|
Advanced Communications Riser
{{unreferenced, date=June 2009, bot=yes The Advanced Communications Riser, or ACR, is a form factor and technical specification for PC motherboard expansion slots. It is meant as a supplement to PCI slots, a replacement for the original Audio/modem riser (AMR) slots, and a competitor and alternative to Intel's communications and networking riser (CNR) slots. Technology The ACR specification provides a lower cost method to connect certain expansion cards to a computer, with an emphasis on audio and communications devices. Sound cards and modems are the most common devices to use the specification. ACR and other riser cards lower hardware costs by offloading much of the computing tasks of the peripheral to the CPU. ACR uses a 120 pin PCI connector which is reversed and offset, retaining backward compatibility with 46 pin AMR cards while including support for newer technologies. It is also more cost-effective and simple for the manufacturer, since the connectors are identical to t ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Peripheral
A peripheral or peripheral device is an auxiliary device used to put information into and get information out of a computer. The term ''peripheral device'' refers to all hardware components that are attached to a computer and are controlled by the computer system, but they are not the core components of the computer, such as the CPU or power supply unit. In other words, peripherals can also be defined as devices that can be easily removed and plugged into a computer system. Several categories of peripheral devices may be identified, based on their relationship with the computer: *An ''input device'' sends data or instructions to the computer, such as a mouse, keyboard, graphics tablet, image scanner, barcode reader, game controller, light pen, light gun, microphone and webcam; *An ''output device'' provides output data from the computer, such as a computer monitor, projector, printer, headphones and computer speaker; *An ''input/output device'' performs both input and output fun ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
GeoPort
GeoPort is a serial data system used on some models of the Apple Macintosh that could be externally clocked to run at a 2 Mbit/s data rate. GeoPort slightly modified the existing Mac serial port pins to allow the computer's internal DSP hardware or software to send data that, when passed to a digital-to-analog converter, emulated various devices such as modems and fax machines. GeoPort could be found on late-model 68K-based machines (the AV series) as well as many pre-USB Power Macintosh models and PiPPiN. Some later Macintosh models also included an internal GeoPort via an internal connector on the Communications Slot. Apple GeoPort technology is now obsolete, and modem support is typically offered through USB. Background AppleBus and LocalTalk Early during the development of the Apple Macintosh, Apple engineers decided to use the Zilog 8530 "Serial Communications Controller" (SCC) for most input/output tasks. The SCC was relatively advanced compared to the more common UARTs of ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Mobile Daughter Card
The mobile daughter card, also known as an MDC or CDC (communications daughter card), is a notebook version of the AMR slot on the motherboard of a desktop computer. It is designed to interface with special Ethernet (EDC), modem (MDC) or bluetooth (BDC) cards. Intel MDC specification 1.0 In 1999, Intel published a specification for mobile audio/modem daughter cards. The document defines a standard connector (AMP* 3-179397-0), mechanical elements including several form factors, and electrical interface. The 30-pin connector carries power, several audio channels and AC-Link serial data. Up to two AC'97 codecs are supported on such a card. Several form factors are specified: * 45 × 27 mm * 45 × 37 mm * 55 × 27 mm with RJ11 jack * 55 × 37 mm with RJ11 jack * 45 × 55 mm * 45 × 70 mm 30-pin AMP* 3-179397-0 pinout See also * Daughter board In computing, an expansion card (also called an expansion board, adapter card, peripheral card or a ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Wireless Network
A wireless network is a computer network that uses wireless data connections between network nodes. Wireless networking is a method by which homes, telecommunications networks and business installations avoid the costly process of introducing cables into a building, or as a connection between various equipment locations. Admin telecommunications networks are generally implemented and administered using radio communication. This implementation takes place at the physical level (layer) of the OSI model network structure. Examples of wireless networks include cell phone networks, wireless local area networks (WLANs), wireless sensor networks, satellite communication networks, and terrestrial microwave networks. History Wireless networks The first professional wireless network was developed under the brand ALOHAnet in 1969 at the University of Hawaii and became operational in June 1971. The first commercial wireless network was the WaveLAN product family, developed by NCR i ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Cable Modem
A cable modem is a type of network bridge that provides bi-directional data communication via radio frequency channels on a hybrid fibre-coaxial (HFC), radio frequency over glass (RFoG) and coaxial cable infrastructure. Cable modems are primarily used to deliver broadband Internet access in the form of cable Internet, taking advantage of the high bandwidth of a HFC and RFoG network. They are commonly deployed in the Americas, Asia, Australia, and Europe. History MITRE Cablenet Internet Experiment Note (IEN) 96IEN 96 - The Cablenet Project (1979) describes an early RF cable modem system. From pages 2 and 3 of IEN 96: The ... |
Digital Subscriber Line
Digital subscriber line (DSL; originally digital subscriber loop) is a family of technologies that are used to transmit digital data over telephone lines. In telecommunications marketing, the term DSL is widely understood to mean asymmetric digital subscriber line (ADSL), the most commonly installed DSL technology, for Internet access. DSL service can be delivered simultaneously with wired telephone service on the same telephone line since DSL uses higher frequency bands for data. On the customer premises, a DSL filter on each non-DSL outlet blocks any high-frequency interference to enable simultaneous use of the voice and DSL services. The bit rate of consumer DSL services typically ranges from 256 kbit/s to over 100 Mbit/s in the direction to the customer (downstream), depending on DSL technology, line conditions, and service-level implementation. Bit rates of 1 Gbit/s have been reached. In ADSL, the data throughput in the upstream direction (the direction ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Universal Serial Bus
Universal Serial Bus (USB) is an industry standard that establishes specifications for cables, connectors and protocols for connection, communication and power supply (interfacing) between computers, peripherals and other computers. A broad variety of USB hardware exists, including 14 different connector types, of which USB-C is the most recent and the only one not currently deprecated. First released in 1996, the USB standards are maintained by the USB Implementers Forum (USB-IF). The four generations of USB are: USB 1.''x'', USB 2.0, USB 3.''x'', and USB4. Overview USB was designed to standardize the connection of peripherals to personal computers, both to communicate with and to supply electric power. It has largely replaced interfaces such as serial ports and parallel ports, and has become commonplace on a wide range of devices. Examples of peripherals that are connected via USB include computer keyboards and mice, video cameras, printers, portable media players, ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
EEPROM
EEPROM (also called E2PROM) stands for electrically erasable programmable read-only memory and is a type of non-volatile memory used in computers, usually integrated in microcontrollers such as smart cards and remote keyless systems, or as a separate chip device to store relatively small amounts of data by allowing individual bytes to be erased and reprogrammed. EEPROMs are organized as arrays of floating-gate transistors. EEPROMs can be programmed and erased in-circuit, by applying special programming signals. Originally, EEPROMs were limited to single-byte operations, which made them slower, but modern EEPROMs allow multi-byte page operations. An EEPROM has a limited life for erasing and reprogramming, now reaching a million operations in modern EEPROMs. In an EEPROM that is frequently reprogrammed, the life of the EEPROM is an important design consideration. Flash memory is a type of EEPROM designed for high speed and high density, at the expense of large erase blocks (ty ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Backward Compatibility
Backward compatibility (sometimes known as backwards compatibility) is a property of an operating system, product, or technology that allows for interoperability with an older legacy system, or with input designed for such a system, especially in telecommunications and computing. Modifying a system in a way that does not allow backward compatibility is sometimes called " breaking" backward compatibility. A complementary concept is forward compatibility. A design that is forward-compatible usually has a roadmap for compatibility with future standards and products. A related term from programming jargon is hysterical reasons or hysterical raisins (near-homophones for "historical reasons"), as the purpose of some software features may be solely to support older hardware or software versions. Usage In hardware A simple example of both backward and forward compatibility is the introduction of FM radio in stereo. FM radio was initially mono, with only one audio channel represented ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Central Processing Unit
A central processing unit (CPU), also called a central processor, main processor or just processor, is the electronic circuitry that executes instructions comprising a computer program. The CPU performs basic arithmetic, logic, controlling, and input/output (I/O) operations specified by the instructions in the program. This contrasts with external components such as main memory and I/O circuitry, and specialized processors such as graphics processing units (GPUs). The form, design, and implementation of CPUs have changed over time, but their fundamental operation remains almost unchanged. Principal components of a CPU include the arithmetic–logic unit (ALU) that performs arithmetic and logic operations, processor registers that supply operands to the ALU and store the results of ALU operations, and a control unit that orchestrates the fetching (from memory), decoding and execution (of instructions) by directing the coordinated operations of the ALU, registers and other co ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Riser Card
A Riser Card is a printed circuit board that gives a computer motherboard the option for additional expansion cards to be added to the computer. Usage Risers is usually connected to the mainboard's slot through an edge connector, though some, such as NLX and Next Unit of Computing Extreme, have the edge connector on the mainboard instead and have the mainboard plug into Risers. In general, the main purpose is to change the orientation of the expansion cards such that they fit a limited space within casing. Riser Cables Riser Cables is an evolution of Riser Cards that utilized improved specifications (specifically the use of PCI Express) and better materials, which allows further distances of data transmission and orientation flexibility than traditional riser cards. These cables used a Riser Card PCB and an edge connector on each side of the cable, with a copper alloy surrounded by a plastic insulator that allows for the further data transmission distances. These cables are ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
