxide are often termed 'gun bluing', while heavier coatings are termed 'black oxide'. Both refer to the same chemical process for providing true gun bluing. Overview Various processes are used for the oxidizing process. "Cold ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


Stamping (metalworking)
Stamping (also known as pressing) is the process of placing flat sheet metal in either blank or coil form into a stamping press where a tool and die surface forms the metal into a net shape. Stamping includes a variety of sheet-metal forming manufacturing processes, such as punching using a machine press or stamping press, blanking, embossing, bending, flanging, and coining. This could be a single stage operation where every stroke of the press produces the desired form on the sheet metal part, or could occur through a series of stages. The process is usually carried out on sheet metal, but can also be used on other materials, such as polystyrene. Progressive dies are commonly fed from a coil of steel, coil reel for unwinding of coil to a straightener to level the coil and then into a feeder which advances the material into the press and die at a predetermined feed length. Depending on part complexity, the number of stations in the die can be determined. Stamping is usually ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]