|
British Racing Motors V16
The British Racing Motors V16 was a supercharged 1.5-litre (90.8 cu. in.) V-16 cylinder racing engine built by British Racing Motors (BRM) for competing in Formula One motor racing in the immediate aftermath of World War II. Designed in 1947 and raced until 1954–55, it produced at 12,000 rpm, although test figures from Rolls-Royce suggested that the engine would be able to be run at up to 14,000rpm. The very complex engine was exceptionally powerful for the time, but it initially proved a disappointment, possessing poor reliability so that cars either did not start or failed to finish races. In the 1952 Formula One season, after BRM withdrew their V16 engined cars before a race in Turin while attempting to enlist Juan Manuel Fangio, leaving only Ferrari as the main contestants with no effective competition, the racing organisers abandoned the Formula One series and ran the remaining year's races as Formula Two. Development The engine was designed by a team consisting of Peter ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
British Racing Motors
British Racing Motors (BRM) was a British Formula One motor racing team. Founded in 1945 and based in the market town of Bourne in Lincolnshire, it participated from 1951 to 1977, competing in 197 grands prix and winning seventeen. BRM won the constructors' title in 1962 when its driver Graham Hill became world champion. In 1963, 1964, 1965 and 1971, BRM came second in the constructors' competition. History BRM was founded just after the Second World War by Raymond Mays, who had built several hillclimb and road racing cars under the ERA brand before the war, and Peter Berthon, a long-time associate. Mays' pre-war successes (and access to pre-war Mercedes-Benz and Auto Union design documents) inspired him to build an all-British grand prix car for the post-war era as a national prestige project, with financial and industrial backing from the British motor industry and its suppliers channelled through a trust fund. This proved to be an unwieldy way of organising and fina ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Peter Berthon
Peter may refer to: People * List of people named Peter, a list of people and fictional characters with the given name * Peter (given name) ** Saint Peter (died 60s), apostle of Jesus, leader of the early Christian Church * Peter (surname), a surname (including a list of people with the name) Culture * Peter (actor) (born 1952), stage name Shinnosuke Ikehata, Japanese dancer and actor * ''Peter'' (album), a 1993 EP by Canadian band Eric's Trip * ''Peter'' (1934 film), a 1934 film directed by Henry Koster * ''Peter'' (2021 film), Marathi language film * "Peter" (''Fringe'' episode), an episode of the television series ''Fringe'' * ''Peter'' (novel), a 1908 book by Francis Hopkinson Smith * "Peter" (short story), an 1892 short story by Willa Cather Animals * Peter, the Lord's cat, cat at Lord's Cricket Ground in London * Peter (chief mouser), Chief Mouser between 1929 and 1946 * Peter II (cat), Chief Mouser between 1946 and 1947 * Peter III (cat), Chief Mouser between 1947 a ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Back-fire
A backfire or afterburn is combustion or an explosion produced by a running internal combustion engine that occurs in the exhaust system, rather than inside the combustion chamber. It is also sometimes referred to as an afterfire, especially in cases where the word backfire is used to mean a fuel burn that occurs while an intake valve is open, causing the fire to move backward through the system and out through the intake instead of the exhaust. When the flame moves backward it may also be called a "pop-back." A backfire can be caused either by ignition that happens with an exhaust valve open or unburnt fuel making its way in the hot exhaust system. A visible flame may momentarily shoot out of the exhaust pipe. A backfire is often a sign that the engine is improperly-tuned. The term derives from parallel experiences with early unreliable firearms or ammunition in which the explosive force was directed out at the breech instead of the muzzle. That is the origin of the use of "b ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Inlet Manifold
In automotive engineering, an inlet manifold or intake manifold (in American English) is the part of an engine that supplies the fuel/air mixture to the cylinders. The word '' manifold'' comes from the Old English word ''manigfeald'' (from the Anglo-Saxon ''manig'' anyand ''feald'' epeatedly and refers to the multiplying of one (pipe) into many.manifold, (adv.) "in the proportion of many to one, by many times". AD1526 ''Oxford English Dictionary'', In contrast, an exhaust manifold collects the exhaust gases from multiple cylinders into a smaller number of pipes – often down to one pipe. The primary function of the intake manifold is to ''evenly'' distribute the combustion mixture (or just air in a direct injection engine) to each intake port in the cylinder head(s). Even distribution is important to optimize the efficiency and performance of the engine. It may also serve as a mount for the carburetor, throttle body, fuel injectors and other components of the engi ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Flame Trap
A flame arrester (also spelled arrestor), deflagration arrester, or flame trap are safety devices fitted to openings of enclosures or to pipe work, and are intended to allow flow but prevent flame transmission fuel combustion by extinguishing the flame. Usage and applications The uses of a flame arrester include: *Stopping the spread of an open fire *Limiting the spread of an already occurred explosion *Preventing potentially explosive mixtures from igniting *Confining fire within a controlled location *Stopping the propagation of a flame traveling at subsonic velocities Some common objects that have flame arresters are: * Fuel storage tank vents * Fuel gas pipelines * Safety storage cabinets for paint, aerosol cans, and other flammable mixtures * The exhaust system of internal combustion engines * The air intake of marine inboard engines * Davy lamps in coal mining * Overproof rum and other flammable liquors. * Portable plastic gasoline containers Principles Flame arrest ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
David Brown Ltd
David Brown Engineering Limited is an English engineering company, principally engaged in the manufacture of gears and gearboxes. Their major gear manufacturing plant is in Swan Lane, Lockwood, Huddersfield, adjacent to Lockwood railway station. It is named after the company's founder, David Brown, though it is more closely associated with his grandson, Sir David Brown (1904–1993). History David Brown Founded in 1860 as a pattern manufacturing company, by 1873 David Brown had begun to concentrate on gear systems and by 1898 was specialising in machine-cut gears. The company moved in 1902 to Park Works at Huddersfield, where the firm is based today. David Brown & Sons, Huddersfield (the Huddersfield group) When David Brown died in 1903, his sons Percy and Frank took over and began the manufacture of gears, complete gear units, gear cutting machines, tools and equipment, bearings and shafts and worm drive gears. Its foundry makes steel and non-ferrous castings. Including ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Sump
A sump is a low space that collects often undesirable liquids such as water or chemicals. A sump can also be an infiltration basin used to manage surface runoff water and recharge underground aquifers. Sump can also refer to an area in a cave where an underground flow of water exits the cave into the earth. Examples One common example of a sump is the lowest point in a basement, into which flows water that seeps in from outside. If this is a regular problem, a sump pump that moves the water outside of the house may be used. Another example is the oil pan of an engine. The oil is used to lubricate the engine's moving parts and it pools in a reservoir known as its sump, at the bottom of the engine. Use of a sump requires the engine to be mounted slightly higher to make space for it. Often though, oil in the sump can slosh during hard cornering, starving the oil pump. For these reasons, racing motorcycles and piston aircraft engines are "dry sumped" using scavenge pumps and a s ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Standard Motor Company
The Standard Motor Company Limited was a motor vehicle manufacturer, founded in Coventry, England, in 1903 by Reginald Walter Maudslay. For many years, it manufactured Ferguson TE20 tractors powered by its Vanguard engine. All Standard's tractor assets were sold to Massey Ferguson in 1959. Standard purchased Triumph Motor Company, Triumph in 1945 and in 1959 officially changed its name to Standard-Triumph International and began to put the Triumph brand name on all its products. A new subsidiary took the name The Standard Motor Company Limited and took over the manufacture of the group's products. The Standard name was last used in Britain in 1963, and in India in 1988. History 1903–14 Maudslay, great-grandson of the eminent engineer Henry Maudslay, had trained under John Wolfe-Barry, Sir John Wolfe-Barry as a civil engineer. In 1902 he joined his cousin Cyril Charles Maudslay at his Maudslay Motor Company to make marine internal combustion engines. The marine engines did not ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Crankshaft
A crankshaft is a mechanical component used in a piston engine to convert the reciprocating motion into rotational motion. The crankshaft is a rotating shaft containing one or more crankpins, that are driven by the pistons via the connecting rods. The crankpins are also called ''rod bearing journals'', and they rotate within the "big end" of the connecting rods. Most modern crankshafts are located in the engine block. They are made from steel or cast iron, using either a forging, casting or machining process. Design The crankshaft located within the engine block, held in place via main bearings which allow the crankshaft to rotate within the block. The up-down motion of each piston is transferred to the crankshaft via connecting rods. A flywheel is often attached to one end of the crankshaft, in order to smoothen the power delivery and reduce vibration. A crankshaft is subjected to enormous stresses, in some cases more than per cylinder. Crankshafts for single-cylin ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
English Steel Corporation
The English Steel Corporation Ltd was a United Kingdom steel producer. The company was jointly owned by Cammell Laird and Vickers and was formed to bring together their basic steel making interests, principally in the Sheffield area but also including a plant in Openshaw, Manchester. The company was nationalised in 1951, becoming part of the Iron and Steel Corporation of Great Britain, was denationalised shortly afterwards, and renationalised and was absorbed into British Steel Corporation in 1967. It was then subsequently privatised. Eventually the present business was acquired by a management buy out in 2005 and is now called Sheffield Forgemasters Sheffield Forgemasters is a heavy engineering firm located in Sheffield, South Yorkshire, England. The company specialises in the production of large bespoke steel castings and forgings, as well as standard rolls, ingots and bars. The comp .... For more information see the constituent companies articles. Sources * Whitake ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Camshaft
A camshaft is a shaft that contains a row of pointed cams, in order to convert rotational motion to reciprocating motion. Camshafts are used in piston engines (to operate the intake and exhaust valves), mechanically controlled ignition systems and early electric motor speed controllers. Camshafts in piston engines are usually made from steel or cast iron, and the shape of the cams greatly affects the engine's characteristics. History Trip hammers are one of the early uses of a form of cam to convert rotating motion, e.g. from a waterwheel, into the reciprocating motion of a hammer used in forging or to pound grain. Evidence for these exists back to the Han Dynasty in China, and they were widespread by the medieval period. The camshaft was described in 1206 by engineer Al-Jazari. He employed it as part of his automata, water-raising machines, and water clocks such as the castle clock. Once the rotative version of the steam engine was developed in the late 18th century, the ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
V8 Engine
A V8 engine is an eight-cylinder piston engine in which two banks of four cylinders share a common crankshaft and are arranged in a V configuration. The first V8 engine was produced by the French Antoinette company in 1904, developed and used in cars and speedboats but primarily aircraft; while the American 1914–1935 ''Cadillac L-Head'' engine is considered the first road going V8 engine to be mass produced in significant quantities. The popularity of V8 engines in cars was greatly increased following the 1932 introduction of the ''Ford Flathead V8''. In the early 21st century, use of V8 engines in passenger vehicles declined as automobile manufacturers opted for more fuel efficient, lower capacity engines, or hybrid and electric drivetrains. Design V-angle The majority of V8 engines use a V-angle (the angle between the two banks of cylinders) of 90 degrees. This angle results in good engine balance, which results in low vibrations; however, the downside is a larg ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
.jpg "Click for more on -> Standard Motor Company")
