|
Channel-associated Signaling
Channel-associated signaling (CAS), also known as ''per-trunk signaling'' (PTS), is a form of digital communication signaling. As with most telecommunication signaling methods, it uses routing information to direct the payload of voice or data to its destination. With CAS, this routing information is encoded and transmitted in the same channel as the payload itself. This information can be transmitted in the same band ( in-band signaling) or a separate band ( out-of-band signaling) to the payload. Call setup will be comparatively slower since signaling channels are shared thus congestion can be faced. CAS potentially results in lower available bandwidth for the payload. For example, in the PSTN the use of out-of-band signaling within a fixed bandwidth reduces a 64 kbit/s DS0 to 56 kbit/s. Because of this, and the inherent security benefits of separating the control lines from the payload, telephone systems introduced since the 1960s rely more on common-channel signaling (CCS). T ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Signaling (telecommunications)
In telecommunication, signaling is the use of signals for controlling communications. This may constitute an information exchange concerning the establishment and control of a telecommunication circuit and the management of the network. Classification Signaling systems may be classified based on several principal characteristics. In-band and out-of-band signaling In the public switched telephone network (PSTN), in-band signaling is the exchange of call control information within the same physical channel, or within the same frequency band, that the telephone call itself is using. An example is dual-tone multi-frequency signaling (DTMF), which is used on most telephone lines to customer premises. Out-of-band signaling is telecommunication signaling on a dedicated channel separate from that used for the telephone call. Out-of-band signaling has been used since Signaling System No. 6 (SS6) was introduced in the 1970s, and also in Signalling System No. 7 (SS7) in 1980 which becam ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
In-band Signaling
In telecommunications, in-band signaling is the sending of control information within the same band or channel used for data such as voice or video. This is in contrast to out-of-band signaling which is sent over a different channel, or even over a separate network. In-band signals may often be heard by telephony participants, while out-of-band signals are inaccessible to the user. The term is also used more generally, for example of computer data files that include both literal data, and metadata and/or instructions for how to process the literal data. Telephony When dialing from a land-line telephone, the telephone number is encoded and transmitted across the telephone line in form of dual-tone multi-frequency signaling (DTMF). The tones control the telephone system by instructing the telephone switch where to route the call. These control tones are sent over the same channel, the copper wire, and in the frequency range (300 Hz to 3.4 kHz) as the audio of the ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Out-of-band Signaling
In telecommunication, signaling is the use of signals for controlling communications. This may constitute an information exchange concerning the establishment and control of a telecommunication circuit and the management of the network. Classification Signaling systems may be classified based on several principal characteristics. In-band and out-of-band signaling In the public switched telephone network (PSTN), in-band signaling is the exchange of call control information within the same physical channel, or within the same frequency band, that the telephone call itself is using. An example is dual-tone multi-frequency signaling (DTMF), which is used on most telephone lines to customer premises. Out-of-band signaling is telecommunication signaling on a dedicated channel separate from that used for the telephone call. Out-of-band signaling has been used since Signaling System No. 6 (SS6) was introduced in the 1970s, and also in Signalling System No. 7 (SS7) in 1980 which b ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
PSTN
The public switched telephone network (PSTN) provides infrastructure and services for public telecommunication. The PSTN is the aggregate of the world's circuit-switched telephone networks that are operated by national, regional, or local telephony operators. These consist of telephone lines, fiber optic cables, microwave transmission links, cellular networks, communications satellites, and undersea telephone cables, all interconnected by switching centers which allow most telephones to communicate with each other. Originally a network of fixed-line analog telephone systems, the PSTN is now almost entirely digital in its core network and includes mobile and other networks, as well as fixed telephones. The technical operation of the PSTN adheres to the standards created by the ITU-T. These standards allow different networks in different countries to interconnect seamlessly. The E.163 and E.164 standards provide a single global address space for telephone numbers. The combina ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Common-channel Signaling
In telecommunication, common-channel signaling (CCS), or common-channel interoffice signaling (CCIS), is the transmission of control information ''( signaling)'' via a separate channel than that used for the messages, The signaling channel usually controls multiple message channels. In the public switched telephone network (PSTN) one channel of a communications link is typically used for the sole purpose of carrying signaling for establishment and tear down of telephone calls. The remaining channels are used entirely for the transmission of voice messages. In most cases, a single channel is sufficient to handle the call setup and call clear-down traffic for numerous bearer (voice and data) channels. The technical alternative to CCS is channel-associated signaling (CAS), in which each bearer channel has a dedicated signaling channel. CCS offers the following advantages over CAS, in the context of the PSTN: * Faster call set-up time * Greater trunking efficiency due to the qui ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Robbed-bit Signaling
In communications systems, robbed-bit signaling (RBS) is a scheme to provide maintenance and line signaling services on many T1 digital carrier circuits using channel-associated signaling (CAS). The T1 carrier circuit is a type of dedicated circuit currently employed in North America and Japan. Context The T1 circuit is divided into 24 channels, each carrying 8,000 samples per second, each 8 bits long. The Super Frame (SF) consist of 12 frames of 24 channels. The DS1 designation consist of 24 frames called, Extended Super Frame (ESF). In either designation, these channels are multiplexed together and sample at 8000bit/s. In the superframe, ten frames are utilized entirely for voice/data and two are utilized partially for voice. Hence, each of the two partial frames yields bit/s = 56kbit/s for voice data per channel, compared to the bit/s = 64kbit/s per channel in the other frames. Intuitively, 5 out of 6 frames have 8-bit resolution equal to 64kbit/s (8 bits × 8,000 samples p ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
