|
Foot–pound–second System
The foot–pound–second system or FPS system is a system of units built on three fundamental units: the foot for length, the (avoirdupois) pound for either mass or force (see below), and the second for time.. Variants Collectively, the variants of the FPS system were the most common system in technical publications in English until the middle of the 20th century. Errors can be avoided and translation between the systems facilitated by labelling all physical quantities consistently with their units. Especially in the context of the FPS system this is sometimes known as the Stroud system after William Stroud, who popularized it. Pound as mass unit When the pound is used as a unit of mass, the core of the coherent system is similar and functionally equivalent to the corresponding subsets of the International System of Units (SI), using metre, kilogram and second (MKS), and the earlier centimetre–gram–second system of units (CGS). This system is often called the Absolut ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Foot (unit)
The foot ( feet), standard symbol: ft, is a unit of length in the British imperial and United States customary systems of measurement. The prime symbol, , is a customarily used alternative symbol. Since the International Yard and Pound Agreement of 1959, one foot is defined as 0.3048 meters exactly. In both customary and imperial units, one foot comprises 12 inches and one yard comprises three feet. Historically the "foot" was a part of many local systems of units, including the Greek, Roman, Chinese, French, and English systems. It varied in length from country to country, from city to city, and sometimes from trade to trade. Its length was usually between 250 mm and 335 mm and was generally, but not always, subdivided into 12 inches or 16 digits. The United States is the only industrialized nation that uses the international foot and the survey foot (a customary unit of length) in preference to the meter in its commercial, engin ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Dyne
The dyne (symbol: dyn; ) is a derived unit of force specified in the centimetre–gram–second (CGS) system of units, a predecessor of the modern SI. History The name dyne was first proposed as a CGS unit of force in 1873 by a Committee of the British Association for the Advancement of Science. Definition The dyne is defined as "the force required to accelerate a mass of one gram at a rate of one centimetre per second squared". An equivalent definition of the dyne is "that force which, acting for one second, will produce a change of velocity of one centimetre per second in a mass of one gram". One dyne is equal to 10 micronewtons, 10−5 N or to 10 nsn (nano sthenes) in the old metre–tonne–second system of units. : 1 dyn = 1 g⋅cm/s2 = 10−5 kg⋅m/s2 = 10−5 N : 1 N = 1 kg⋅m/s2 = 105 g⋅cm/s2 = 105 dyn Use The dyne per centimetre is a unit traditionally used to measure surface tension. For example, the surface tension of distilled water is 71.99 dyn/c ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Systems Of Units
A system of measurement is a collection of units of measurement and rules relating them to each other. Systems of measurement have historically been important, regulated and defined for the purposes of science and commerce. Systems of measurement in use include the International System of Units or (the modern form of the metric system), the British imperial system, and the United States customary system. History The French Revolution gave rise to the metric system, and this has spread around the world, replacing most customary units of measure. In most systems, length (distance), mass, and time are ''base quantities''. Later science developments showed that an electromagnetic quantity such as electric charge or electric current could be added to extend the set of base quantities. Gaussian units have only length, mass, and time as base quantities, with no separate electromagnetic dimension. Other quantities, such as power and speed, are derived from the base set: for example, ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Metre–tonne–second System Of Units
The metre–tonne–second or MTS system of units is a system of physical units. It was invented in France, hence the unit names ''sthène'' and ''pièze'', and became its legal system between 1919 and 1961 ("décret" 5 May 1961, "Journal Officiel"). It was adopted by the Soviet Union in 1933 and abolished there in 1955. It was a metric and coherent system of units, much as SI and the centimetre–gram–second system (CGS), but with larger units for industrial use, whereas the CGS system was regarded as suitable for laboratory use only. Units The base units of the MTS system are: * Length: metre * Mass: tonne, *: 1 t = 103 kg = 1 Mg * Time: second Some common derived units: * Volume: cubic metre or stere *: 1 m3 ≡ 1 st * Force: sthène, *: 1 sn = 1 t⋅m/s2 = 103 N = 1 kN * Energy: sthène-metre = kilojoule, *: 1 sn⋅m = 1 t⋅m2/s2 = 103 J = 1 kJ * Power: sthène-metre per second = kilowatt, *: 1 sn⋅m/s = 1 t⋅m2/s3 = 103 W = 1 kW * Pressure: pièze, *: ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Standard Gravity
The standard acceleration due to gravity (or standard acceleration of free fall), sometimes abbreviated as standard gravity, usually denoted by or , is the nominal gravitational acceleration of an object in a vacuum near the surface of the Earth. It is defined by standard as . This value was established by the 3rd CGPM (1901, CR 70) and used to define the standard weight of an object as the product of its mass and this nominal acceleration. The acceleration of a body near the surface of the Earth is due to the combined effects of gravity and centrifugal acceleration from the rotation of the Earth (but the latter is small enough to be negligible for most purposes); the total (the apparent gravity) is about 0.5% greater at the poles than at the Equator. Although the symbol is sometimes used for standard gravity, (without a suffix) can also mean the local acceleration due to local gravity and centrifugal acceleration, which varies depending on one's position on Earth (see Earth's ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Weighing Scale
A scale or balance is a device used to measure weight or mass. These are also known as mass scales, weight scales, mass balances, and weight balances. The traditional scale consists of two plates or bowls suspended at equal distances from a fulcrum. One plate holds an object of unknown mass (or weight), while known masses are added to the other plate until static equilibrium is achieved and the plates level off, which happens when the masses on the two plates are equal. The perfect scale rests at neutral. A spring scale will make use of a spring of known stiffness to determine mass (or weight). Suspending a certain mass will extend the spring by a certain amount depending on the spring's stiffness (or spring constant). The heavier the object, the more the spring stretches, as described in Hooke's law. Other types of scales making use of different physical principles also exist. Some scales can be calibrated to read in units of force (weight) such as newtons instead of unit ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Candela
The candela ( or ; symbol: cd) is the unit of luminous intensity in the International System of Units (SI). It measures luminous power per unit solid angle emitted by a light source in a particular direction. Luminous intensity is analogous to radiant intensity, but instead of simply adding up the contributions of every wavelength of light in the source's spectrum, the contribution of each wavelength is weighted by the standard luminosity function (a model of the sensitivity of the human eye to different wavelengths). A common wax candle emits light with a luminous intensity of roughly one candela. If emission in some directions is blocked by an opaque barrier, the emission would still be approximately one candela in the directions that are not obscured. The word ''candela'' is Latin for ''candle''. The old name "candle" is still sometimes used, as in ''foot-candle'' and the modern definition of ''candlepower''. Definition The 26th General Conference on Weights and Measures (C ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
English Engineering Units
Some fields of engineering in the United States use a system of measurement of physical quantities known as the English Engineering Units. Despite its name, the system is based on United States customary units of measure; it is not used in England. A similar system, termed British Engineering Units by Halliday and Resnick (1974), was a system that used the slug as the unit of mass, and in which Newton's law retains the form ''F=ma''. Modern British engineering practice has used SI base units since at least the late 1970s. Definition The English Engineering Units is a system of consistent units used in the United States. The set is defined by the following units, with a comparison of their definitive conversions to their International System of Units counterparts. Units for other physical quantities are derived from this set as needed. In English Engineering Units, the pound-mass and the pound-force are distinct base units, and Newton's Second Law of Motion takes the f ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Slug (unit)
The slug is a derived unit of mass in a weight-based system of measures, most notably within the British Imperial measurement system and the United States customary measures system. Systems of measure either define mass and derive a force unit ''or'' define a base force and derive a mass unit (cf. ''poundal'', a derived unit of force in a force-based system). A slug is defined as the mass that is accelerated by 1 ft/s2 when a net force of one pound (lbf) is exerted on it. : 1~\text = 1~\text\frac \quad\Longleftrightarrow\quad 1~\text = 1~\text\frac One slug is a mass equal to based on standard gravity, the international foot, and the avoirdupois pound.Shigley, Joseph E. and Mischke, Charles R. ''Mechanical Engineering Design'', Sixth ed, pp. 31–33. McGraw Hill, 2001. . At the Earth's surface, an object with a mass of 1 slug weighs approximately .Shevell, R.S. ''Fundamentals of Flight'', Second ed, p. xix. Prentice-Hall, 1989. History The ''slug'' is part of a ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Pound-force
The pound of force or pound-force (symbol: lbf, sometimes lbf,) is a unit of force used in some systems of measurement, including English Engineering units and the foot–pound–second system. Pound-force should not be confused with pound-mass (lb), often simply called ''pound'', which is a unit of mass, nor should these be confused with foot-pound (ft⋅lbf), a unit of energy, or pound-foot (lbf⋅ft), a unit of torque. Definitions The pound-force is equal to the gravitational force exerted on a mass of one avoirdupois pound on the surface of Earth. Since the 18th century, the unit has been used in low-precision measurements, for which small changes in Earth's gravity (which varies from equator to pole by up to half a percent) can safely be neglected. The 20th century, however, brought the need for a more precise definition, requiring a standardized value for acceleration due to gravity. Product of avoirdupois pound and standard gravity The pound-force is the product ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
