Holden Red Motor
   HOME
*





Holden Red Motor
The Holden straight-six motor is a series of straight-six engine that were produced by General Motors Holden at their Port Melbourne plant between 1948 and 1986. The initial ''Grey'' motor was so dubbed because of the colour of the cylinder block, later motors came in the form of a ''Red'', ''Blue'', ''Black'', and the four-cylinder ''Starfire'' engine. These engines were fitted to all Australian designed Holdens of the same years, and the four-cylinder ''Starfire'' notably also found its way into the Toyota Corona (XT130). The ''Grey'' motor is a different engine from the others, while the ''Red'', ''Blue'', ''Black,'' and even the Starfire are all inter-related with many common parts and castings. Grey The ''Grey'' motor, built between 1948 and 1962, earned its name as the engine block was painted grey. This overhead valve engine was first fitted to the Holden 48-215 (and variants) and mated to a three-speed column change gearbox. A three-speed GM ''Roto-Hydramatic 240'' autom ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


picture info

Straight-six Engine
The straight-six engine (also referred to as an inline-six engine; abbreviated I6 or L6) is a piston engine with six cylinders arranged in a straight line along the crankshaft. A straight-six engine has perfect primary and secondary engine balance, resulting in fewer vibrations than other designs of six or less cylinders. Until the mid-20th century, the straight-six layout was the most common design for engines with six cylinders. However, V6 engines became more common from the 1960s and by the 2000s most straight-six engines had been replaced by V6 engines. An exception to this trend is BMW which has produced automotive straight-six engines from 1933 to the present day. Characteristics In terms of packaging, straight-six engines are almost always narrower than a V6 engine or V8 engine, but longer than straight-four engines, V6s, and most V8s. Straight-six engines are typically produced in displacements ranging from , however engines ranging in size from the Benelli 750 ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


Holden EJ
The Holden EJ is a motor vehicle produced by General Motors-Holden's in Australia from 1962 to 1963. Introduced in July 1962,Holden EJ Technical Specifications
Retrieved from www.uniquecarsandparts.com.au on 24 March 2010
the EJ replaced the series.


Overview

The styling of the EJ was a radical departure from that of the EK, with a lower roofline, a flatter boot and an absence of fins. Improvements were made to the brakes, front suspension and the Hydra-matic automatic transmission. A new luxury model, the

picture info

Cast-iron
Cast iron is a class of iron–carbon alloys with a carbon content more than 2%. Its usefulness derives from its relatively low melting temperature. The alloy constituents affect its color when fractured: white cast iron has carbide impurities which allow cracks to pass straight through, grey cast iron has graphite flakes which deflect a passing crack and initiate countless new cracks as the material breaks, and ductile cast iron has spherical graphite "nodules" which stop the crack from further progressing. Carbon (C), ranging from 1.8 to 4 wt%, and silicon (Si), 1–3 wt%, are the main alloying elements of cast iron. Iron alloys with lower carbon content are known as steel. Cast iron tends to be brittle, except for malleable cast irons. With its relatively low melting point, good fluidity, castability, excellent machinability, resistance to deformation and wear resistance, cast irons have become an engineering material with a wide range of applications and are ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


picture info

Forklift
A forklift (also called lift truck, jitney, hi-lo, fork truck, fork hoist, and forklift truck) is a powered industrial truck used to lift and move materials over short distances. The forklift was developed in the early 20th century by various companies, including Clark Material Handling Company, Clark, which made Transmission (mechanics), transmissions, and Yale Materials Handling Corporation, Yale & Towne Manufacturing, which made Hoist (device), hoists. Since World War II, the use and development of the forklift truck have greatly expanded worldwide. Forklifts have become an indispensable piece of equipment in manufacturing and warehousing. In 2013, the top 20 manufacturers worldwide posted sales of $30.4 billion, with 944,405 machines sold. History The middle nineteenth century through the early 20th century saw the developments that led to today's modern forklifts. The forerunners of the modern forklift were manually-powered hoists that were used to lift loads. In 1906, th ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


picture info

Torque
In physics and mechanics, torque is the rotational equivalent of linear force. It is also referred to as the moment of force (also abbreviated to moment). It represents the capability of a force to produce change in the rotational motion of the body. The concept originated with the studies by Archimedes of the usage of levers, which is reflected in his famous quote: "''Give me a lever and a place to stand and I will move the Earth''". Just as a linear force is a push or a pull, a torque can be thought of as a twist to an object around a specific axis. Torque is defined as the product of the magnitude of the perpendicular component of the force and the distance of the line of action of a force from the point around which it is being determined. The law of conservation of energy can also be used to understand torque. The symbol for torque is typically \boldsymbol\tau, the lowercase Greek letter ''tau''. When being referred to as moment of force, it is commonly denoted by . In ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


picture info

Compression Ratio
The compression ratio is the ratio between the volume of the cylinder and combustion chamber in an internal combustion engine at their maximum and minimum values. A fundamental specification for such engines, it is measured two ways: the static compression ratio, calculated based on the relative volumes of the combustion chamber and the cylinder when the piston is at the bottom of its stroke, and the volume of the combustion chamber when the piston is at the top of its stroke. The dynamic compression ratio is a more advanced calculation which also takes into account gasses entering and exiting the cylinder during the compression phase. Effect and typical ratios A high compression ratio is desirable because it allows an engine to extract more mechanical energy from a given mass of air–fuel mixture due to its higher thermal efficiency. This occurs because internal combustion engines are heat engines, and higher compression ratios permit the same combustion temperature to ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


picture info

Ford Of Britain
Ford of Britain (officially Ford Motor Company Limited)The Ford 'companies' or corporate entities referred to in this article are: * Ford Motor Company, Dearborn, Michigan, USA, incorporated 16 June 1903 * Ford Motor Company Limited, incorporated 7 December 1928. Current (May 2010) registered office at Eagle Way, Brentwood, Essex, CM13 3BW, manufacturer and seller of motor vehicles and parts * Ford Motor Company (England) Limited, incorporated in 1909, ''purchased by Ford Motor Company Limited December 1928'' * Henry Ford and Son, Dearborn, Michigan, November 1915, incorporated 8 October 1917 * Henry Ford and Son Limited, Cork incorporated 17 April 1917, ''purchased by Ford Motor Company Limited December'' 1928 Holding company for Ford's European and Egyptian businesses and in addition Lincoln Cars Limited, London, and Henry Ford and Son, Cork: * Société d'Investissements Ford, Luxembourg, was liquidated during 1939 and its assets transferred to: * Ford Investment Company Lim ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


picture info

Vauxhall Motors
Vauxhall Motors LimitedCompany No. 00135767. Incorporated 12 May 1914, name changed from Vauxhall Motors Limited to General Motors UK Limited on 16 April 2008, reverted to Vauxhall Motors Limited on 18 September 2017. () is a British car company headquartered in Chalton, England. Vauxhall became a subsidiary of Stellantis in January 2021. Vauxhall is one of the oldest established vehicle manufacturers and distribution companies in the United Kingdom. It sells passenger cars, electric and light commercial vehicles under the Vauxhall marque, and used to sell vans, buses, and trucks under the Bedford Vehicles brand. Vauxhall was founded by Alexander Wilson in 1857 as a pump and marine engine manufacturer. It was purchased by Andrew Betts Brown in 1863, who began producing travelling cranes under the company, renaming it "Vauxhall Iron Works". The company began manufacturing cars in 1903, and changed its name back around this time. It was acquired by American automaker General Mo ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


picture info

Morris Motors
Morris Motors Limited was a British privately owned motor vehicle manufacturing company formed in 1919 to take over the assets of William Morris's WRM Motors Limited and continue production of the same vehicles. By 1926 its production represented 42 per cent of British car manufacture—a remarkable expansion rate attributed to William Morris's practice of buying in major as well as minor components and assembling them in his own factory. Self-financing through his enormous profits Morris did borrow some money from the public in 1926 and later shared some of Morris Motors' ownership with the public in 1936 when the new capital was used by Morris Motors to buy many of his other privately held businesses. Though it merged... although nearly twenty-five years had elapsed since the BMC merger, not even Austin and Morris, the two volume car manufacturers that formed the core of the original merger, had integrated to a significant degree. Stokes illustrated the immensity of the probl ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


picture info

Austin Motor Company
The Austin Motor Company Limited was an English manufacturer of motor vehicles, founded in 1905 by Herbert Austin in Longbridge. In 1952 it was merged with Morris Motors Limited in the new holding company British Motor Corporation (BMC) Limited, keeping its separate identity. The marque Austin was used until 1987. The trademark is currently owned by the Chinese firm SAIC Motor, after being transferred from bankrupt subsidiary Nanjing Automotive which had acquired it with MG Rover Group in July 2005. History 1905–1918: Formation and development While running the original Wolseley business, which had a highly cyclical sales pattern, Herbert Austin searched for products with a steady demand. Starting in 1895, he built three cars in his free time. They were among Britain's first cars. The third car, a four-wheeler, was completed in 1899. By 1901 his fellow directors could not see future profit in motor vehicles and so with their blessing and the backing of the Vickers bro ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


Holden FB
The Holden FB is an automobile produced by Holden in Australia from 1960 to 1961.Holden FB
Retrieved from www.uniquecarsandparts.com.au on 15 October 2009
Introduced on 14 January 1960,
Retrieved from www.uniquecarsandparts.com.au on 15 October 2009
the FB series replaced the Holden FC range.


Model range

The FB range consisted of four-door in two trim levels, five-door

Holden FC
The Holden FC series is an automobile produced by Holden in Australia from 1958 to 1960. Introduced on 6 May 1958, the FC is a facelifted and improved version of the Holden FE series, which it replaced. Although it is exclusively an Australian design, the styling is reminiscent of a scaled-down North American 1955 Chevrolet. Model range The FC range consisted of four-door sedans in three trim levels, five-door station wagons, marketed as "Station Sedans" in two trim levels, a two-door coupe utility and a three-door panel van. The seven models were:Holden FC sales brochures
Retrieved from The Sixties Holden Archives on 30 April 2009
* Holden Standard Sedan * Holden Standard Station Sedan * Holden Business Sedan * Holden Special Sedan * Holden Special Station Sedan * Holden Utility * Holden Panel Van < ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]