|
Healesville Railway Line
The Healesville railway line, in Melbourne, Australia, was the non-electrified continuation of the suburban Lilydale line, extending into the Yarra Valley. The line closed in the 1980s, but a heritage railway group, the Yarra Valley Railway, is working to retain part of the line between Yarra Glen and Healesville. History The Lilydale railway line was extended to Yarra Flats (now known as Yarra Glen) on 15 May 1888 with intermediate stations at Coldstream and Yering. Part of the structure included a long timber viaduct with 502 openings near Yarra Glen, spanning the Yarra River and the adjacent flood plains. The extension of the line from Yarra Glen to Healesville on 1 March 1889 required a 1 in 40 climb into a 154.4 metre tunnel with a corresponding descent at nearly the same grade. Opened at the same time was the intermediate station of Tarrawarra. Traffic on the line included timber, livestock, milk and dairy products. Early timetables included regular goods services spe ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Yarra Valley Railway
The Yarra Valley Railway is a heritage railway operating on a section of the former Healesville railway which operated between Lilydale and Healesville in the Yarra Valley area northeast of Melbourne, Australia. History The Lilydale-Melbourne railway was extended from Lilydale to Yarra Flats (now known as Yarra Glen) on the 15 May 1888 with intermediate stations at Coldstream and Yering. Part of the structure included a long timber viaduct with 502 openings near Yarra Glen, spanning the Yarra River and the adjacent flood plains. The extension of the line from Yarra Glen to Healesville required a 1 in 40 (2.5%) climb into a 154.4 metre tunnel with a corresponding descent at nearly the same grade. The Healesville Station opened on 1 March 1889 with an intermediate station at Tarrawarra. Traffic on the line included timber, livestock, milk and dairy products. Early timetables included regular goods services specifically for transporting milk. The last regular steam passeng ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Lilydale Railway Station
Lilydale railway station is the terminus of the suburban electrified Lilydale line in Victoria, Australia. It serves the north-eastern Melbourne suburb of Lilydale, and opened on 1 December 1882 as Lillydale.Lilydale Vicsig History Lilydale station opened on 1 December 1882 as an extension of the line from , which had been extended from in April 1882. The fare from Melbourne was 3s 6d ([...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Diesel Electric Railmotor (VR)
The Diesel Electric Rail Motor (DERM) was a railmotor operated by the Victorian Railways of Australia. History Originally built as a petrol electric rail motor (PERM), they were the longest-lived rail motor on the Victorian Railways, with the first entering service in 1928 and the last being withdrawn in 1991. The rail motor was a standard product of the US Electro-Motive Corporation (a predecessor of Electro-Motive Diesel) and built between 1924 and 1932, albeit to a smaller loading gauge and wider track gauge. The first was imported in 1927, assembled at Newport Workshops, and placed in service in 1928. The bodies of the remaining nine were constructed at Newport Workshops using imported equipment and electrical equipment and placed in service between 1930 and 1931. The rail motors were initially powered by a Winton Motor Carriage Company petrol engine, until these wore out and were replaced in the 1950s by twin GM Detroit Diesel Series 71 engines, with a power outpu ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Walker Railmotor
The family of Walker railmotors were a type of diesel railcar operated by the Victorian Railways in Australia. After World War II, the Victorian Railways undertook a major rebuilding program known as Operation Phoenix. One of the first tasks was the upgrading of passenger services on country branch lines, through the replacement of 23 wooden-bodied railmotors built in the 1920s, and the withdrawal of steam locomotive hauled mixed trains. An initial order of twelve railcars, six railcars with trailers, and twelve railcars was placed with Walker Brothers, England. It was then extended to include a further ten railmotors and trailers. The first was delivered in 1948, with additions to the fleet running through to 1955. Construction The power units and controls were shipped out from England and the car bodies were built locally by Martin & King, in the Melbourne suburb of Malvern. Assembly took place at the Newport Workshops. The van bodies were constructed with composi ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Victorian Railways Y Class (diesel)
The Y class are a class of diesel locomotives built by Clyde Engineering, Granville for the Victorian Railways between 1963 and 1968. History In 1963, the first of 25 general purpose diesel-electric locomotives was delivered by Clyde Engineering. As a cost saving measure, they were built with bogies and motors retrieved from scrapped Swing Door electric suburban train sets; the re-use of these components reduced the unit cost of the Y class locomotive from around £52,000 ( $104,000) to £40,000 ($80,000). Two further orders saw the class total 75 by 1968. Although built to dieselise Victoria's shunting operations and replace steam locomotives on branch line services, they were also used on mainline goods and passenger services, including between Spencer Street and Werribee. After closure of branch lines across the state and the end of short pick-up goods trains, use of the class dropped. In the 1980s, it is thought that four Y Class locomotives were on standard gauge, t ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Victorian Railways B Class (diesel)
The B class are a class of diesel locomotives built by Clyde Engineering, Granville for the Victorian Railways in 1952–1953. Ordered and operated by the Victorian Railways, they initiated the dieselisation of the system and saw use on both passenger and freight services, with many remaining in service today, both in preserved and revenue service. Some were rebuilt as the V/Line A class, while others have been scrapped. History The B class were the first mainline diesel locomotives built for the Victorian Railways. The design was based on the successful Electro-Motive Diesel F-unit locomotives with the distinctive bulldog nose. They were unusual in having a streamlined drivers cab at each end. Inception After World War II, the Victorian Railways was run down from years of Depression-era under-investment and wartime over-utilisation. Chief Mechanical Engineer Ahlston traveled the world studying railway rehabilitation. Britain leaned towards steam locomotives, while France ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Victorian Railways T Class (diesel)
The T class are a class of diesel locomotives built by Clyde Engineering, Granville for the Victorian Railways between 1955 and 1968. History In July 1954, the Victorian Railways placed an order with Clyde Engineering for 25 (later extended to 27) diesel electric Electro-Motive Diesel G8 locomotives to partially dieselise country branch lines.1st Order (27 locos): T320-T346 & T413 (1 loco) Mark Bau's VR website In June 1959, the first of an additional ten entered service. Although mechanically similar to the first batch, they differed by having a cab raised above the hood line. Mark Bau's VR website A further ten entered service from Dece ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Victorian Railways D3 Class
Victorian or Victorians may refer to: 19th century * Victorian era, British history during Queen Victoria's 19th-century reign ** Victorian architecture ** Victorian house ** Victorian decorative arts ** Victorian fashion ** Victorian literature ** Victorian morality ** Victoriana Other * ''The Victorians'', a 2009 British documentary * Victorian, a resident of the state of Victoria, Australia * Victorian, a resident of the provincial capital city of Victoria, British Columbia, Canada * RMS Victorian, RMS ''Victorian'', a ship * Saint Victorian (other), various saints * Victorian (horse) * Victorian Football Club (other), either of two defunct Australian rules football clubs See also * Neo-Victorian, a late 20th century aesthetic movement * Queen Victoria * Victoria (other) * The Victorians (other), ''The Victorians'' (other) * * {{disambiguation ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Victorian Railways K Class
The K class was a branch line steam locomotive that ran on Victorian Railways in Australia from 1922 to 1979. Although its design was entirely conventional and its specifications unremarkable, the K class was in practice a remarkably versatile and dependable locomotive. It went on to outlast every other class of steam locomotive in regular service on the VR, and no fewer than 21 examples of the 53 originally built have survived into preservation. History The K class was the first design from the VR Locomotive Design Section under the stewardship of Alfred E Smith as Chief Mechanical Engineer. The Locomotive Design Section had introduced successful mainline and branchline passenger locomotives with the A2 class and Dd class 4-6-0s, and had recently improved mainline goods services with the C class 2-8-0. They now turned their attention to a requirement for a more powerful branchline goods locomotive, and in 1922 produced a lighter 2-8-0 "Consolidation" locomotive with a a ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Victorian Railways J Class (1954)
The Victorian Railways J class was a branch line steam locomotive operated by the Victorian Railways (VR) between 1954 and 1972. A development of the successful Victorian Railways K class 2-8-0, it was the last new class of steam locomotive introduced on the VR. Introduced almost concurrently with the diesel-electric locomotives that ultimately superseded them, the locomotives were only in service for a relatively short time. History During the early 1950s, the Victorian Railways (VR) embarked on a massive upgrading of its ageing locomotive fleet as part of Operation Phoenix, an £80 million program to rebuild a network badly run down by years of underinvestment during the Great Depression, and the heavy workload imposed by World War II. Victoria's branch line railway network, laid with rail and featuring gradients of up to 1 in 30 (3.33 %), was still largely served by the D1, D2 and D3 variants of the once 261-strong 1902-era Dd class 4-6-0 which, by the early 1950s, wer ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Victorian Railways A2 Class
The A2 class was an express passenger locomotive that ran on Victorian Railways from 1907 to 1963. A highly successful design entirely the work of Victorian Railways' own design office, its long service life was repeatedly extended as the Great Depression and later World War II delayed the introduction of more modern and powerful replacement locomotives. History The introduction of the A2 class marked a turning point in Victorian Railways locomotive design, as it was entirely designed by VR engineers of the newly established Locomotive Design Section and the entire class built in-house at Victorian Railways workshops.Pearce et al., p. 12 Production Based on the success of the prototype A2572, a total of 125 Stephenson valve gear A2 locomotives were built between 1907 and 1915. The design was then altered to incorporate larger diameter cylinders, a higher pressure boiler and Walschaerts valve gear, and a further 60 locomotives of that design were produced between 1915 and 1922. ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
153hp Walker Railmotor
The family of Walker railmotors were a type of diesel railcar operated by the Victorian Railways in Australia. After World War II, the Victorian Railways undertook a major rebuilding program known as Operation Phoenix. One of the first tasks was the upgrading of passenger services on country branch lines, through the replacement of 23 wooden-bodied railmotors built in the 1920s, and the withdrawal of steam locomotive hauled mixed trains. An initial order of twelve railcars, six railcars with trailers, and twelve railcars was placed with Walker Brothers, England. It was then extended to include a further ten railmotors and trailers. The first was delivered in 1948, with additions to the fleet running through to 1955. Construction The power units and controls were shipped out from England and the car bodies were built locally by Martin & King, in the Melbourne suburb of Malvern. Assembly took place at the Newport Workshops. The van bodies were constructed with composi ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
