|
Buccaneer 220
The Buccaneer 220 is an American trailerable sailboat, designed by Gary Mull and first built in 1978. The design is now out of production. Production The boat was built by Buccaneer Yachts/ US Yachts, a division of Bayliner, which is itself a division of the Brunswick Boat Group, which is in turn owned by the Brunswick Corporation. The design was later developed into the US Yachts US 22. Design The Buccaneer 220 is a small recreational keelboat, built predominantly of fiberglass, with wood trim. It has a fractional sloop rig, a transom hung rudder, a shoal-draft fin keel and may be fitted with a spinnaker for downwind sailing. It displaces , carries of ballast and has a hull speed of . The Buccaneer 220 has a PHRF racing average handicap of 237 with a high of 258 and low of 228. See also * List of sailing boat types ;Similar sailboats * Alberg 22 *Cape Dory 22 *Core Sound 20 Mark 3 *CS 22 *DS-22 *Edel 665 * Flicka 20 *Hunter 20 * Nonsuch 22 * Pearson Electra *Santan ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Fractional Rig
A fractional rig on a sailing vessel consists of a foresail, such as a jib or genoa sail, that does not reach all the way to the top of the mast. The forestay is a wire that secures the mast to the front of the boat. With a fractional rig, the forestay is attached between about 1/8 and 1/4 of the length of the mast lower down, rather than being attached to the top of the mast as in a masthead rig. The foresail (jib or genoa) is then rigged to this stay. The mast is farther forward on the boat than on a masthead rig and so it has a larger mainsail. Masthead rigs are most common on larger keelboats or cruisers. A fractional rig is typically used on sailing dinghies and racing oriented keelboats, such as the J/24. Fractional rigs were introduced on race boats in order to allow more controllability of the surface of the mainsail and also less drag when sailing upwind. According to one manufacturer, "a key to making fast boats easier to sail than slow boats is the 'fractional rig' ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Performance Handicap Racing Fleet
Performance Handicap Racing Fleet (PHRF) is a handicapping system used for yacht racing in North America. It allows dissimilar classes of sailboats to be raced against each other. The aim is to cancel out the inherent advantages and disadvantages of each class of boats, so that results reflect crew skill rather than equipment superiority. PHRF is used mainly for larger sailboats (i.e., 7 meters and above). For dinghy racing, the Portsmouth yardstick handicapping system is more likely to be used. The handicap number assigned to a class of yachts is based on the yacht's speed relative to a theoretical yacht with a rating of 0. A yacht's handicap, or rating, is the number of seconds per mile traveled that the yacht in question should be behind the theoretical yacht. Most boats have a positive PHRF rating, but some very fast boats have a negative PHRF rating. If Boat A has a PHRF rating of 15 and Boat B has a rating of 30 and they compete on a 1 mile course, Boat A should finish a ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Starwind 223
The Starwind 223 is an American trailerable sailboat, that was designed by Cortland Steck and first built in 1984.Henkel, Steve: ''The Sailor's Book of Small Cruising Sailboats'', page 208. International Marine/McGraw-Hill, 2010. Production The design was built by the Starwind division of Wellcraft Marine Corp in the United States from 1982 to 1984 and then by Rebel Industries near Sarasota, Florida from 1985 to 1987. Design The Starwind 223 is a small recreational keelboat, built predominantly of fiberglass, with wood trim. It has a fractional sloop, a raked stem, a reverse transom, a transom-hung rudder controlled by a tiller and a retractable centerboard keel. It displaces and carries of ballast. The boat has a draft of with the centerboard extended and with it retracted, allowing ground transportation on a trailer. The boat is normally fitted with a small outboard motor for docking and maneuvering. The design has sleeping accommodation for four people, wit ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Santana 22
The Santana 22 is an American trailerable sailboat, that was designed by Gary Mull and first built in 1966.Henkel, Steve: ''The Sailor's Book of Small Cruising Sailboats'', page 198. International Marine/McGraw-Hill, 2010. Production The boat was built by W. D. Schock Corporation in the United States from 1966 to 2010. Some were also built in Australia by the Triton Boat Company. A total of 800 were completed, but the design is currently out of production. W. D. Schock Corp records indicate that they built 747 boats between 1969 and 1979. Design The Santana 22 was Mull's first design, commissioned by Bill Schock, whom Mull had met in 1965. Mull described the design process, "Bill Schock kept saying, 'What would you do if you were going to draw a boat that would be faster than a Cal 20?' That was the real yardstick boat at that time. We were sketching on the backs of napkins, as we do. "Right after that lunch, I had to fly to New York, and when I came back, there were all ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Pearson Electra
The Pearson Electra is an American trailerable sailboat that was designed by Carl Alberg as a Midget Ocean Racing Club (MORC) racer and first built in 1960.Henkel, Steve: ''The Sailor's Book of Small Cruising Sailboats'', page 190. International Marine/McGraw-Hill, 2010. The Electra design was developed into the Pearson Ensign in 1962, primarily by enlarging the cockpit and shrinking the cabin. The two boats share the same hull design. Production The Electra was the second design built by Pearson Yachts. A total of 350 examples were completed before production ended. Design The Electra is a recreational keelboat, built predominantly of fiberglass, with wood trim. It has a masthead sloop rig, a spooned raked stem, a raised reverse transom, a keel-mounted rudder controlled by a tiller and a fixed long keel. It displaces and carries of ballast. The design has a draft of with the standard long keel and is normally fitted with a small outboard motor for docking and maneuve ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Nonsuch 22
The Nonsuch 22 is a Canadian trailerable sailboat, the smallest of the series of Nonsuch sailboats. It was designed by Mark Ellis Design and first built in 1984.Henkel, Steve: ''The Sailor's Book of Small Cruising Sailboats'', page 185. International Marine/McGraw-Hill, 2010. The design is a scaled-down development of the original, larger Nonsuch 30. Production The design was built by Hinterhoeller Yachts in St. Catharines, Ontario, Canada starting in 1984. It went out of production in about 1990. A total of 58 examples were built before production ended. Design The Nonsuch 22 is a small recreational keelboat, built predominantly of fiberglass. It has a catboat rig, an unstayed mast, with a wishbone boom, a plumb stem, a square transom, an internally-mounted spade-type rudder A rudder is a primary control surface used to steer a ship, boat, submarine, hovercraft, aircraft, or other vehicle that moves through a fluid medium (generally air or water). On an ai ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Hunter 20
The Hunter 20 is an American trailerable sailboat that was designed by Cortland Steck as daysailer and small cruiser and first built in 1983.Henkel, Steve: ''The Sailor's Book of Small Cruising Sailboats'', page 104. International Marine/McGraw-Hill, 2010. Production The design was built by Hunter Marine in the United States between 1983-1984, but it is now out of production. Design The Hunter 20 is a recreational keelboat, built predominantly of fiberglass, with wood trim. It has a fractional sloop rig, a raked stem, a vertical transom, a transom-hung rudder controlled by a tiller, a "pop-up" companionway hatch and a retractable centerboard. It displaces and carries of ballast. The boat has a draft of with the centreboard extended and with it retracted, allowing beaching or ground transportation on a trailer. Standard equipment includes a stove and cooler, toilet, life jackets and an anchor. The design has sleeping accommodation for five people, with a double "V"-b ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Flicka 20
The Flicka 20 is an American trailerable sailboat designed by Bruce Bingham as a cruiser and first built in 1974.Henkel, Steve: ''The Sailor's Book of Small Cruising Sailboats'', page 120. International Marine/McGraw-Hill, 2010. The design has a length overall of and a waterline length of . Including the bowsprit the total length is .Sherwood, Richard M.: ''A Field Guide to Sailboats of North America, Second Edition'', pages 156-157. Houghton Mifflin Company, 1994. The Flicka 20 was developed into the larger Allegra 24. Production The design was originally sold in the form of plans for amateur construction, with more than 200 sets of plans sold. Bingham, the designer, commenced the construction of a plug for a hull of his own, but was compelled to sell it before it was completed to Nor'Star Fiberglass Yachts in California United States, who put the boat into production. Nor'Star produced kits for owner completion and also ready-to-sail boats, built under contract by W ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Edel 665
The Edel 665 is a French sailboat, that was designed by Maurice Edel and first built in 1984. It was marketed as the Edel 660 in France and is sometimes referred to as the Edel 6.Sherwood, Richard M.: ''A Field Guide to Sailboats of North America, Second Edition'', pages 144-145. Houghton Mifflin Company, 1994. Production The design was built by Construction Nautic Edel in France and also at its Canadian subsidiary, Edel Canada. Between 1975 and 1984 a total of 900 examples were completed. Design The Edel 665 is a small recreational keelboat, built predominantly of fiberglass, with mahogany wood trim. It has a fractional sloop rig, a raked stem, a vertical transom, a skeg-mounted spade-type rudder controlled by a tiller and a fixed fin keel. It displaces and carries of ballast. The boat has a draft of with the standard keel fitted. The boat is normally fitted with a small outboard motor for docking and maneuvering. Features include a lifting eye on the keel to facilit ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
DS-22
The DS-22 is a Canadian trailerable sailboat, that was designed by Bruce Kirby and first built in 1983. The DS-22 is a development of the 1976 Vision 660. Production The boat was built by Diller-Schwill in Odessa, Ontario, Canada, but it is now out of production. Design The DS-22 is a small recreational keelboat, built predominantly of fiberglass, with wood trim. It has a masthead sloop rig, a transom-hung rudder and a fixed keel with a centreboard. It displaces and carries of ballast. The boat has a draft of with the centreboard extended and with it retracted. The boat is normally fitted with a small outboard motor for docking and maneuvering. The boat has a PHRF racing average handicap of 255 with a high of 252 and low of 258. It has a hull speed of . Operational history In a review Michael McGoldrick wrote, "The DS 22 is good looking boat with a swing keel and sensible cabin layout. Some of these boat were built with a main hatch which lifted to provide over 6 f ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
CS 22
The CS 22 is a Canadian trailerable sailboat, that was designed by John A. Butler and first built in 1971. The design is out of production.Henkel, Steve: ''The Sailor's Book of Small Cruising Sailboats'', page 165. International Marine/McGraw-Hill, 2010. Production The boat was built by CS Yachts in Canada. The company produced 500 CS 22s between 1971 and 1976, when production ended. Design The CS 22 is a small recreational sailboat, built predominantly of fibreglass, with wood trim. It has a fractional sloop rig, a transom-hung rudder and a retractable centreboard with a stub keel. It displaces and carries of ballast. The boat has a draft of with the centreboard down and with the centreboard up. The design has sleeping accommodation for four people, with a double "V"-berth in the bow cabin, a drop-down dinette table berth and a quarter berth on the starboard side, aft. The galley is located on the starboard side just forward of the companionway ladder. The galley is ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Core Sound 20 Mark 3
The Core Sound 20 Mark 3 is an American sailboat that was designed by B&B Yacht Designs for Cruising (maritime), cruising and first built in 2014. The boat is supplied as a series of kits and plans for Homebuilt machines, amateur construction. The Core Sound 20 Mark 3 is a development of the Core Sound 20 and is named for the Core Sound, North Carolinian body of water. Production The design's kits are supplied by B&B Yacht Designs of Bayboro, North Carolina, United States. The kit includes pre-cut wooden components, cut with a CNC machine. There are individual kits for the hull, portals, centerboard and rudder, Mast (sailing), masts, sails, rigging and lines, epoxy and fiberglass. Additional wood is required for hull stringers and other parts to complete the boat. Design The Core Sound 20 Mark 3 is a recreational keelboat, built predominantly of stitch and glue Aucoumea klaineana, okume wood, with two unstayed aluminum masts. It has a loose-footed catboat, cat ketch rig with ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
