|
Foam Glass Gravel
Foam glass gravel is a building material made from recycled glass. Characteristics Foam glass gravel is light and dimensionally stable, with a lambda rating of 0.08 W/mK and a specific weight of 150 kg per cubic metre. Being made from glass, the aggregate is non-combustive and inert, ageing resistant, pH neutral and insect and rodent resistant. The manufacturing process seals the air bubbles giving the gravel non-capillary properties. The material has a high compressive strength as well as insulatory properties making it ideal for insulated floor construction Sourcing and manufacture Glass shards are cleaned and milled to a powder before a foaming agent, active carbon, is added in either liquid or solid form. The material is passed through a continuous tunnel furnace and heated to a temperature of 800–900 °C. Optimum temperatures produce maximum quantities of the foamed product. The foamed molten glass breaks into gravel on cooling. Uses Foam glass gravel ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Building Material
Building material is material used for construction. Many naturally occurring substances, such as clay, rock (geology), rocks, sand, wood, and even twigs and leaves, have been used to construct buildings. Apart from naturally occurring materials, many man-made products are in use, some more and some less synthetic. The manufacturing of building materials is an established industry in many countries and the use of these materials is typically segmented into specific specialty trades, such as carpentry, Building insulation, insulation, plumbing, and roofing material, roofing work. They provide the make-up of :Human habitats, habitats and architecture, structures including homes. The total cost of building materials In history, there are trends in building materials from being natural to becoming more man-made and Composite material, composite; biodegradable to imperishable; indigenous (local) to being transported globally; repairable to disposable; chosen for increased levels of ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Glass Recycling
Glass recycling is the processing of waste glass into usable products. Glass that is crushed or imploded and ready to be remelted is called cullet. There are two types of cullet: internal and external. Internal cullet is composed of defective products detected and rejected by a quality control process during the industrial process of glass manufacturing, transition phases of product changes (such as thickness and color changes) and production offcuts. External cullet is waste glass that has been collected or reprocessed with the purpose of recycling. External cullet (which can be pre- or post-consumer) is classified as waste. The word "cullet", when used in the context of end-of-waste, will always refer to external cullet. To be recycled, glass waste needs to be purified and cleaned of contamination. Then, depending on the end use and local processing capabilities, it might also have to be separated into different sizes and colours. Many recyclers collect different colors of gl ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
R-value (insulation)
In the context of construction, the R-value is a measure of how well a two-dimensional barrier, such as a layer of insulation, a window or a complete wall or ceiling, resists the conductive flow of heat. R-value is the temperature difference per unit of heat flux needed to sustain one unit of heat flux between the warmer surface and colder surface of a barrier under steady-state conditions. The ''R-value'' is the building industry term for thermal resistance "per unit area." It is sometimes denoted RSI-value if the SI units are used. An R-value can be given for a material (e.g. for polyethylene foam), or for an assembly of materials (e.g. a wall or a window). In the case of materials, it is often expressed in terms of R-value per metre. R-values are additive for layers of materials, and the higher the R-value the better the performance. The U-factor or U-value is the overall heat transfer coefficient and can be found by taking the inverse of the R-value. It is a property ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Specific Weight
The specific weight, also known as the unit weight, is the weight per unit volume of a material. A commonly used value is the specific weight of water on Earth at , which is .National Council of Examiners for Engineering and Surveying (2005). ''Fundamentals of Engineering Supplied-Reference Handbook'' (7th ed.). . Often a source of confusion is that the terms ''specific gravity'', and less often ''specific weight'', are also used for relative density. A common symbol for specific weight is , the Greek letter Gamma. Definition The specific weight, , of a material is defined as the product of its density, , and the standard gravity, : \gamma = \rho \, g The density of the material is defined as mass per unit volume, typically measured in kg/m3. The standard gravity is acceleration due to gravity, usually given in m/s2, and on Earth usually taken as . Unlike density, specific weight is not a fixed property of a material. It depends on the value of the gravitational acceleration, ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Compressive Strength
In mechanics, compressive strength or compression strength is the capacity of a material or structure to withstand loads tending to reduce size (as opposed to tensile strength which withstands loads tending to elongate). In other words, compressive strength resists compression (being pushed together), whereas tensile strength resists tension (being pulled apart). In the study of strength of materials, tensile strength, compressive strength, and shear strength can be analyzed independently. Some materials fracture at their compressive strength limit; others deform irreversibly, so a given amount of deformation may be considered as the limit for compressive load. Compressive strength is a key value for design of structures. Compressive strength is often measured on a universal testing machine. Measurements of compressive strength are affected by the specific test method and conditions of measurement. Compressive strengths are usually reported in relationship to a specific tec ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Active Carbon
Activated carbon, also called activated charcoal, is a form of carbon commonly used to filter contaminants from water and air, among many other uses. It is processed (activated) to have small, low-volume pores that increase the surface area available for adsorption (which is not the same as absorption) or chemical reactions. Activation is analogous to making popcorn from dried corn kernels: popcorn is light, fluffy, and has a surface area that is much larger than the kernels. ''Activated'' is sometimes replaced by ''active''. Due to its high degree of microporosity, one gram of activated carbon has a surface area in excess of as determined by gas adsorption. Charcoal, before activation, has a specific surface area in the range of . An activation level sufficient for useful application may be obtained solely from high surface area. Further chemical treatment often enhances adsorption properties. Activated carbon is usually derived from waste products such as coconut husks; wast ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Friction Angle
Friction is the force resisting the relative motion of solid surfaces, fluid layers, and material elements sliding (motion), sliding against each other. There are several types of friction: *Dry friction is a force that opposes the relative lateral motion of two solid surfaces in contact. Dry friction is subdivided into ''static friction'' ("stiction") between non-moving surfaces, and ''kinetic friction'' between moving surfaces. With the exception of atomic or molecular friction, dry friction generally arises from the interaction of surface features, known as Asperity (materials science), asperities (see Figure 1). *Fluid friction describes the friction between layers of a viscous fluid that are moving relative to each other. *Lubricated friction is a case of fluid friction where a lubricant fluid separates two solid surfaces. *Skin friction is a component of Drag (physics), drag, the force resisting the motion of a fluid across the surface of a body. *Internal friction is t ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Permafrost
Permafrost is ground that continuously remains below 0 °C (32 °F) for two or more years, located on land or under the ocean. Most common in the Northern Hemisphere, around 15% of the Northern Hemisphere or 11% of the global surface is underlain by permafrost, with the total area of around 18 million km2. This includes substantial areas of Alaska, Greenland, Canada and Siberia. It can also be located on mountaintops in the Southern Hemisphere and beneath ice-free areas in the Antarctic. Permafrost does not have to be the first layer that is on the ground. It can be from an inch to several miles deep under the Earth's surface. It frequently occurs in ground ice, but it can also be present in non-porous bedrock. Permafrost is formed from ice holding various types of soil, sand, and rock in combination. Permafrost contains large amounts of biomass and decomposed biomass that has been stored as methane and carbon dioxide, making tundra soil a carbon sink. As global war ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
2023 Interstate 95 Highway Collapse
On June 11, 2023, a tanker truck carrying gasoline caught fire beneath the overpass that carries Interstate 95 (I-95) at the Pennsylvania Route 73 (PA 73, Cottman Avenue) interchange in the Tacony neighborhood of Northeast Philadelphia. The extreme heat caused the northbound lanes to collapse and damaged the southbound lanes, closing roughly of both directions of I-95, between the Betsy Ross Bridge/Aramingo Avenue (exit 26) and PA 63/Woodhaven Road (exit 35). The swift construction of a temporary roadway enabled traffic to resume on June 23, less than two weeks after the fire. The incident recalled the 2007 collapse of a connector in the MacArthur Maze in Oakland, California, and the 2017 collapse of an I-85 overpass in Atlanta, Georgia. Background The area affected by the crash carried about 160,000 vehicles daily and the highway span was about 10 to 12 years old and had appeared structurally sound. It had also been part of a $212 mill ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Aggregate (composite)
Aggregate is the component of a composite material that resists compressive stress and provides bulk to the composite material. For efficient filling, aggregate should be much smaller than the finished item, but have a wide variety of sizes. For example, the particles of stone used to make concrete typically include both sand and gravel. Comparison to fiber composites ''Aggregate composites'' tend to be much easier to fabricate, and much more predictable in their finished properties, than '' fiber composites''. Fiber orientation and continuity can have an overwhelming effect, but can be difficult to control and assess. Fabrication aside, aggregate materials themselves also tend to be less expensive; the most common aggregates mentioned above are found in nature and can often be used with only minimal processing. Not all composite materials include aggregate. Aggregate particles tend to have about the same dimensions in every direction (that is, an aspect ratio of about one), so ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Glass Applications
Glass is a non-Crystallinity, crystalline, often transparency and translucency, transparent, amorphous solid that has widespread practical, technological, and decorative use in, for example, window panes, tableware, and optics. Glass is most often formed by rapid cooling (quenching) of the Melting, molten form; some glasses such as volcanic glass are naturally occurring. The most familiar, and historically the oldest, types of manufactured glass are "silicate glasses" based on the chemical compound silicon dioxide, silica (silicon dioxide, or quartz), the primary constituent of sand. Soda–lime glass, containing around 70% silica, accounts for around 90% of manufactured glass. The term ''glass'', in popular usage, is often used to refer only to this type of material, although silica-free glasses often have desirable properties for applications in modern communications technology. Some objects, such as drinking glasses and glasses, eyeglasses, are so commonly made of silicate- ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
