|
Lancair Mako
The Lancair Mako is an American amateur-built aircraft designed and produced by Lancair of Uvalde, Texas, introduced at AirVenture in 2017. The aircraft was first flown on 18 July 2017 and is supplied as a kit for amateur construction. It is named after the shark. The Mako was the first new design from Lancair since the company's purchase by Mark and Conrad Huffstutler and the company's relocation to Texas from Redmond, Oregon in 2017. The design is a development of the Lancair IV and Lancair ES and is related to the Columbia 300 and the later Cessna 400. The design was intended to compete with the type certified Cirrus SR22 and the now out-of-production Cessna TTx, with higher performance for half the price. Design and development The aircraft features a cantilever low-wing, a four-seat enclosed cabin accessed by doors, tricycle landing gear with an optional automatic retractable fully castering nose wheel, main landing gear with wheel pants and a single engine in tractor ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
WikiProject Aircraft
A WikiProject, or Wikiproject, is a Wikimedia movement affinity group for contributors with shared goals. WikiProjects are prevalent within the largest wiki, Wikipedia, and exist to varying degrees within sister projects such as Wiktionary, Wikiquote, Wikidata, and Wikisource. They also exist in different languages, and translation of articles is a form of their collaboration. During the COVID-19 pandemic, CBS News noted the role of Wikipedia's WikiProject Medicine in maintaining the accuracy of articles related to the disease. Another WikiProject that has drawn attention is WikiProject Women Scientists, which was profiled by '' Smithsonian'' for its efforts to improve coverage of women scientists which the profile noted had "helped increase the number of female scientists on Wikipedia from around 1,600 to over 5,000". On Wikipedia Some Wikipedia WikiProjects are substantial enough to engage in cooperative activities with outside organizations relevant to the field at issue. For e ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Cessna TTx
The Cessna 400, marketed as the Cessna TTx, is a single-engine, fixed-gear, low-wing general aviation aircraft built from composite materials by Cessna Aircraft. The Cessna 400 was originally built by Columbia Aircraft as the Columbia 400 until December 2007.Collins, Richard: "Lancair Columbia", ''Flying'', September 2005, pages 46–52. Hachette Filipacchi Media US Inc. ISSN 0015-4806 From 2013, the aircraft was built as the Cessna TTx Model T240. Cessna 400 production was ended in February 2018. Design and development The Cessna 400 was derived from the normally aspirated Columbia 300, which in turn was derived from the Lancair ES kit aircraft. The 400 is powered by a turbocharged Continental TSIO-550-C engine producing at 2600 rpm. The 400 features a Garmin G1000 glass cockpit that was later incorporated into the 300 to create the Cessna 350. The 400's Continental TSIO-550-C engine is capable of being operated lean of peak. Measured in flight at , rich of peak turb ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Ballistic Recovery Systems
Ballistic Recovery Systems, Inc., doing business as BRS Aerospace (and commonly referred to as simply BRS), is a manufacturer of aircraft ballistic parachutes. The company was formed in 1980 by Boris Popov of Saint Paul, Minnesota, after he survived a fall in a partially collapsed hang glider in 1975. As a result, Popov invented a parachute system that could lower an entire light aircraft to the ground in the event of loss of control, failure of the aircraft structure, or other in-flight emergencies. Popov was granted a U.S. patent on 26 August 1986 for the so-called Ballistic Recovery System (BRS) - patent US 4607814 A. The company has two divisions: BRS Aviation and BRS Defense. History BRS was founded in 1980 and introduced its first parachute model two years later in 1982, with focus on the ultralight aircraft market. The company recorded its first successful aircraft and crew recovery in 1983: Jay Tipton of Colorado. In 1998, BRS collaborated with Cirrus Design (now ca ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Four-stroke
A four-stroke (also four-cycle) engine is an internal combustion (IC) engine in which the piston completes four separate strokes while turning the crankshaft. A stroke refers to the full travel of the piston along the cylinder, in either direction. The four separate strokes are termed: #Intake: Also known as induction or suction. This stroke of the piston begins at top dead center (T.D.C.) and ends at bottom dead center (B.D.C.). In this stroke the intake valve must be in the open position while the piston pulls an air-fuel mixture into the cylinder by producing vacuum pressure into the cylinder through its downward motion. The piston is moving down as air is being sucked in by the downward motion against the piston. #Compression: This stroke begins at B.D.C, or just at the end of the suction stroke, and ends at T.D.C. In this stroke the piston compresses the air-fuel mixture in preparation for ignition during the power stroke (below). Both the intake and exhaust valves are close ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Continental TSIO-550
The Continental IO-550 engine is a large family of 9 liter fuel injected six-cylinder, horizontally opposed, air-cooled aircraft engines that were developed for use in light aircraft by Teledyne Continental Motors. The first IO-550 was delivered in 1983 and the type remains in production. The IOF-550 is an Aerosance FADEC equipped version of the same basic engine, the TSIO-550 is a dual turbocharged version and the TSIOL-550 is a liquid-cooled variant. There is no O-550 engine, which would be a carburetor-equipped variant, hence the base model is the IO-550. This engine family competes with the Lycoming IO-580 series which are also six-cylinder engines with similar power output and weight. Design and development The IO-550 family of engines was developed from the IO-520 series, with the stroke increased from 4.00 to 4.25 inches, increasing the displacement to 552 in³ (9.05 L). The engine family covers a power range from to . The engines were first developed in the early ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Lycoming TIO-540
The Lycoming O-540 is a family of air-cooled six-cylinder, horizontally opposed fixed-wing aircraft and helicopter engines of displacement, manufactured by Lycoming Engines. The engine is a six-cylinder version of the four-cylinder Lycoming O-360. Design and development Producing between these engines are installed in a large variety of aircraft. The main competitors are the Continental IO-520 and IO-550 series. An AEIO version was developed for high-performance competition aerobatics aircraft. Starting at the power was eventually increased to . The AEIO-540 family has achieved considerable success in aircraft such as the Extra 300, CAP 232, and Zivko Edge 540. Variants All engines have an additional prefix preceding the 540 to indicate the specific configuration of the engine. The numerous engine suffixes denote different accessories such as different manufacturers' carburetors, or different magnetos. ;O-540 :Standard, direct-drive, normally aspirated Opposed engine, e ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
