|
Emirates Flight 521
Emirates Flight 521 was a scheduled international passenger flight from Thiruvananthapuram, India, to Dubai, United Arab Emirates, operated by Emirates using a Boeing 777-300. On 3 August 2016, the aircraft carrying 282 passengers and 18 crew crashed while landing at Dubai International Airport. All 300 people on board survived the accident; 32 were injured, four were seriously injured. An airport firefighter died during the rescue operation, and another seven firefighters were injured. The accident is the only hull loss of an Emirates aircraft. Aircraft and crew The aircraft involved was a Boeing 777-31HThe aircraft was a Boeing 777-300 model; Boeing assigns a unique code for each company that buys one of its aircraft, which is applied as an infix to the model number at the time the aircraft is built, hence "777-31H". with the registration A6-EMW, serial number 32700, and line number 434. It was equipped with two Rolls-Royce Trent 892 engines and was 13 years old, having made ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Go-around
In aviation, a go-around is an aborted landing of an aircraft that is on final approach or has already touched down. A go-around can either be initiated by the pilot flying or requested by air traffic control for various reasons, such as an unstabilized approach or an obstruction on the runway. Etymology The term arises from the traditional use of traffic patterns at airfields. A landing aircraft will first join the traffic pattern/circuit and prepare for landing. If for some reason, the pilot decides not to land, the pilot can simply fly back up to traffic pattern altitude/circuit height, and complete another circuit. The term "go-around" is still used even for modern airliners, though they may not use traditional traffic patterns/circuits for landing. Reasons for use Initiation of a go-around may be either ordered by air traffic control (normally the local or tower controller in a controlled field) or initiated by the pilot in command of the aircraft. In naval aviation, t ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Coordinated Universal Time
Coordinated Universal Time or UTC is the primary time standard by which the world regulates clocks and time. It is within about one second of mean solar time (such as UT1) at 0° longitude (at the IERS Reference Meridian as the currently used prime meridian) and is not adjusted for daylight saving time. It is effectively a successor to Greenwich Mean Time (GMT). The coordination of time and frequency transmissions around the world began on 1 January 1960. UTC was first officially adopted as CCIR Recommendation 374, ''Standard-Frequency and Time-Signal Emissions'', in 1963, but the official abbreviation of UTC and the official English name of Coordinated Universal Time (along with the French equivalent) were not adopted until 1967. The system has been adjusted several times, including a brief period during which the time-coordination radio signals broadcast both UTC and "Stepped Atomic Time (SAT)" before a new UTC was adopted in 1970 and implemented in 1972. This change also a ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Indicated Airspeed
Indicated airspeed (IAS) is the airspeed of an aircraft as measured by its pitot-static system and displayed by the airspeed indicator (ASI). This is the pilots' primary airspeed reference. This value is not corrected for installation error, instrument error, or the actual encountered air density, being instead calibrated to always reflect the adiabatic compressible flow of the International Standard Atmosphere at sea level. It uses the difference between total pressure and static pressure, provided by the system, to either mechanically or electronically measure dynamic pressure. The dynamic pressure includes terms for both density and airspeed. Since the airspeed indicator cannot know the density, it is by design calibrated to assume the sea level standard atmospheric density when calculating airspeed. Since the actual density will vary considerably from this assumed value as the aircraft changes altitude, IAS varies considerably from true airspeed (TAS), the relative velocity ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Throttle
A throttle is the mechanism by which fluid flow is managed by constriction or obstruction. An engine's power can be increased or decreased by the restriction of inlet gases (by the use of a throttle), but usually decreased. The term ''throttle'' has come to refer, informally, to any mechanism by which the power or speed of an engine is regulated, such as a car's accelerator pedal. What is often termed a ''throttle'' (in an aviation context) is also called a thrust lever, particularly for jet engine powered aircraft. For a steam locomotive, the valve which controls the steam is known as the regulator. Internal combustion engines In an internal combustion engine, the throttle is a means of controlling an engine's power by regulating the amount of fuel or air entering the engine. In a motor vehicle the control used by the driver to regulate power is sometimes called the throttle, accelerator, or gas Automobile pedal, pedal. For a gasoline engine, the throttle most commonly regul ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Undercarriage (aeronautics)
Landing gear is the undercarriage of an aircraft or spacecraft that is used for takeoff or landing. For aircraft it is generally needed for both. It was also formerly called ''alighting gear'' by some manufacturers, such as the Glenn L. Martin Company. For aircraft, Stinton makes the terminology distinction ''undercarriage (British) = landing gear (US)''. For aircraft, the landing gear supports the craft when it is not flying, allowing it to take off, land, and taxi without damage. Wheeled landing gear is the most common, with skis or floats needed to operate from snow/ice/water and skids for vertical operation on land. Faster aircraft have retractable undercarriages, which fold away during flight to reduce drag. Some unusual landing gear have been evaluated experimentally. These include: no landing gear (to save weight), made possible by operating from a catapult cradle and flexible landing deck: air cushion (to enable operation over a wide range of ground obstacles and wat ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Flap (aeronautics)
A flap is a high-lift device used to reduce the stall (flight), stalling speed of an aircraft wing at a given weight. Flaps are usually mounted on the wing trailing edges of a fixed-wing aircraft. Flaps are used to reduce the take-off distance and the landing distance. Flaps also cause an increase in Drag (physics), drag so they are retracted when not needed. The flaps installed on most aircraft are partial-span flaps; spanwise from near the wing root to the inboard end of the ailerons. When partial-span flaps are extended they alter the spanwise lift distribution on the wing by causing the inboard half of the wing to supply an increased proportion of the lift, and the outboard half to supply a reduced proportion of the lift. Reducing the proportion of the lift supplied by the outboard half of the wing is accompanied by a reduction in the angle of attack on the outboard half. This is beneficial because it increases the margin above the Stall (fluid dynamics), stall of the outboa ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Runway Awareness And Advisory System
The Runway Awareness and Advisory System (RAAS) is an electronic detection system manufactured by Honeywell Aerospace, that notifies aircraft flight crews on the ground of their position relative to their allocated runway. Overview According to Honeywell, who developed RAAS, runway incursions are a leading cause of aviation accidents and fatalities, costing approximately $1 billion annually. RAAS functions by providing audible alerts to confirm runway identification, and also provides an aural alarm if it detects undue acceleration (indicating an attempt to take off) while the aircraft is on any taxiway instead of a designated runway. Its function is possible by a software enhancement to the aircraft's terrain awareness and warning system (TAWS) or enhanced ground proximity warning system (EGPWS). Entrance into service Alaska Airlines announced in September 2008 that its entire airline fleet of Boeing 737s will be equipped with RAAS by the end of September. That will be the f ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Runway
According to the International Civil Aviation Organization (ICAO), a runway is a "defined rectangular area on a land aerodrome prepared for the landing and takeoff of aircraft". Runways may be a man-made surface (often asphalt concrete, asphalt, concrete, or a mixture of both) or a natural surface (sod, grass, soil, dirt, gravel, ice, sand or road salt, salt). Runways, as well as taxiways and Airport apron, ramps, are sometimes referred to as "tarmac", though very few runways are built using Tarmacadam, tarmac. Takeoff and landing areas defined on the surface of water for seaplanes are generally referred to as waterways. Runway lengths are now International Civil Aviation Organization#Use of the International System of Units, commonly given in meters worldwide, except in North America where feet are commonly used. History In 1916, in a World War I war effort context, the first concrete-paved runway was built in Clermont-Ferrand in France, allowing local company Michelin to ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Final Approach (aeronautics)
In aeronautics, the final approach (also called the final leg and final approach leg) is the last leg in an aircraft's approach to landing, when the aircraft is lined up with the runway and descending for landing.Crane, Dale: ''Dictionary of Aeronautical Terms, third edition'', page 213 and 241. Aviation Supplies & Academics, 1997. In aviation radio terminology, it is often shortened to "final". In a standard airport landing pattern, which is usually used under visual meteorological conditions (VMC), aircraft turn from base leg to final within one-half to two miles of the airport. For instrument approaches, as well as approaches into a controlled airfield under visual flight rules (VFR), often a "straight-in" final approach is used, where all the other legs are dispensed with. Straight-in approaches are discouraged at non-towered airports in the United States. Approach slope An approach slope is the path that an airplane follows on its final approach to land on a runway. I ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Wind Shear
Wind shear (or windshear), sometimes referred to as wind gradient, is a difference in wind speed and/or direction over a relatively short distance in the atmosphere. Atmospheric wind shear is normally described as either vertical or horizontal wind shear. Vertical wind shear is a change in wind speed or direction with a change in altitude. Horizontal wind shear is a change in wind speed with a change in lateral position for a given altitude. Wind shear is a microscale meteorological phenomenon occurring over a very small distance, but it can be associated with mesoscale or synoptic scale weather features such as squall lines and cold fronts. It is commonly observed near microbursts and downbursts caused by thunderstorms, fronts, areas of locally higher low-level winds referred to as low-level jets, near mountains, radiation inversions that occur due to clear skies and calm winds, buildings, wind turbines, and sailboats. Wind shear has significant effects on the control of a ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Flight Safety Foundation
The Flight Safety Foundation (FSF) is an independent, nonprofit, international organization concerning research, education, advocacy, and communications in the field of aviation safety. FSF brings together aviation professionals from all sectors to help solve safety problems facing the industry. With a membership that spreads throughout the world, FSF brings an international perspective to aviation issues for its members, the media, and the traveling public. History Since its founding in 1947, the foundation has acted as a non-profit, independent clearinghouse to disseminate safety information, identify threats to safety, and recommend practical solutions. Today, the foundation provides leadership to more than 1200 members in more than 75 countries. AvCIR The Aviation Crash Injury Research (AvCIR) Division became part of FSF in April 1959, being transferred from Cornell University.''Army Aviation Safety - Crash Injury, Crashworthiness'', AvCIR 70-0-128, Flight Safety Foundation, ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Aviation Safety Network
The Flight Safety Foundation (FSF) is an independent, nonprofit, international organization concerning research, education, advocacy, and communications in the field of aviation safety. FSF brings together aviation professionals from all sectors to help solve safety problems facing the industry. With a membership that spreads throughout the world, FSF brings an international perspective to aviation issues for its members, the media, and the traveling public. History Since its founding in 1947, the foundation has acted as a non-profit, independent clearinghouse to disseminate safety information, identify threats to safety, and recommend practical solutions. Today, the foundation provides leadership to more than 1200 members in more than 75 countries. AvCIR The Aviation Crash Injury Research (AvCIR) Division became part of FSF in April 1959, being transferred from Cornell University.''Army Aviation Safety - Crash Injury, Crashworthiness'', AvCIR 70-0-128, Flight Safety Foundation, ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
