HOME
*



picture info

Blow Forward
Blow-forward is a firearm action where the propellant gas pressure and the friction of the bullet traveling down the bore drag the whole gun barrel forward to facilitate the opening of the breech. This forward barrel motion provides most of the energy required to eject a spent cartridge case and chamber a fresh round of ammunition, and contains a minimum of moving parts, and thus is more compact than other operating mechanisms of equal barrel length. Description The vast majority of repeating firearms have their barrel fixed to the receiver or largely immobile in relation to the frame, with the breech face (as part of a moving bolt or slide) moving within the frame against the barrel. In contrast, the frame of a blow-forward firearm incorporates a fixed breech face, with the barrel being mobile and sliding away from the breech (frame) during the weapon's cycling. Due to the reduced mass of rearward-traveling parts coupled with the increased mass of the forward moving part ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


picture info

Bolt (firearms)
A bolt is the part of a repeating, breechloading firearm that blocks the rear opening (breech) of the barrel chamber while the propellant burns, and moves back and forward to facilitate loading/unloading of cartridges from the magazine. The firing pin and extractor are often integral parts of the bolt. The terms "breechblock" and "bolt" are often used interchangeably or without a clear distinction, though usually, a bolt is a type of breechblock that has a nominally circular cross-section. In most automatic firearms that use delayed blowback, recoil or gas operation, the bolt itself is housed within the larger bolt carrier group (BCG), which contains additional parts that receives rearward push from a gas tube ( direct impingement) or a piston system. The slide of a self-loading pistol can be considered a bolt carrier, as it contains the same components and serves the same functions. Description In manually operated firearms such as bolt-action, lever-action, and pump-a ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


picture info

Firearm Actions
In firearms terminology, an action is the functional mechanism of a breech-loading firearm that handles (loads, locks, fires, extracts and ejects) the ammunition cartridges, or the method by which that mechanism works. Actions are technically not present on muzzleloaders, as all those are single-shot firearms with a closed off breech with the powder and projectile manually loaded from the muzzle. Instead, the muzzleloader ignition mechanism is referred to as the ''lock'' (e.g. matchlock, flintlock, caplock). Actions can be categorized in several ways, including single action versus double action, break action versus bolt action, and others. The term action can also include short, long, and magnum if it is in reference to the length of the rifle's receiver and the length of the bolt. The short action rifle usually can accommodate a cartridge length of or smaller. The long action rifle can accommodate a cartridge of , and the magnum action rifle can accommodate cartridges o ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


picture info

Gas-operated Reloading
Gas-operation is a system of operation used to provide energy to operate locked breech, autoloading firearms. In gas-operation, a portion of high-pressure gas from the cartridge being fired is used to power a mechanism to dispose of the spent case and insert a new cartridge into the chamber. Energy from the gas is harnessed through either a port in the barrel or a trap at the muzzle. This high-pressure gas impinges on a surface such as a piston head to provide motion for unlocking of the action, extraction of the spent case, ejection, cocking of the hammer or striker, chambering of a fresh cartridge, and locking of the action. History The first mention of using a gas piston in a single-shot breech-loading rifle comes from 1856, by the German Edward Lindner who patented his invention in the United States and Britain. In 1866, Englishman William Curtis filed the first patent on a gas-operated repeating rifle, but subsequently failed to develop that idea further. Between ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


Recoil Operation
Recoil operation is an operating mechanism used to implement locked breech, autoloading firearms. Recoil operated firearms use the energy of recoil to cycle the action, as opposed to gas operation or blowback operation using the pressure of the propellant gas. The earliest mention of recoil used to assist the loading of firearms is sometimes claimed to be in 1663 when an Englishman called Palmer proposed to employ either it or gases tapped along a barrel to do so. However no one has been able to verify this claim in recent times, although there is another automatic gun that dates from the same year, but its type and method of operation are unknown. Recoil-operation, if it was invented in 1663, would then lay dormant until the 19th century, when a number of inventors started to patent designs featuring recoil operation; this was due to the fact that the integrated disposable cartridge (both bullet and propellant in one easily interchangeable unit) made these designs viable. The e ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


picture info

Blowback (firearms)
Blowback is a system of operation for self-loading firearms that obtains energy from the motion of the cartridge case as it is pushed to the rear by expanding gas created by the ignition of the propellant charge. Several blowback systems exist within this broad principle of operation, each distinguished by the methods used to control bolt movement. In most actions that use blowback operation, the breech is not locked mechanically at the time of firing: the inertia of the bolt and recoil , relative to the weight of the bullet, delay opening of the breech until the bullet has left the barrel. A few locked breech designs use a form of blowback (example: primer actuation) to perform the unlocking function. The blowback principle may be considered a simplified form of gas operation, since the cartridge case behaves like a piston driven by the powder gases. Other operating principles for self-loading firearms include delayed blowback, blow forward, gas operation, and recoil operat ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


picture info

List Of Blow-forward Firearms
Below is the list of blow-forward weapons References {{Reflist Firearm actions blow forward Blow-forward is a firearm action where the propellant gas pressure and the friction of the bullet traveling down the bore drag the whole gun barrel forward to facilitate the opening of the breech. This forward barrel motion provides most of th ...
...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


Mk 20 Mod 0 Grenade Launcher
The Mk 20 Mod 0 was a 40mm automatic grenade launcher manufactured by NOS Louisville which was used by the US Navy during the Vietnam War. It used a blow-forward mechanism that was previously used on semi-automatic pistols such as the Steyr Mannlicher M1894 and Schwarzlose Model 1908. The Mk 20 was eventually replaced by the Mk 19 Mod 3. See also *Comparison of automatic grenade launchers *Mk 18 Mod 0 grenade launcher A Mk 18 grenade launcher in use on a M2 Browning machine guns) ">M2_Browning.html" ;"title="Patrol Craft Fast (on top of the dual .50 M2 Browning">M2 Browning machine guns) The Mk 18 Mod 0 was a 40x46mm grenade launcher used by the United State ... ReferencesMk20 Mod 0 {{Blow forward firearms Blow forward firearms Automatic grenade launchers 40×46mm grenade launchers Autocannon Machine guns of the United States 40 mm artillery Military equipment introduced in the 1960s ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


Hino Komuro M1908 Pistol
Hino may refer to: Places Estonia * Hino, Põlva County * Hino, Võru County ** Lake Hino Japan * Hino, Shiga * Hino, Tokyo * Hino, Tottori ** Hino District, Tottori ** Hino River Transportation * Hino Motors, a Japanese truck manufacturer owned by Toyota ** Hino Pakistan * Hino Station (other), railway stations in Japan: ** Hino Station (Nagano), a railway station Susuka, Nagano, operated by Nagano Electric Railway ** Hino Station (Shiga), a railway station operated by Ohmi Railway ** Hino Station (Tokyo), a railway station operated by East Japan Railway Company Other uses * Hino (surname), a Japanese surname * Hé-no Hé-no is a thunder spirit of the Iroquois and Seneca people. He is also known as Heno, Hino, Hinu or Hinun. Hé-no lives in the cloud of the far west, and has rainbow as his wife, and is accompanied by the eagles Keneu and Oshadagea. Keneu is a ..., also called Hino, an Iroquois thunder spirit See also * Heino (other) {{disambig ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  




Schwarzlose Model 1908
The Schwarzlose Model 1908 was a semi-automatic pistol, designed by Andreas Schwarzlose, released in 1908 in the German Empire The German Empire (),Herbert Tuttle wrote in September 1881 that the term "Reich" does not literally connote an empire as has been commonly assumed by English-speaking people. The term literally denotes an empire – particularly a hereditary ... and produced until 1911. Operation The Schwarzlose employs a very distinctive "blow-forward action" operating mechanism. It has no slide, instead the mechanism is operated by the barrel being projected forward due to the gas pressure and the friction of the bullet passing through the bore, the compressed recoil spring drives the barrel back, stripping the top cartridge from the magazine, chambering the round, and pressing the cartridge head against the standing breech, which is part of the frame. See also * Hino Komuro M1908 Pistol * Schwarzlose MG M.07/12 * Steyr Mannlicher M1894 Referen ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


picture info

Mannlicher M1894
The Mannlicher M1894 was an early blow-forward semi-automatic pistol. General features The earliest Ferdinand Mannlicher pistol, manufactured by Fabrique D'Armes de Neuhausen, Switzerland, was designed to be self-loading and to use a special rimmed cartridge in 6.5 mm caliber. The design represented an entirely new utilization of mechanical principles in automatic action called "blow-forward action". In the standard type of automatic action for low-powered cartridges, the recoil (or blow-back) is utilized to drive back a movable breech face or block, but Mannlicher utilized the principle of a rigid standing breech with the barrel blowing forward to extract, eject, and prepare for reloading. A special barrel housing which carries the sight covers the entire length of the barrel (6.49 in/165 mm) when the arm is closed. A heavy recoil spring is mounted concentrically around the barrel within this housing and is compressed between a shoulder at the forward end of ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


picture info

Pistol Slide
The slide on the majority of fully/semi-automatic pistols is the upper part that reciprocates ("slides") with recoil during the gun's operating cycle. It serves as the bolt carrier group (BCG) and partly as the receiver, and generally houses the firing pin/ striker, the extractor and frequently also the barrel, and provides a mounting platform for iron and optical sights. Through the principles of short recoil or simple blowback operations, the slide is moved backwards with each shot by the energy of expanding gasses caused by the combusting propellant (often a nitrocellulose-based smokeless powder, very rarely black powder). Because the slide is spring-loaded, once at the rearmost position, the spring tension will push it back towards the front. Generally, this slide movement cycle serves three functions: the extractor will empty the chamber by pulling out the spent casing from the previous shot (which then gets removed out of the gun by the ejector), the slide inertia ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]